Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
Using the stricter "./tools/docs/kernel-doc -Wall -v" to verify proper
formatting of documentation comments includes warnings related to return
markup on functions that are omitted during the default verification
checks. This stricter verification reports a couple of missing return
descriptions in resctrl:
Warning: .../fs/resctrl/rdtgroup.c:1536 No description found for return value of 'rdtgroup_cbm_to_size'
Warning: .../fs/resctrl/rdtgroup.c:3131 No description found for return value of 'mon_get_kn_priv'
Warning: .../fs/resctrl/rdtgroup.c:3523 No description found for return value of 'cbm_ensure_valid'
Warning: .../fs/resctrl/monitor.c:238 No description found for return value of 'resctrl_find_cleanest_closid'
Add the missing return descriptions.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/1c50b9f7c73251c007133590986f127e1af57780.1775576382.git.reinette.chatre@intel.com
Patch series "mm: vma flag tweaks".
The ongoing work around introducing non-system word VMA flags has
introduced a number of helper functions and macros to make life easier
when working with these flags and to make conversions from the legacy use
of VM_xxx flags more straightforward.
This series improves these to reduce confusion as to what they do and to
improve consistency and readability.
Firstly the series renames vma_flags_test() to vma_flags_test_any() to
make it abundantly clear that this function tests whether any of the flags
are set (as opposed to vma_flags_test_all()).
It then renames vma_desc_test_flags() to vma_desc_test_any() for the same
reason. Note that we drop the 'flags' suffix here, as
vma_desc_test_any_flags() would be cumbersome and 'test' implies a flag
test.
Similarly, we rename vma_test_all_flags() to vma_test_all() for
consistency.
Next, we have a couple of instances (erofs, zonefs) where we are now
testing for vma_desc_test_any(desc, VMA_SHARED_BIT) &&
vma_desc_test_any(desc, VMA_MAYWRITE_BIT).
This is silly, so this series introduces vma_desc_test_all() so these
callers can instead invoke vma_desc_test_all(desc, VMA_SHARED_BIT,
VMA_MAYWRITE_BIT).
We then observe that quite a few instances of vma_flags_test_any() and
vma_desc_test_any() are in fact only testing against a single flag.
Using the _any() variant here is just confusing - 'any' of single item
reads strangely and is liable to cause confusion.
So in these instances the series reintroduces vma_flags_test() and
vma_desc_test() as helpers which test against a single flag.
The fact that vma_flags_t is a struct and that vma_flag_t utilises sparse
to avoid confusion with vm_flags_t makes it impossible for a user to
misuse these helpers without it getting flagged somewhere.
The series also updates __mk_vma_flags() and functions invoked by it to
explicitly mark them always inline to match expectation and to be
consistent with other VMA flag helpers.
It also renames vma_flag_set() to vma_flags_set_flag() (a function only
used by __mk_vma_flags()) to be consistent with other VMA flag helpers.
Finally it updates the VMA tests for each of these changes, and introduces
explicit tests for vma_flags_test() and vma_desc_test() to assert that
they behave as expected.
This patch (of 6):
On reflection, it's confusing to have vma_flags_test() and
vma_desc_test_flags() test whether any comma-separated VMA flag bit is
set, while also having vma_flags_test_all() and vma_test_all_flags()
separately test whether all flags are set.
Firstly, rename vma_flags_test() to vma_flags_test_any() to eliminate this
confusion.
Secondly, since the VMA descriptor flag functions are becoming rather
cumbersome, prefer vma_desc_test*() to vma_desc_test_flags*(), and also
rename vma_desc_test_flags() to vma_desc_test_any().
Finally, rename vma_test_all_flags() to vma_test_all() to keep the
VMA-specific helper consistent with the VMA descriptor naming convention
and to help avoid confusion vs. vma_flags_test_all().
While we're here, also update whitespace to be consistent in helper
functions.
