47 Commits
Author SHA1 Message Date
Jan KaraandChristian Brauner caaa184b42 minix: Track metadata bhs in fs-private inode part
Track metadata bhs for an inode in fs-private part of the inode.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-81-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-03-26 15:03:32 +01:00
Jan KaraandChristian Brauner f3873f90b4 minix: Switch to generic_buffers_fsync()
Minix uses list of metadata bhs attached to an inode. Switch it to
generic_buffers_fsync() instead of generic_file_fsync() as we'll be
removing metadata bh handling from generic_file_fsync().

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-52-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-03-26 15:03:28 +01:00
Matthew Wilcox (Oracle)andChristian Brauner b39f7d75dc fs: Remove three arguments from block_write_end()
block_write_end() looks like it can be used as a ->write_end()
implementation.  However, it can't as it does not unlock nor put
the folio.  Since it does not use the 'file', 'mapping' nor 'fsdata'
arguments, remove them.

Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/20250624132130.1590285-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-06-24 15:53:40 +02:00
Matthew Wilcox (Oracle)andChristian Brauner 97edbc02b2 buffer: Convert block_write_end() to take a folio
All callers now have a folio, so pass it in instead of converting
from a folio to a page and back to a folio again.  Saves a call
to compound_head().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-08-07 11:31:59 +02:00
Matthew Wilcox (Oracle)andChristian Brauner 0551bc716e minixfs: Convert dir_commit_chunk() to take a folio
All callers now have a folio, so pass it in.  Saves a call to
compound_head().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-08-07 11:31:57 +02:00
Matthew Wilcox (Oracle)andChristian Brauner cf04e47128 minixfs: Convert minix_prepare_chunk() to take a folio
All callers now have a folio, so convert minix_prepare_chunk() to
take one.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-08-07 11:31:57 +02:00
Matthew Wilcox (Oracle)andChristian Brauner da2c04c150 minixfs: Convert minix_make_empty() to use a folio
Removes a few hidden calls to compound_head().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-08-07 11:31:57 +02:00
Matthew Wilcox (Oracle)andChristian Brauner e033fe609d minixfs: Convert minix_delete_entry() to work on a folio
Match ext2 and remove a few hidden calls to compound_head().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-08-07 11:31:57 +02:00
Matthew Wilcox (Oracle)andChristian Brauner 6e9ead1ec9 minixfs: Convert minix_set_link() and minix_dotdot() to take a folio
This matches ext2 and removes a few hidden calls to compound_head().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-08-07 11:31:56 +02:00
Matthew Wilcox (Oracle)andChristian Brauner 5a77670ff8 minixfs: Convert minix_find_entry() to take a folio
Remove a few hidden calls to compound_head().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-08-07 11:31:56 +02:00
Matthew Wilcox (Oracle)andChristian Brauner 9cf2de3dda minixfs: Convert dir_get_page() to dir_get_folio()
Remove a few conversions between page and folio.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-08-07 11:31:56 +02:00
Al Viro 41e9a7faff minixfs: switch to kmap_local_page()
Again, a counterpart of Fabio's fs/sysv patch

Reviewed-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-18 21:07:29 -05:00
Al Viro 6628f69ee6 minixfs: Use dir_put_page() in minix_unlink() and minix_rename()
... rather than open-coding it there.  Counterpart of the
corresponding fs/sysv commit from Fabio's series...

Reviewed-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-18 21:07:29 -05:00
Al Viro ee0d27c907 minixfs: change the signature of dir_get_page()
Change the signature of dir_get_page() in order to prepare this function
to the conversion to the use of kmap_local_page(). Change also those call
sites which are required to adjust to the new signature.

Essentially a copy of the corresponding fs/sysv commit by
Fabio M. De Francesco <fmdefrancesco@gmail.com>

Reviewed-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-18 21:07:29 -05:00
Al Viro 4812509e91 minixfs: use offset_in_page()
It's cheaper and more idiomatic than subtracting page_address()
of the corresponding page...

Reviewed-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-18 21:07:11 -05:00
Jeff LaytonandChristian Brauner 06475f4b13 minix: convert to new timestamp accessors
Convert to using the new inode timestamp accessor functions.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-48-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18 14:08:23 +02:00
Jeff LaytonandChristian Brauner f7f438589f kernfs: convert to ctime accessor functions
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-54-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-07-24 10:30:01 +02:00
Christoph HellwigandAl Viro f556e776b1 minix: don't flush page immediately for DIRSYNC directories
We do not need to writeout modified directory blocks immediately when
modifying them while the page is locked. It is enough to do the flush
somewhat later which has the added benefit that inode times can be
flushed as well. It also allows us to stop depending on
write_one_page() function.

Ported from an ext2 patch by Jan Kara.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-19 19:26:42 -05:00
Christoph HellwigandAl Viro 2d1a9d599b minix: fix error handling in minix_set_link
If minix_prepare_chunk fails, updating c/mtime and marking the
dir inode dirty is wrong, as the inode hasn't been modified.  Also
propagate the error to the caller.

Note that this moves the dir_put_page call later, but that matches
other uses of this helper in the directory code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-19 19:26:34 -05:00
Christoph HellwigandAl Viro b61d15d5ff minix: fix error handling in minix_delete_entry
If minix_prepare_chunk fails, updating c/mtime and marking the
dir inode dirty is wrong, as the inode hasn't been modified.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-19 19:26:29 -05:00
Christoph HellwigandAl Viro 35bb6a092c minix: move releasing pages into unlink and rename
Instead of consuming the page reference and kmap in the low-level
minix_delete_entry and minix_set_link helpers, do it in the callers
where that code can be shared with the error cleanup path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-19 19:26:24 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Jeff Layton 2b69c8280c mm: drop "wait" parameter from write_one_page()
The callers all set it to 1.

Also, make it clear that this function will not set any sort of AS_*
error, and that the caller must do so if necessary.  No existing caller
uses this on normal files, so none of them need it.

Also, add __must_check here since, in general, the callers need to handle
an error here in some fashion.

Link: http://lkml.kernel.org/r/20170525103303.6524-1-jlayton@redhat.com
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2017-07-05 18:44:22 -04:00
Deepa DinamaniandAl Viro 02027d42c3 fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
CURRENT_TIME_SEC is not y2038 safe. current_time() will
be transitioned to use 64 bit time along with vfs in a
separate patch.
There is no plan to transistion CURRENT_TIME_SEC to use
y2038 safe time interfaces.

current_time() will also be extended to use superblock
range checking parameters when range checking is introduced.

This works because alloc_super() fills in the the s_time_gran
in super block to NSEC_PER_SEC.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:06:22 -04:00
Al Viro 3b0a3c1ac1 simple local filesystems: switch to ->iterate_shared()
no changes needed (XFS isn't simple, but it has the same parallelism
in the interesting parts exercised from CXFS).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-02 19:49:32 -04:00