mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
master
1099
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
334fbe734e |
Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - "maple_tree: Replace big node with maple copy" (Liam Howlett) Mainly prepararatory work for ongoing development but it does reduce stack usage and is an improvement. - "mm, swap: swap table phase III: remove swap_map" (Kairui Song) Offers memory savings by removing the static swap_map. It also yields some CPU savings and implements several cleanups. - "mm: memfd_luo: preserve file seals" (Pratyush Yadav) File seal preservation to LUO's memfd code - "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan Chen) Additional userspace stats reportng to zswap - "arch, mm: consolidate empty_zero_page" (Mike Rapoport) Some cleanups for our handling of ZERO_PAGE() and zero_pfn - "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu Han) A robustness improvement and some cleanups in the kmemleak code - "Improve khugepaged scan logic" (Vernon Yang) Improve khugepaged scan logic and reduce CPU consumption by prioritizing scanning tasks that access memory frequently - "Make KHO Stateless" (Jason Miu) Simplify Kexec Handover by transitioning KHO from an xarray-based metadata tracking system with serialization to a radix tree data structure that can be passed directly to the next kernel - "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas Ballasi and Steven Rostedt) Enhance vmscan's tracepointing - "mm: arch/shstk: Common shadow stack mapping helper and VM_NOHUGEPAGE" (Catalin Marinas) Cleanup for the shadow stack code: remove per-arch code in favour of a generic implementation - "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin) Fix a WARN() which can be emitted the KHO restores a vmalloc area - "mm: Remove stray references to pagevec" (Tal Zussman) Several cleanups, mainly udpating references to "struct pagevec", which became folio_batch three years ago - "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl Shutsemau) Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail pages encode their relationship to the head page - "mm/damon/core: improve DAMOS quota efficiency for core layer filters" (SeongJae Park) Improve two problematic behaviors of DAMOS that makes it less efficient when core layer filters are used - "mm/damon: strictly respect min_nr_regions" (SeongJae Park) Improve DAMON usability by extending the treatment of the min_nr_regions user-settable parameter - "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka) The proper fix for a previously hotfixed SMP=n issue. Code simplifications and cleanups ensued - "mm: cleanups around unmapping / zapping" (David Hildenbrand) A bunch of cleanups around unmapping and zapping. Mostly simplifications, code movements, documentation and renaming of zapping functions - "support batched checking of the young flag for MGLRU" (Baolin Wang) Batched checking of the young flag for MGLRU. It's part cleanups; one benchmark shows large performance benefits for arm64 - "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner) memcg cleanup and robustness improvements - "Allow order zero pages in page reporting" (Yuvraj Sakshith) Enhance free page reporting - it is presently and undesirably order-0 pages when reporting free memory. - "mm: vma flag tweaks" (Lorenzo Stoakes) Cleanup work following from the recent conversion of the VMA flags to a bitmap - "mm/damon: add optional debugging-purpose sanity checks" (SeongJae Park) Add some more developer-facing debug checks into DAMON core - "mm/damon: test and document power-of-2 min_region_sz requirement" (SeongJae Park) An additional DAMON kunit test and makes some adjustments to the addr_unit parameter handling - "mm/damon/core: make passed_sample_intervals comparisons overflow-safe" (SeongJae Park) Fix a hard-to-hit time overflow issue in DAMON core - "mm/damon: improve/fixup/update ratio calculation, test and documentation" (SeongJae Park) A batch of misc/minor improvements and fixups for DAMON - "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David Hildenbrand) Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code movement was required. - "zram: recompression cleanups and tweaks" (Sergey Senozhatsky) A somewhat random mix of fixups, recompression cleanups and improvements in the zram code - "mm/damon: support multiple goal-based quota tuning algorithms" (SeongJae Park) Extend DAMOS quotas goal auto-tuning to support multiple tuning algorithms that users can select - "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao) Fix the khugpaged sysfs handling so we no longer spam the logs with reams of junk when starting/stopping khugepaged - "mm: improve map count checks" (Lorenzo