Link: https://lkml.kernel.org/r/cover.1772704455.git.ljs@kernel.org
Link: https://lkml.kernel.org/r/0f9cb3c511c478344fac0b3b3b0300bb95be95e9.1772704455.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Suggested-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Chunhai Guo <guochunhai@vivo.com>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Configuring the io_alloc_cbm interface requires an explicit domain ID for each
cache domain. On systems with high core counts and numerous cache clusters,
this requirement becomes cumbersome for automation and management tasks that
aim to apply a uniform policy.
Introduce a wildcard domain ID selector "*" for the io_alloc_cbm interface.
This enables users to set the same Capacity Bitmask (CBM) across all cache
domains in a single operation.
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://patch.msgid.link/20260325001159.447075-3-atomlin@atomlin.com
The last_cmd_status file is intended to report details about the most recent
resctrl filesystem operation, specifically to aid in diagnosing failures.
However, when parsing io_alloc_cbm, if a user provides a domain ID that does
not exist in the resource, the operation fails with -EINVAL without updating
last_cmd_status. This results in inconsistent behaviour where the system call
returns an error, but last_cmd_status misleadingly reports "ok", leaving the
user unaware that the failure was caused by an invalid domain ID.
Write an error message to last_cmd_status when the target domain ID cannot
be found.
Fixes: 28fa2cce7a ("fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://patch.msgid.link/20260325001159.447075-2-atomlin@atomlin.com
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
L3 monitor features are enumerated during resctrl initialization and
rmid_ptrs[] that tracks all RMIDs and depends on the number of supported
RMIDs is allocated during this time.
Telemetry monitor features are enumerated during first resctrl mount and
may support a different number of RMIDs compared to L3 monitor features.
Delay allocation and initialization of rmid_ptrs[] until first mount.
Since the number of RMIDs cannot change on later mounts, keep the same set of
rmid_ptrs[] until resctrl_exit(). This is required because the limbo handler
keeps running after resctrl is unmounted and needs to access rmid_ptrs[]
as it keeps tracking busy RMIDs after unmount.
Rename routines to match what they now do:
dom_data_init() -> setup_rmid_lru_list()
dom_data_exit() -> free_rmid_lru_list()
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
resctrl assumes that only the L3 resource supports monitor events, so it
simply takes the rdt_resource::num_rmid from RDT_RESOURCE_L3 as the system's
number of RMIDs.
The addition of telemetry events in a different resource breaks that
assumption.
Compute the number of available RMIDs as the minimum value across all
mon_capable resources (analogous to how the number of CLOSIDs is computed
across alloc_capable resources).
Note that mount time enumeration of the telemetry resource means that
this number can be reduced. If this happens, then some memory will
be wasted as the allocations for rdt_l3_mon_domain::mbm_states[] and
rdt_l3_mon_domain::rmid_busy_llc created during resctrl initialization will
be larger than needed.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
closid_num_dirty_rmid[] and rmid_ptrs[] are allocated together during resctrl
initialization and freed together during resctrl exit.
Telemetry events are enumerated on resctrl mount so only at resctrl mount will
the number of RMID supported by all monitoring resources and needed as size
for rmid_ptrs[] be known.
Separate closid_num_dirty_rmid[] and rmid_ptrs[] allocation and free in
preparation for rmid_ptrs[] to be allocated on resctrl mount.
Keep the rdtgroup_mutex protection around the allocation and free of
closid_num_dirty_rmid[] as ARM needs this to guarantee memory ordering.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
There are now three meanings for "number of RMIDs":
1) The number for legacy features enumerated by CPUID leaf 0xF. This is the
maximum number of distinct values that can be loaded into MSR_IA32_PQR_ASSOC.
Note that systems with Sub-NUMA Cluster mode enabled will force scaling down
the CPUID enumerated value by the number of SNC nodes per L3-cache.
2) The number of registers in MMIO space for each event. This is enumerated in
the XML files and is the value initialized into event_group::num_rmid.
3) The number of "hardware counters" (this isn't a strictly accurate
description of how things work, but serves as a useful analogy that does
describe the limitations) feeding to those MMIO registers. This is enumerated
in telemetry_region::num_rmids returned by intel_pmt_get_regions_by_feature().
