L3 monitor features are enumerated during resctrl initialization and
rmid_ptrs[] that tracks all RMIDs and depends on the number of supported
RMIDs is allocated during this time.
Telemetry monitor features are enumerated during first resctrl mount and
may support a different number of RMIDs compared to L3 monitor features.
Delay allocation and initialization of rmid_ptrs[] until first mount.
Since the number of RMIDs cannot change on later mounts, keep the same set of
rmid_ptrs[] until resctrl_exit(). This is required because the limbo handler
keeps running after resctrl is unmounted and needs to access rmid_ptrs[]
as it keeps tracking busy RMIDs after unmount.
Rename routines to match what they now do:
dom_data_init() -> setup_rmid_lru_list()
dom_data_exit() -> free_rmid_lru_list()
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
The resctrl file system layer passes the domain, RMID, and event id to the
architecture to fetch an event counter.
Fetching a telemetry event counter requires additional information that is
private to the architecture, for example, the offset into MMIO space from
where the counter should be read.
Add mon_evt::arch_priv that architecture can use for any private data related
to the event. The resctrl filesystem initializes mon_evt::arch_priv when the
architecture enables the event and passes it back to architecture when needing
to fetch an event counter.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
The feature to sum event data across multiple domains supports systems with
Sub-NUMA Cluster (SNC) mode enabled. The top-level monitoring files in each
"mon_L3_XX" directory provide the sum of data across all SNC nodes sharing an
L3 cache instance while the "mon_sub_L3_YY" sub-directories provide the event
data of the individual nodes.
SNC is only associated with the L3 resource and domains and as a result the
flow handling the sum of event data implicitly assumes it is working with
the L3 resource and domains.
Reading of telemetry events does not require to sum event data so this feature
can remain dedicated to SNC and keep the implicit assumption of working with
the L3 resource and domains.
Add a WARN to where the implicit assumption of working with the L3 resource
is made and add comments on how the structure controlling the event sum
feature is used.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Add a new PERF_PKG resource and introduce package level scope for monitoring
telemetry events so that CPU hotplug notifiers can build domains at the
package granularity.
Use the physical package ID available via topology_physical_package_id()
to identify the monitoring domains with package level scope. This enables
user space to use:
/sys/devices/system/cpu/cpuX/topology/physical_package_id
to identify the monitoring domain a CPU is associated with.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
resctrl assumes that all monitor events can be displayed as unsigned decimal
integers.
Hardware architecture counters may provide some telemetry events with greater
precision where the event is not a simple count, but is a measurement of some
sort (e.g. Joules for energy consumed).
Add a new argument to resctrl_enable_mon_event() for architecture code to
inform the file system that the value for a counter is a fixed-point value
with a specific number of binary places.
Only allow architecture to use floating point format on events that the file
system has marked with mon_evt::is_floating_point which reflects the contract
with user space on how the event values are displayed.
Display fixed point values with values rounded to ceil(binary_bits * log10(2))
decimal places. Special case for zero binary bits to print "{value}.0".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
resctrl assumes that monitor events can only be read from a CPU in the
cpumask_t set of each domain. This is true for x86 events accessed with an
MSR interface, but may not be true for other access methods such as MMIO.
Introduce and use flag mon_evt::any_cpu, settable by architecture, that
indicates there are no restrictions on which CPU can read that event. This
flag is not supported by the L3 event reading that requires to be run on a CPU
that belongs to the L3 domain of the event being read.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Reading monitoring event data from MMIO requires more context than the event id
to be able to read the correct memory location. struct mon_evt is the appropriate
place for this event specific context.
Prepare for addition of extra fields to struct mon_evt by changing the calling
conventions to pass a pointer to the mon_evt structure instead of just the
event id.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
With the arrival of monitor events tied to new domains associated with a
different resource it would be clearer if the L3 resource specific functions
are more accurately named.
Rename three groups of functions:
Functions that allocate/free architecture per-RMID MBM state information:
arch_domain_mbm_alloc() -> l3_mon_domain_mbm_alloc()
mon_domain_free() -> l3_mon_domain_free()
Functions that allocate/free filesystem per-RMID MBM state information:
domain_setup_mon_state() -> domain_setup_l3_mon_state()
domain_destroy_mon_state() -> domain_destroy_l3_mon_state()
Initialization/exit:
rdt_get_mon_l3_config() -> rdt_get_l3_mon_config()
resctrl_mon_resource_init() -> resctrl_l3_mon_resource_init()
resctrl_mon_resource_exit() -> resctrl_l3_mon_resource_exit()
Ensure kernel-doc descriptions of these functions' return values are present
and correctly formatted.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
The upcoming telemetry event monitoring is not tied to the L3 resource and
will have a new domain structure.