Stoakes) Provide some cleanups and slight fixes in the mremap, mmap and vma code - "mm/damon: support addr_unit on default monitoring targets for modules" (SeongJae Park) Extend the use of DAMON core's addr_unit tunable - "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache) Cleanups to khugepaged and is a base for Nico's planned khugepaged mTHP support - "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand) Code movement and cleanups in the memhotplug and sparsemem code - "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup CONFIG_MIGRATION" (David Hildenbrand) Rationalize some memhotplug Kconfig support - "change young flag check functions to return bool" (Baolin Wang) Cleanups to change all young flag check functions to return bool - "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh Law and SeongJae Park) Fix a few potential DAMON bugs - "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo Stoakes) Convert a lot of the existing use of the legacy vm_flags_t data type to the new vma_flags_t type which replaces it. Mainly in the vma code. - "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes) Expand the mmap_prepare functionality, which is intended to replace the deprecated f_op->mmap hook which has been the source of bugs and security issues for some time. Cleanups, documentation, extension of mmap_prepare into filesystem drivers - "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes) Simplify and clean up zap_huge_pmd(). Additional cleanups around vm_normal_folio_pmd() and the softleaf functionality are performed. * tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm: fix deferred split queue races during migration mm/khugepaged: fix issue with tracking lock mm/huge_memory: add and use has_deposited_pgtable() mm/huge_memory: add and use normal_or_softleaf_folio_pmd() mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio() mm/huge_memory: separate out the folio part of zap_huge_pmd() mm/huge_memory: use mm instead of tlb->mm mm/huge_memory: remove unnecessary sanity checks mm/huge_memory: deduplicate zap deposited table call mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE() mm/huge_memory: add a common exit path to zap_huge_pmd() mm/huge_memory: handle buggy PMD entry in zap_huge_pmd() mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc mm/huge: avoid big else branch in zap_huge_pmd() mm/huge_memory: simplify vma_is_specal_huge() mm: on remap assert that input range within the proposed VMA mm: add mmap_action_map_kernel_pages[_full]() uio: replace deprecated mmap hook with mmap_prepare in uio_info drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare mm: allow handling of stacked mmap_prepare hooks in more drivers ... |
||
|
|
f2729827ae |
Merge tag 'nilfs2-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2
Pull nilfs2 updates from Viacheslav Dubeyko:
"This contains fixes of syzbot reported issues in NILFS2 functionality:
- The DAT inode's btree node cache (i_assoc_inode) is initialized
lazily during btree operations.
However, nilfs_mdt_save_to_shadow_map() assumes i_assoc_inode is
already initialized when copying dirty pages to the shadow map
during GC. If NILFS_IOCTL_CLEAN_SEGMENTS is called immediately
after mount before any btree operation has occurred on the DAT
inode, i_assoc_inode is NULL leading to a general protection fault.
Fix this by calling nilfs_attach_btree_node_cache() on the DAT
inode in nilfs_dat_read() at mount time, ensuring i_assoc_inode is
always initialized before any GC operation can use it (Deepanshu
Kartikey)
- nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead
blocks by comparing it with the current block number bd_blocknr. If
they differ, the block is considered dead and skipped.
A corrupted ioctl request with bd_oblocknr set to 0 causes the
comparison to incorrectly match when the lookup returns -ENOENT and
sets bd_blocknr to 0, bypassing the dead block check and calling
nilfs_bmap_mark() on a non- existent block. This causes
nilfs_btree_do_lookup() to return -ENOENT, triggering the
WARN_ON(ret == -ENOENT).
Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at
the beginning of each iteration (Deepanshu Kartikey)"
* tag 'nilfs2-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2:
nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty()
nilfs2: fix NULL i_assoc_inode dereference in nilfs_mdt_save_to_shadow_map
|
||
|
|
4e1d77a8f3 |
folio_batch: rename pagevec.h to folio_batch.h
struct pagevec was removed in commit
|
||
|
|
be3e5d1064 |
nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty()
nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks
by comparing it with the current block number bd_blocknr. If they differ,
the block is considered dead and skipped.