Event groups with insufficient "hardware counters" to track all RMIDs are
difficult for users to use, since the system may reassign "hardware counters"
at any time. This means that users cannot reliably collect two consecutive
event counts to compute the rate at which events are occurring.
Disable such event groups by default. The user may override this with
a command line "rdt=" option. In this case limit an under-resourced event
group's number of possible monitor resource groups to the lowest number of
"hardware counters".
Scan all enabled event groups and assign the RDT_RESOURCE_PERF_PKG resource
"num_rmid" value to the smallest of these values as this value will be used
later to compare against the number of RMIDs supported by other resources to
determine how many monitoring resource groups are supported.
N.B. Change type of resctrl_mon::num_rmid to u32 to match its usage and the
type of event_group::num_rmid so that min(r->num_rmid, e->num_rmid) won't
complain about mixing signed and unsigned types.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
The L3 resource has several requirements for domains. There are per-domain
structures that hold the 64-bit values of counters, and elements to keep
track of the overflow and limbo threads.
None of these are needed for the PERF_PKG resource. The hardware counters
are wide enough that they do not wrap around for decades.
Define a new rdt_perf_pkg_mon_domain structure which just consists of the
standard rdt_domain_hdr to keep track of domain id and CPU mask.
Update resctrl_online_mon_domain() for RDT_RESOURCE_PERF_PKG. The only action
needed for this resource is to create and populate domain directories if a
domain is added while resctrl is mounted.
Similarly resctrl_offline_mon_domain() only needs to remove domain directories.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Population of a monitor group's mon_data directory is unreasonably complicated
because of the support for Sub-NUMA Cluster (SNC) mode.
Split out the SNC code into a helper function to make it easier to add support
for a new telemetry resource.
Move all the duplicated code to make and set owner of domain directories into
the mon_add_all_files() helper and rename to _mkdir_mondata_subdir().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Introduce intel_aet_read_event() to read telemetry events for resource
RDT_RESOURCE_PERF_PKG. There may be multiple aggregators tracking each
package, so scan all of them and add up all counters. Aggregators may return
an invalid data indication if they have received no records for a given RMID.
The user will see "Unavailable" if none of the aggregators on a package
provide valid counts.
Resctrl now uses readq() so depends on X86_64. Update Kconfig.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Every event group has a private copy of the data of all telemetry event
aggregators (aka "telemetry regions") tracking its feature type. Included
may be regions that have the same feature type but tracking different GUID
from the event group's.
Traverse the event group's telemetry region data and mark all regions that
are not usable by the event group as unusable by clearing those regions'
MMIO addresses. A region is considered unusable if:
1) GUID does not match the GUID of the event group.
2) Package ID is invalid.
3) The enumerated size of the MMIO region does not match the expected
value from the XML description file.
Hereafter any telemetry region with an MMIO address is considered valid for
the event group it is associated with.
Enable all the event group's events as long as there is at least one usable
region from where data for its events can be read. Enabling of an event can
fail if the same event has already been enabled as part of another event
group. It should never happen that the same event is described by different
GUID supported by the same system so just WARN (via resctrl_enable_mon_event())
and skip the event.
Note that it is architecturally possible that some telemetry events are only
supported by a subset of the packages in the system. It is not expected that
systems will ever do this. If they do the user will see event files in resctrl
that always return "Unavailable".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
The resctrl file system layer passes the domain, RMID, and event id to the
architecture to fetch an event counter.
Fetching a telemetry event counter requires additional information that is
private to the architecture, for example, the offset into MMIO space from
where the counter should be read.
Add mon_evt::arch_priv that architecture can use for any private data related
to the event. The resctrl filesystem initializes mon_evt::arch_priv when the
architecture enables the event and passes it back to architecture when needing
to fetch an event counter.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
The telemetry event aggregators of the Intel Clearwater Forest CPU support two
RMID-based feature types: "energy" with GUID 0x26696143¹, and "perf" with
GUID 0x26557651².
The event counter offsets in an aggregator's MMIO space are arranged in groups
for each RMID.
