fuse_iomap_writeback_range() appends one folio pointer and one
fuse_folio_desc for every dirty range that is merged into the current
writeback request. The merge decision checks the byte budget against
fc->max_pages and fc->max_write, but it does not check whether the folio
and descriptor arrays still have another free slot.
This is not sufficient for fuseblk, where the filesystem block size can
be smaller than PAGE_SIZE. With writeback cache enabled and max_pages
negotiated as one, contiguous sub-page dirty ranges can fit within the
byte budget while spanning more than one folio. The next append can then
write past the one-slot folios and descs arrays.
Split the request when the number of already attached folios has reached
fc->max_pages. This keeps the folio/descriptor slot accounting in sync
with the send decision.
Fixes: ef7e7cbb32 ("fuse: use iomap for writeback")
Cc: stable@vger.kernel.org
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Link: https://patch.msgid.link/20260506122415.205340-1-qjx1298677004@gmail.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull fuse update from Miklos Szeredi:
- Fix possible hang in virtiofs when cleaning up a DAX inode (Sergio
Lopez)
- Fix a warning when using large folio as the source of SPLICE_F_MOVE
on the fuse device (Bernd)
- Fix uninitialized value found by KMSAN (Luis Henriques)
- Fix synchronous INIT hang (Miklos)
- Fix race between inode initialization and FUSE_NOTIFY_INVAL_INODE
(Horst)
- Allow fd to be closed after passing fuse device fd to
fsconfig(..., "fd", ...) (Miklos)
- Support FSCONFIG_SET_FD for "fd" option (Miklos)
- Misc fixes and cleanups
* tag 'fuse-update-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (21 commits)
fuse: support FSCONFIG_SET_FD for "fd" option
fuse: clean up device cloning
fuse: don't require /dev/fuse fd to be kept open during mount
fuse: add refcount to fuse_dev
fuse: create fuse_dev on /dev/fuse open instead of mount
fuse: check connection state on notification
fuse: fuse_dev_ioctl_clone() should wait for device file to be initialized
fuse: fix inode initialization race
fuse: abort on fatal signal during sync init
fuse: fix uninit-value in fuse_dentry_revalidate()
fuse: use offset_in_page() for page offset calculations
fuse: use DIV_ROUND_UP() for page count calculations
fuse: simplify logic in fuse_notify_store() and fuse_retrieve()
fuse: validate outarg offset and size in notify store/retrieve
fuse: Check for large folio with SPLICE_F_MOVE
fuse: quiet down complaints in fuse_conn_limit_write
fuse: drop unnecessary argument from fuse_lookup_init()
fuse: fix premature writetrhough request for large folio
fuse: refactor duplicate queue teardown operation
virtiofs: add FUSE protocol validation
...
Pull vfs integrity updates from Christian Brauner:
"This adds support to generate and verify integrity information (aka
T10 PI) in the file system, instead of the automatic below the covers
support that is currently used.
The implementation is based on refactoring the existing block layer PI
code to be reusable for this use case, and then adding relatively
small wrappers for the file system use case. These are then used in
iomap to implement the semantics, and wired up in XFS with a small
amount of glue code.
Compared to the baseline this does not change performance for writes,
but increases read performance up to 15% for 4k I/O, with the benefit
decreasing with larger I/O sizes as even the baseline maxes out the
device quickly on my older enterprise SSD"
* tag 'vfs-7.1-rc1.integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: support T10 protection information
iomap: support T10 protection information
iomap: support ioends for buffered reads
iomap: add a bioset pointer to iomap_read_folio_ops
ntfs3: remove copy and pasted iomap code
iomap: allow file systems to hook into buffered read bio submission
iomap: only call into ->submit_read when there is a read_ctx
iomap: pass the iomap_iter to ->submit_read
iomap: refactor iomap_bio_read_folio_range
block: pass a maxlen argument to bio_iov_iter_bounce
block: add fs_bio_integrity helpers
block: make max_integrity_io_size public
block: prepare generation / verification helpers for fs usage
block: add a bdev_has_integrity_csum helper
block: factor out a bio_integrity_setup_default helper
block: factor out a bio_integrity_action helper
Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot
guarantee data persistence on sync (eg fuse). For superblocks with this
flag set, sync kicks off writeback of dirty inodes but does not wait
for the flusher threads to complete the writeback.