However, bd_oblocknr should never be 0 since block 0 typically stores the
primary superblock and is never a valid GC target block. A corrupted ioctl
request with bd_oblocknr set to 0 causes the comparison to incorrectly
match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing
the dead block check and calling nilfs_bmap_mark() on a non-existent
block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering
the WARN_ON(ret == -ENOENT).
Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the
beginning of each iteration.
[ryusuke: slightly modified the commit message and comments for accuracy]
Fixes:
|
||
|
|
4a4e0328ed |
nilfs2: fix NULL i_assoc_inode dereference in nilfs_mdt_save_to_shadow_map
The DAT inode's btree node cache (i_assoc_inode) is initialized lazily
during btree operations. However, nilfs_mdt_save_to_shadow_map()
assumes i_assoc_inode is already initialized when copying dirty pages
to the shadow map during GC.
If NILFS_IOCTL_CLEAN_SEGMENTS is called immediately after mount before
any btree operation has occurred on the DAT inode, i_assoc_inode is
NULL leading to a general protection fault.
Fix this by calling nilfs_attach_btree_node_cache() on the DAT inode
in nilfs_dat_read() at mount time, ensuring i_assoc_inode is always
initialized before any GC operation can use it.
Reported-by: syzbot+4b4093b1f24ad789bf37@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4b4093b1f24ad789bf37
Tested-by: syzbot+4b4093b1f24ad789bf37@syzkaller.appspotmail.com
Fixes:
|
||
|
|
81359c146f |
nilfs2: fix 64-bit division operations in nilfs_bmap_find_target_in_group()
With the change to make inode->i_ino a u64, the build started failing on
32-bit ARM with:
ERROR: modpost: "__aeabi_uldivmod" [fs/nilfs2/nilfs2.ko] undefined!
Fix this by using udiv_u64() for the division.
For finding the index into the group, switch to using a bitwise &
operation since that's more efficient. With this change however,
NILFS_BMAP_GROUP_DIV must be a power of two, so add a compile-time
assertion for that.
Fixes:
|
||
|
|
0b2600f81c |
treewide: change inode->i_ino from unsigned long to u64
On 32-bit architectures, unsigned long is only 32 bits wide, which causes 64-bit inode numbers to be silently truncated. Several filesystems (NFS, XFS, BTRFS, etc.) can generate inode numbers that exceed 32 bits, and this truncation can lead to inode number collisions and other subtle bugs on 32-bit systems. Change the type of inode->i_ino from unsigned long to u64 to ensure that inode numbers are always represented as 64-bit values regardless of architecture. Update all format specifiers treewide from %lu/%lx to %llu/%llx to match the new type, along with corresponding local variable types. This is the bulk treewide conversion. Earlier patches in this series handled trace events separately to allow trace field reordering for better struct packing on 32-bit. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20260304-iino-u64-v3-12-2257ad83d372@kernel.org Acked-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
|
d10a88ce16 |
Merge tag 'nilfs2-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2
Pull nilfs2 updates from Viacheslav Dubeyko: - Fix potential block overflow that cause system hang When executing the FITRIM command, an underflow can occur in the calculation of nblocks. This ultimately leads to the block layer function __blkdev_issue_discard() taking an excessively long time to process the bio chain, and the ns_segctor_sem lock remains held for a long period. This prevents other tasks from acquiring the ns_segctor_sem lock, resulting in a hang reported by syzbot (Edward Adam Davis) - Fix missing struct keywords in nilfs2_api.h kernel-doc (Ryusuke Konishi) - Convert nilfs_super_block to kernel-doc Eliminate 40+ kernel-doc warnings in nilfs2_ondisk.h by converting all of the struct member comments to kernel-doc comments (Randy Dunlap) * tag 'nilfs2-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2: nilfs2: fix missing struct keywords in nilfs2_api.h kernel-doc nilfs2: convert nilfs_super_block to kernel-doc nilfs2: Fix potential block overflow that cause system hang |
||
|
|
f46bb13dc5 |
nilfs2: add setlease file operation
Add the setlease file_operation to nilfs_file_operations and nilfs_dir_operations, pointing to generic_setlease. A future patch will change the default behavior to reject lease attempts with -EINVAL when there is no setlease file operation defined. Add generic_setlease to retain the ability to set leases on this filesystem. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20260108-setlease-6-20-v1-13-ea4dec9b67fa@kernel.org Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
|
ed527ef0c2 |
nilfs2: Fix potential block overflow that cause system hang
When a user executes the FITRIM command, an underflow can occur when
calculating nblocks if end_block is too small. Since nblocks is of
type sector_t, which is u64, a negative nblocks value will become a
very large positive integer. This ultimately leads to the block layer
function __blkdev_issue_discard() taking an excessively long time to
process the bio chain, and the ns_segctor_sem lock remains held for a
long period. This prevents other tasks from acquiring the ns_segctor_sem
lock, resulting in the hang reported by syzbot in [1].