Rename the L3 resource specific domain data structures to include "l3_"
in their names to avoid confusion between the different resource specific
domain structures:
rdt_mon_domain -> rdt_l3_mon_domain
rdt_hw_mon_domain -> rdt_hw_l3_mon_domain
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Convert the whole call sequence from mon_event_read() to resctrl_arch_rmid_read() to
pass resource independent struct rdt_domain_hdr instead of an L3 specific domain
structure to prepare for monitoring events in other resources.
This additional layer of indirection obscures which aspects of event counting depend
on a valid domain. Event initialization, support for assignable counters, and normal
event counting implicitly depend on a valid domain while summing of domains does not.
Split summing domains from the core event counting handling to make their respective
dependencies obvious.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Up until now, all monitoring events were associated with the L3 resource and it
made sense to use the L3 specific "struct rdt_mon_domain *" argument to functions
operating on domains.
Telemetry events will be tied to a new resource with its instances represented
by a new domain structure that, just like struct rdt_mon_domain, starts with
the generic struct rdt_domain_hdr.
Prepare to support domains belonging to different resources by changing the
calling convention of functions operating on domains. Pass the generic header
and use that to find the domain specific structure where needed.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
The "shareable_bits" and "bit_usage" resctrl files associated with cache
resources give insight into how instances of a cache is used.
Update the annotated capacity bitmasks displayed by "bit_usage" to include the
cache portions allocated for I/O via the "io_alloc" feature. "shareable_bits"
is a global bitmask of shareable cache with I/O and can thus not present the
per-domain I/O allocations possible with the "io_alloc" feature. Revise the
"shareable_bits" documentation to direct users to "bit_usage" for accurate
cache usage information.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/e02a0d424129fd7f3e45822a559b1c614ae4652a.1762995456.git.babu.moger@amd.com
The io_alloc feature in resctrl enables system software to configure the
portion of the cache allocated for I/O traffic. When supported, the
io_alloc_cbm file in resctrl provides access to capacity bitmasks (CBMs)
allocated for I/O devices.
Enable users to modify io_alloc CBMs by writing to the io_alloc_cbm resctrl
file when the io_alloc feature is enabled.
Mirror the CBMs between CDP_CODE and CDP_DATA when CDP is enabled to present
consistent I/O allocation information to user space.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/67609641b03ccfba18a8ee0bf9dbd1f3dcbecda3.1762995456.git.babu.moger@amd.com
Introduce the "io_alloc_cbm" resctrl file to display the capacity bitmasks
(CBMs) that represent the portions of each cache instance allocated
for I/O traffic on a cache resource that supports the "io_alloc" feature.
io_alloc_cbm resides in the info directory of a cache resource, for example,
/sys/fs/resctrl/info/L3/. Since the resource name is part of the path, it
is not necessary to display the resource name as done in the schemata file.
When CDP is enabled, io_alloc routes traffic using the highest CLOSID
associated with the CDP_CODE resource and that CLOSID becomes unusable for
the CDP_DATA resource. The highest CLOSID of CDP_CODE and CDP_DATA resources
will be kept in sync to ensure consistent user interface. In preparation for
this, access the CBMs for I/O traffic through highest CLOSID of either
CDP_CODE or CDP_DATA resource.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/55a3ff66a70e7ce8239f022e62b334e9d64af604.1762995456.git.babu.moger@amd.com
AMD's SDCIAE forces all SDCI lines to be placed into the L3 cache portions
identified by the highest-supported L3_MASK_n register, where n is the maximum
supported CLOSID.
To support this, when io_alloc resctrl feature is enabled, reserve the highest
CLOSID exclusively for I/O allocation traffic making it no longer available for
general CPU cache allocation.
Introduce user interface to enable/disable io_alloc feature and encourage users
to enable io_alloc only when running workloads that can benefit from this
functionality. On enable, initialize the io_alloc CLOSID with all usable CBMs
across all the domains.
Since CLOSIDs are managed by resctrl fs, it is least invasive to make "io_alloc
is supported by maximum supported CLOSID" part of the initial resctrl fs
support for io_alloc. Take care to minimally (only in error messages) expose
this use of CLOSID for io_alloc to user space so that this is not required from
other architectures that may support io_alloc differently in the future.