This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in
commit f9a49aa302 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings
in wait_sb_inodes()"). The flag belongs at the superblock level because
data integrity is a filesystem-wide property, not a per-inode one.
Having this flag at the superblock level also allows us to skip having
to iterate every dirty inode in wait_sb_inodes() only to skip each inode
individually.
Prior to this commit, mappings with no data integrity guarantees skipped
waiting on writeback completion but still waited on the flusher threads
to finish initiating the writeback. Waiting on the flusher threads is
unnecessary. This commit kicks off writeback but does not wait on the
flusher threads. This change properly addresses a recent report [1] for
a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting
on the flusher threads to finish:
Workqueue: pm_fs_sync pm_fs_sync_work_fn
Call Trace:
<TASK>
__schedule+0x457/0x1720
schedule+0x27/0xd0
wb_wait_for_completion+0x97/0xe0
sync_inodes_sb+0xf8/0x2e0
__iterate_supers+0xdc/0x160
ksys_sync+0x43/0xb0
pm_fs_sync_work_fn+0x17/0xa0
process_one_work+0x193/0x350
worker_thread+0x1a1/0x310
kthread+0xfc/0x240
ret_from_fork+0x243/0x280
ret_from_fork_asm+0x1a/0x30
</TASK>
On fuse this is problematic because there are paths that may cause the
flusher thread to block (eg if systemd freezes the user session cgroups
first, which freezes the fuse daemon, before invoking the kernel
suspend. The kernel suspend triggers ->write_node() which on fuse issues
a synchronous setattr request, which cannot be processed since the
daemon is frozen. Or if the daemon is buggy and cannot properly complete
writeback, initiating writeback on a dirty folio already under writeback
leads to writeback_get_folio() -> folio_prepare_writeback() ->
unconditional wait on writeback to finish, which will cause a hang).
This commit restores fuse to its prior behavior before tmp folios were
removed, where sync was essentially a no-op.
[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1
Fixes: 0c58a97f91 ("fuse: remove tmp folio for writebacks and internal rb tree")
Reported-by: John <therealgraysky@proton.me>
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260320005145.2483161-2-joannelkoong@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When large folio is enabled and the initial folio offset exceeds
PAGE_SIZE, e.g. the position resides in the second page of a large
folio, after the folio copying the offset (in the page) won't be updated
to 0 even though the expected range is successfully copied until the end
of the folio. In this case fuse_fill_write_pages() exits prematurelly
before the request has reached the max_write/max_pages limit.
Fix this by eliminating page offset entirely and use folio offset
instead.
Fixes: d60a6015e1 ("fuse: support large folios for writethrough writes")
Reviewed-by: Horst Birthelmer <hbirthelmer@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 26e5c67deb ("fuse: fix livelock in synchronous file put from
fuseblk workers") made fputs on closing files always asynchronous.
As cleaning up DAX inodes may require issuing a number of synchronous
request for releasing the mappings, completing the release request from
the worker thread may lead to it hanging like this:
[ 21.386751] Workqueue: events virtio_fs_requests_done_work
[ 21.386769] Call trace:
[ 21.386770] __switch_to+0xe4/0x140
[ 21.386780] __schedule+0x294/0x72c
[ 21.386787] schedule+0x24/0x90
[ 21.386794] request_wait_answer+0x184/0x298
[ 21.386799] __fuse_simple_request+0x1f4/0x320
[ 21.386805] fuse_send_removemapping+0x80/0xa0
[ 21.386810] dmap_removemapping_list+0xac/0xfc
[ 21.386814] inode_reclaim_dmap_range.constprop.0+0xd0/0x204
[ 21.386820] fuse_dax_inode_cleanup+0x28/0x5c
[ 21.386825] fuse_evict_inode+0x120/0x190
[ 21.386834] evict+0x188/0x320
[ 21.386847] iput_final+0xb0/0x20c
[ 21.386854] iput+0xa0/0xbc
[ 21.386862] fuse_release_end+0x18/0x2c
[ 21.386868] fuse_request_end+0x9c/0x2c0
[ 21.386872] virtio_fs_request_complete+0x150/0x384
[ 21.386879] virtio_fs_requests_done_work+0x18c/0x37c
[ 21.386885] process_one_work+0x15c/0x2e8
[ 21.386891] worker_thread+0x278/0x480
[ 21.386898] kthread+0xd0/0xdc
[ 21.386902] ret_from_fork+0x10/0x20
Here, the virtio-fs worker_thread is waiting on request_wait_answer()
for a reply from the virtio-fs server that is already in the virtqueue
but will never be processed since it's that same worker thread the one
in charge of consuming the elements from the virtqueue.