If the ending block is too small, typically if it is smaller than 4KiB
range, depending on the usage of the segment 0, it may be possible to
attempt a discard request beyond the device size causing the hang.
Exiting successfully and assign the discarded size (0 in this case)
to range->len.
Although the start and len values in the user input range are too small,
a conservative strategy is adopted here to safely ignore them, which is
equivalent to a no-op; it will not perform any trimming and will not
throw an error.
[1]
task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000
Call Trace:
rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272
nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline]
nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684
[ryusuke: corrected part of the commit message about the consequences]
Fixes:
|
||
|
|
509d3f4584 |
Merge tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
|
||
|
|
afdf0fb340 |
Merge tag 'vfs-6.19-rc1.fs_header' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fs header updates from Christian Brauner:
"This contains initial work to start splitting up fs.h.
Begin the long-overdue work of splitting up the monolithic fs.h
header. The header has grown to over 3000 lines and includes types and
functions for many different subsystems, making it difficult to
navigate and causing excessive compilation dependencies.
This series introduces new focused headers for superblock-related
code:
- Rename fs_types.h to fs_dirent.h to better reflect its actual
content (directory entry types)
- Add fs/super_types.h containing superblock type definitions
- Add fs/super.h containing superblock function declarations
This is the first step in a longer effort to modularize the VFS
headers.
Cleanups:
- Inode Field Layout Optimization (Mateusz Guzik)
Move inode fields used during fast path lookup closer together to
improve cache locality during path resolution.
- current_umask() Optimization (Mateusz Guzik)
Inline current_umask() and move it to fs_struct.h. This improves
performance by avoiding function call overhead for this
frequently-used function, and places it in a more appropriate
header since it operates on fs_struct"
* tag 'vfs-6.19-rc1.fs_header' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: move inode fields used during fast path lookup closer together
fs: inline current_umask() and move it to fs_struct.h
fs: add fs/super.h header
fs: add fs/super_types.h header
fs: rename fs_types.h to fs_dirent.h
|
||
|
|
9368f0f941 |
Merge tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"Features:
- Hide inode->i_state behind accessors. Open-coded accesses prevent
asserting they are done correctly. One obvious aspect is locking,
but significantly more can be checked. For example it can be
detected when the code is clearing flags which are already missing,
or is setting flags when it is illegal (e.g., I_FREEING when
->i_count > 0)
- Provide accessors for ->i_state, converts all filesystems using
coccinelle and manual conversions (btrfs, ceph, smb, f2fs, gfs2,
overlayfs, nilfs2, xfs), and makes plain ->i_state access fail to
compile
- Rework I_NEW handling to operate without fences, simplifying the
code after the accessor infrastructure is in place
Cleanups:
- Move wait_on_inode() from writeback.h to fs.h
- Spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
for clarity
- Cosmetic fixes to LRU handling
- Push list presence check into inode_io_list_del()
- Touch up predicts in __d_lookup_rcu()
- ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
- Assert on ->i_count in iput_final()
- Assert ->i_lock held in __iget()
Fixes:
- Add missing fences to I_NEW handling"
* tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
dcache: touch up predicts in __d_lookup_rcu()
fs: push list presence check into inode_io_list_del()
fs: cosmetic fixes to lru handling
fs: rework I_NEW handling to operate without fences
fs: make plain ->i_state access fail to compile
xfs: use the new ->i_state accessors
nilfs2: use the new ->i_state accessors
overlayfs: use the new ->i_state accessors
gfs2: use the new ->i_state accessors
f2fs: use the new ->i_state accessors
smb: use the new ->i_state accessors
ceph: use the new ->i_state accessors
btrfs: use the new ->i_state accessors
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Coccinelle-based conversion to use ->i_state accessors
fs: provide accessors for ->i_state
fs: spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
fs: move wait_on_inode() from writeback.h to fs.h
fs: add missing fences to I_NEW handling
ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
...