When resctrl is mounted with "-o cdp" to enable code/data prioritization,
there are two L3 resources that can support I/O allocation: L3CODE and
L3DATA. From resctrl fs perspective the two resources share a CLOSID and
the architecture's available CLOSID are halved to support this.
The architecture's underlying CLOSID used by SDCIAE when CDP is enabled is the
CLOSID associated with the CDP_CODE resource, but from resctrl's perspective
there is only one CLOSID for both CDP_CODE and CDP_DATA. CDP_DATA is thus not
usable for general (CPU) cache allocation nor I/O allocation.
Keep the CDP_CODE and CDP_DATA I/O alloc status in sync to avoid any confusion
to user space. That is, enabling io_alloc on CDP_CODE does so on CDP_DATA and
vice-versa, and keep the I/O allocation CBMs of CDP_CODE and CDP_DATA in sync.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/c7d3037795e653e22b02d8fc73ca80d9b075031c.1762995456.git.babu.moger@amd.com
Introduce the "io_alloc" resctrl file to the "info" area of a cache resource,
for example /sys/fs/resctrl/info/L3/io_alloc. "io_alloc" indicates support for
the "io_alloc" feature that allows direct insertion of data from I/O
devices into the cache.
Restrict exposing support for "io_alloc" to the L3 resource that is the only
resource where this feature can be backed by AMD's L3 Smart Data Cache
Injection Allocation Enforcement (SDCIAE). With that, the "io_alloc" file is
only visible to user space if the L3 resource supports "io_alloc".
Doing so makes the file visible for all cache resources though, for example
also L2 cache (if it supports cache allocation). As a consequence, add
capability for file to report expected "enabled" and "disabled", as well as
"not supported".
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/e8b116a8f424128b227734bb1d433c14af478d90.1762995456.git.babu.moger@amd.com
Resctrl subsystem can support two monitoring modes, "mbm_event" or "default".
In mbm_event mode, monitoring event can only accumulate data while it is
backed by a hardware counter. In "default" mode, resctrl assumes there is
a hardware counter for each event within every CTRL_MON and MON group.
Introduce mbm_assign_mode resctrl file to switch between mbm_event and default
modes.
Example:
To list the MBM monitor modes supported:
$ cat /sys/fs/resctrl/info/L3_MON/mbm_assign_mode
[mbm_event]
default
To enable the "mbm_event" counter assignment mode:
$ echo "mbm_event" > /sys/fs/resctrl/info/L3_MON/mbm_assign_mode
To enable the "default" monitoring mode:
$ echo "default" > /sys/fs/resctrl/info/L3_MON/mbm_assign_mode
Reset MBM event counters automatically as part of changing the mode. Clear
both architectural and non-architectural event states to prevent overflow
conditions during the next event read. Clear assignable counter configuration
on all the domains. Also, enable auto assignment when switching to "mbm_event"
mode.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Enable the mbm_l3_assignments resctrl file to be used to modify counter
assignments of CTRL_MON and MON groups when the "mbm_event" counter
assignment mode is enabled.
Process the assignment modifications in the following format:
<Event>:<Domain id>=<Assignment state>;<Domain id>=<Assignment state>
Event: A valid MBM event in the
/sys/fs/resctrl/info/L3_MON/event_configs directory.
Domain ID: A valid domain ID. When writing, '*' applies the changes
to all domains.
Assignment states:
_ : Unassign a counter.
e : Assign a counter exclusively.
Examples:
$ cd /sys/fs/resctrl
$ cat /sys/fs/resctrl/mbm_L3_assignments
mbm_total_bytes:0=e;1=e
mbm_local_bytes:0=e;1=e
To unassign the counter associated with the mbm_total_bytes event on
domain 0:
$ echo "mbm_total_bytes:0=_" > mbm_L3_assignments
$ cat /sys/fs/resctrl/mbm_L3_assignments
mbm_total_bytes:0=_;1=e
mbm_local_bytes:0=e;1=e
To unassign the counter associated with the mbm_total_bytes event on
all the domains:
$ echo "mbm_total_bytes:*=_" > mbm_L3_assignments
$ cat /sys/fs/resctrl/mbm_L3_assignments
mbm_total_bytes:0=_;1=_
mbm_local_bytes:0=e;1=e
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Introduce the mbm_L3_assignments resctrl file associated with CTRL_MON and MON
resource groups to display the counter assignment states of the resource group
when "mbm_event" counter assignment mode is enabled.
Display the list in the following format:
<Event>:<Domain id>=<Assignment state>;<Domain id>=<Assignment state>
Event: A valid MBM event listed in
/sys/fs/resctrl/info/L3_MON/event_configs directory.