E.g., the "energy" counters for GUID 0x26696143 are arranged like this:
MMIO offset:0x0000 Counter for RMID 0 PMT_EVENT_ENERGY
MMIO offset:0x0008 Counter for RMID 0 PMT_EVENT_ACTIVITY
MMIO offset:0x0010 Counter for RMID 1 PMT_EVENT_ENERGY
MMIO offset:0x0018 Counter for RMID 1 PMT_EVENT_ACTIVITY
...
MMIO offset:0x23F0 Counter for RMID 575 PMT_EVENT_ENERGY
MMIO offset:0x23F8 Counter for RMID 575 PMT_EVENT_ACTIVITY
After all counters there are three status registers that provide indications
of how many times an aggregator was unable to process event counts, the time
stamp for the most recent loss of data, and the time stamp of the most recent
successful update.
MMIO offset:0x2400 AGG_DATA_LOSS_COUNT
MMIO offset:0x2408 AGG_DATA_LOSS_TIMESTAMP
MMIO offset:0x2410 LAST_UPDATE_TIMESTAMP
Define event_group structures for both of these aggregator types and define
the events tracked by the aggregators in the file system code.
PMT_EVENT_ENERGY and PMT_EVENT_ACTIVITY are produced in fixed point format.
File system code must output as floating point values.
¹https://github.com/intel/Intel-PMT/blob/main/xml/CWF/OOBMSM/RMID-ENERGY/cwf_aggregator.xml
²https://github.com/intel/Intel-PMT/blob/main/xml/CWF/OOBMSM/RMID-PERF/cwf_aggregator.xml
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
The feature to sum event data across multiple domains supports systems with
Sub-NUMA Cluster (SNC) mode enabled. The top-level monitoring files in each
"mon_L3_XX" directory provide the sum of data across all SNC nodes sharing an
L3 cache instance while the "mon_sub_L3_YY" sub-directories provide the event
data of the individual nodes.
SNC is only associated with the L3 resource and domains and as a result the
flow handling the sum of event data implicitly assumes it is working with
the L3 resource and domains.
Reading of telemetry events does not require to sum event data so this feature
can remain dedicated to SNC and keep the implicit assumption of working with
the L3 resource and domains.
Add a WARN to where the implicit assumption of working with the L3 resource
is made and add comments on how the structure controlling the event sum
feature is used.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Add a new PERF_PKG resource and introduce package level scope for monitoring
telemetry events so that CPU hotplug notifiers can build domains at the
package granularity.
Use the physical package ID available via topology_physical_package_id()
to identify the monitoring domains with package level scope. This enables
user space to use:
/sys/devices/system/cpu/cpuX/topology/physical_package_id
to identify the monitoring domain a CPU is associated with.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Enumeration of Intel telemetry events is an asynchronous process involving
several mutually dependent drivers added as auxiliary devices during the
device_initcall() phase of Linux boot. The process finishes after the probe
functions of these drivers completes. But this happens after
resctrl_arch_late_init() is executed.
Tracing the enumeration process shows that it does complete a full seven
seconds before the earliest possible mount of the resctrl file system (when
included in /etc/fstab for automatic mount by systemd).
Add a hook for use by telemetry event enumeration and initialization and
run it once at the beginning of resctrl mount without any locks held.
The architecture is responsible for any required locking.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20260105191711.GBaVwON5nZn-uO6Sqg@fat_crate.local
resctrl assumes that all monitor events can be displayed as unsigned decimal
integers.
Hardware architecture counters may provide some telemetry events with greater
precision where the event is not a simple count, but is a measurement of some
sort (e.g. Joules for energy consumed).
Add a new argument to resctrl_enable_mon_event() for architecture code to
inform the file system that the value for a counter is a fixed-point value
with a specific number of binary places.
Only allow architecture to use floating point format on events that the file
system has marked with mon_evt::is_floating_point which reflects the contract
with user space on how the event values are displayed.
Display fixed point values with values rounded to ceil(binary_bits * log10(2))
decimal places. Special case for zero binary bits to print "{value}.0".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