|
||
|
|
bc947af677 |
Merge branch 'mm-hotfixes-stable' into mm-nonmm-stable in order to be able
to merge "kho: make debugfs interface optional" into mm-nonmm-stable. |
||
|
|
3e4b89e970 |
nilfs2: replace vmalloc + copy_from_user with vmemdup_user
Replace vmalloc() followed by copy_from_user() with vmemdup_user() to improve nilfs_ioctl_clean_segments() and nilfs_ioctl_set_suinfo(). Use kvfree() to free the buffers created by vmemdup_user(). Use u64_to_user_ptr() instead of manually casting the pointers and remove the obsolete 'out_free' label. No functional changes intended. Link: https://lkml.kernel.org/r/20251030154700.7444-1-konishi.ryusuke@gmail.com Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
9a6b60cb14 |
nilfs2: avoid having an active sc_timer before freeing sci
Because kthread_stop did not stop sc_task properly and returned -EINTR,
the sc_timer was not properly closed, ultimately causing the problem [1]
reported by syzbot when freeing sci due to the sc_timer not being closed.
Because the thread sc_task main function nilfs_segctor_thread() returns 0
when it succeeds, when the return value of kthread_stop() is not 0 in
nilfs_segctor_destroy(), we believe that it has not properly closed
sc_timer.
We use timer_shutdown_sync() to sync wait for sc_timer to shutdown, and
set the value of sc_task to NULL under the protection of lock
sc_state_lock, so as to avoid the issue caused by sc_timer not being
properly shutdowned.
[1]
ODEBUG: free active (active state 0) object: 00000000dacb411a object type: timer_list hint: nilfs_construction_timeout
Call trace:
nilfs_segctor_destroy fs/nilfs2/segment.c:2811 [inline]
nilfs_detach_log_writer+0x668/0x8cc fs/nilfs2/segment.c:2877
nilfs_put_super+0x4c/0x12c fs/nilfs2/super.c:509
Link: https://lkml.kernel.org/r/20251029225226.16044-1-konishi.ryusuke@gmail.com
Fixes:
|
||
|
|
5b8ed52866 |
fs: inline current_umask() and move it to fs_struct.h
There is no good reason to have this as a func call, other than avoiding the churn of adding fs_struct.h as needed. Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Link: https://patch.msgid.link/20251104170448.630414-1-mjguzik@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
|
a18d43041b |
nilfs2: use the new ->i_state accessors
Change generated with coccinelle and fixed up by hand as appropriate. Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
|
bc9950b56f |
Merge branch 'mm-hotfixes-stable' into mm-stable in order to pick up
changes required by mm-stable material: hugetlb and damon. |
||
|
|
53fbef56e0 |
mm: introduce memdesc_flags_t
Patch series "Add and use memdesc_flags_t". At some point struct page will be separated from struct slab and struct folio. This is a step towards that by introducing a type for the 'flags' word of all three structures. This gives us a certain amount of type safety by establishing that some of these unsigned longs are different from other unsigned longs in that they contain things like node ID, section number and zone number in the upper bits. That lets us have functions that can be easily called by anyone who has a slab, folio or page (but not easily by anyone else) to get the node or zone. There's going to be some unusual merge problems with this as some odd bits of the kernel decide they want to print out the flags value or something similar by writing page->flags and now they'll need to write page->flags.f instead. That's most of the churn here. Maybe we should be removing these things from the debug output? This patch (of 11): Wrap the unsigned long flags in a typedef. In upcoming patches, this will provide a strong hint that you can't just pass a random unsigned long to functions which take this as an argument. [willy@infradead.org: s/flags/flags.f/ in several architectures] Link: https://lkml.kernel.org/r/aKMgPRLD-WnkPxYm@casper.infradead.org [nicola.vetrini@gmail.com: mips: fix compilation error] Link: https://lore.kernel.org/lkml/CA+G9fYvkpmqGr6wjBNHY=dRp71PLCoi2341JxOudi60yqaeUdg@mail.gmail.com/ Link: https://lkml.kernel.org/r/20250825214245.1838158-1-nicola.vetrini@gmail.com Link: https://lkml.kernel.org/r/20250805172307.1302730-1-willy@infradead.org Link: https://lkml.kernel.org/r/20250805172307.1302730-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Zi Yan <ziy@nvidia.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
025e87f8ea |
nilfs2: fix CFI failure when accessing /sys/fs/nilfs2/features/*
When accessing one of the files under /sys/fs/nilfs2/features when
CONFIG_CFI_CLANG is enabled, there is a CFI violation:
CFI failure at kobj_attr_show+0x59/0x80 (target: nilfs_feature_revision_show+0x0/0x30; expected type: 0xfc392c4d)
...