Domain ID: A valid domain ID.
The assignment state can be one of the following:
_ : No counter assigned.
e : Counter assigned exclusively.
Example:
To list the assignment states for the default group
$ cd /sys/fs/resctrl
$ cat /sys/fs/resctrl/mbm_L3_assignments
mbm_total_bytes:0=e;1=e
mbm_local_bytes:0=e;1=e
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
The "mbm_event" counter assignment mode allows users to assign a hardware
counter to an RMID, event pair and monitor the bandwidth as long as it is
assigned.
Introduce a user-configurable option that determines if a counter will
automatically be assigned to an RMID, event pair when its associated
monitor group is created via mkdir. Accessible when "mbm_event" counter
assignment mode is enabled.
Suggested-by: Peter Newman <peternewman@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
When "mbm_event" counter assignment mode is enabled, users can modify the
event configuration by writing to the 'event_filter' resctrl file. The event
configurations for mbm_event mode are located in
/sys/fs/resctrl/info/L3_MON/event_configs/.
Update the assignments of all CTRL_MON and MON resource groups when the event
configuration is modified.
Example:
$ mount -t resctrl resctrl /sys/fs/resctrl
$ cd /sys/fs/resctrl/
$ cat info/L3_MON/event_configs/mbm_local_bytes/event_filter
local_reads,local_non_temporal_writes,local_reads_slow_memory
$ echo "local_reads,local_non_temporal_writes" >
info/L3_MON/event_configs/mbm_total_bytes/event_filter
$ cat info/L3_MON/event_configs/mbm_total_bytes/event_filter
local_reads,local_non_temporal_writes
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
The "mbm_event" counter assignment mode allows the user to assign a hardware
counter to an RMID, event pair and monitor the bandwidth as long as it is
assigned. The user can specify the memory transaction(s) for the counter to
track.
When this mode is supported, the /sys/fs/resctrl/info/L3_MON/event_configs
directory contains a sub-directory for each MBM event that can be assigned to
a counter. The MBM event sub-directory contains a file named "event_filter"
that is used to view and modify which memory transactions the MBM event is
configured with.
Create /sys/fs/resctrl/info/L3_MON/event_configs directory on resctrl mount
and pre-populate it with directories for the two existing MBM events:
mbm_total_bytes and mbm_local_bytes. Create the "event_filter" file within
each MBM event directory with the needed *show() that displays the memory
transactions with which the MBM event is configured.
Example:
$ mount -t resctrl resctrl /sys/fs/resctrl
$ cd /sys/fs/resctrl/
$ cat info/L3_MON/event_configs/mbm_total_bytes/event_filter
local_reads,remote_reads,local_non_temporal_writes,
remote_non_temporal_writes,local_reads_slow_memory,
remote_reads_slow_memory,dirty_victim_writes_all
$ cat info/L3_MON/event_configs/mbm_local_bytes/event_filter
local_reads,local_non_temporal_writes,local_reads_slow_memory
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
When "mbm_event" counter assignment mode is enabled, the architecture requires
a counter ID to read the event data.
Introduce an is_mbm_cntr field in struct rmid_read to indicate whether counter
assignment mode is in use.
Update the logic to call resctrl_arch_cntr_read() and resctrl_arch_reset_cntr()
when the assignment mode is active. Report 'Unassigned' in case the user attempts
to read an event without assigning a hardware counter.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
The "mbm_event" counter assignment mode offers "num_mbm_cntrs" number of
counters that can be assigned to RMID, event pairs and monitor bandwidth usage
as long as it is assigned. If all the counters are in use, the kernel logs the
error message "Failed to allocate counter for <event> in domain <id>" in
/sys/fs/resctrl/info/last_cmd_status when a new assignment is requested.
To make space for a new assignment, users must unassign an already assigned
counter and retry the assignment again.
Add the functionality to unassign and free the counters in the domain. Also,
add the helper rdtgroup_unassign_cntrs() to unassign counters in the group.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
When supported, "mbm_event" counter assignment mode offers "num_mbm_cntrs"
number of counters that can be assigned to RMID, event pairs and monitor
bandwidth usage as long as it is assigned.
Add the functionality to allocate and assign a counter to an RMID, event
pair in the domain. Also, add the helper rdtgroup_assign_cntrs() to assign
counters in the group.
Log the error message "Failed to allocate counter for <event> in domain
<id>" in /sys/fs/resctrl/info/last_cmd_status if all the counters are in
use. Exit on the first failure when assigning counters across all the
domains.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