Call Trace:
<TASK>
sysfs_kf_seq_show+0x2a6/0x390
? __cfi_kobj_attr_show+0x10/0x10
kernfs_seq_show+0x104/0x15b
seq_read_iter+0x580/0xe2b
...
When the kobject of the kset for /sys/fs/nilfs2 is initialized, its ktype
is set to kset_ktype, which has a ->sysfs_ops of kobj_sysfs_ops. When
nilfs_feature_attr_group is added to that kobject via
sysfs_create_group(), the kernfs_ops of each files is sysfs_file_kfops_rw,
which will call sysfs_kf_seq_show() when ->seq_show() is called.
sysfs_kf_seq_show() in turn calls kobj_attr_show() through
->sysfs_ops->show(). kobj_attr_show() casts the provided attribute out to
a 'struct kobj_attribute' via container_of() and calls ->show(), resulting
in the CFI violation since neither nilfs_feature_revision_show() nor
nilfs_feature_README_show() match the prototype of ->show() in 'struct
kobj_attribute'.
Resolve the CFI violation by adjusting the second parameter in
nilfs_feature_{revision,README}_show() from 'struct attribute' to 'struct
kobj_attribute' to match the expected prototype.
Link: https://lkml.kernel.org/r/20250906144410.22511-1-konishi.ryusuke@gmail.com
Fixes:
|
||
|
|
57fcb7d930 |
Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fileattr updates from Christian Brauner: "This introduces the new file_getattr() and file_setattr() system calls after lengthy discussions. Both system calls serve as successors and extensible companions to the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have started to show their age in addition to being named in a way that makes it easy to conflate them with extended attribute related operations. These syscalls allow userspace to set filesystem inode attributes on special files. One of the usage examples is the XFS quota projects. XFS has project quotas which could be attached to a directory. All new inodes in these directories inherit project ID set on parent directory. The project is created from userspace by opening and calling FS_IOC_FSSETXATTR on each inode. This is not possible for special files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left with empty project ID. Those inodes then are not shown in the quota accounting but still exist in the directory. This is not critical but in the case when special files are created in the directory with already existing project quota, these new inodes inherit extended attributes. This creates a mix of special files with and without attributes. Moreover, special files with attributes don't have a possibility to become clear or change the attributes. This, in turn, prevents userspace from re-creating quota project on these existing files. In addition, these new system calls allow the implementation of additional attributes that we couldn't or didn't want to fit into the legacy ioctls anymore" * tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: tighten a sanity check in file_attr_to_fileattr() tree-wide: s/struct fileattr/struct file_kattr/g fs: introduce file_getattr and file_setattr syscalls fs: prepare for extending file_get/setattr() fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP selinux: implement inode_file_[g|s]etattr hooks lsm: introduce new hooks for setting/getting inode fsxattr fs: split fileattr related helpers into separate file |
||
|
|
7031769e10 |
Merge tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mmap_prepare updates from Christian Brauner: "Last cycle we introduce f_op->mmap_prepare() in |