To address this issue, when relesing a DAX inode mark the operation as
potentially blocking. Doing this will ensure these release requests are
processed on a different worker thread.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The 'max()' value of a 'long long' and an 'unsigned int' is problematic
if the former is negative:
In function 'fuse_wr_pages',
inlined from 'fuse_perform_write' at fs/fuse/file.c:1347:27:
include/linux/compiler_types.h:652:45: error: call to '__compiletime_assert_390' declared with attribute error: min(((pos + len - 1) >> 12) - (pos >> 12) + 1, max_pages) signedness error
652 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
Use a temporary variable to make it clearer what is going on here.
Fixes: 0f5bb0cfb0 ("fs: use min() or umin() instead of min_t()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc vfs updates from Christian Brauner:
"This contains a mix of VFS cleanups, performance improvements, API
fixes, documentation, and a deprecation notice.
Scalability and performance:
- Rework pid allocation to only take pidmap_lock once instead of
twice during alloc_pid(), improving thread creation/teardown
throughput by 10-16% depending on false-sharing luck. Pad the
namespace refcount to reduce false-sharing
- Track file lock presence via a flag in ->i_opflags instead of
reading ->i_flctx, avoiding false-sharing with ->i_readcount on
open/close hot paths. Measured 4-16% improvement on 24-core
open-in-a-loop benchmarks
- Use a consume fence in locks_inode_context() to match the
store-release/load-consume idiom, eliminating a hardware fence on
some architectures
- Annotate cdev_lock with __cacheline_aligned_in_smp to prevent
false-sharing
- Remove a redundant DCACHE_MANAGED_DENTRY check in
__follow_mount_rcu() that never fires since the caller already
verifies it, eliminating a 100% mispredicted branch
- Fix a 100% mispredicted likely() in devcgroup_inode_permission()
that became wrong after a prior code reorder
Bug fixes and correctness:
- Make insert_inode_locked() wait for inode destruction instead of
skipping, fixing a corner case where two matching inodes could
exist in the hash
- Move f_mode initialization before file_ref_init() in alloc_file()
to respect the SLAB_TYPESAFE_BY_RCU ordering contract
- Add a WARN_ON_ONCE guard in try_to_free_buffers() for folios with
no buffers attached, preventing a null pointer dereference when
AS_RELEASE_ALWAYS is set but no release_folio op exists
- Fix select restart_block to store end_time as timespec64, avoiding
truncation of tv_sec on 32-bit architectures
- Make dump_inode() use get_kernel_nofault() to safely access inode
and superblock fields, matching the dump_mapping() pattern
API modernization:
- Make posix_acl_to_xattr() allocate the buffer internally since
every single caller was doing it anyway. Reduces boilerplate and
unnecessary error checking across ~15 filesystems
- Replace deprecated simple_strtoul() with kstrtoul() for the
ihash_entries, dhash_entries, mhash_entries, and mphash_entries
boot parameters, adding proper error handling
- Convert chardev code to use guard(mutex) and __free(kfree) cleanup
patterns
- Replace min_t() with min() or umin() in VFS code to avoid silently
truncating unsigned long to unsigned int
- Gate LOOKUP_RCU assertions behind CONFIG_DEBUG_VFS since callers
already check the flag
Deprecation:
- Begin deprecating legacy BSD process accounting (acct(2)). The
interface has numerous footguns and better alternatives exist
(eBPF)
Documentation:
- Fix and complete kernel-doc for struct export_operations, removing
duplicated documentation between ReST and source
- Fix kernel-doc warnings for __start_dirop() and ilookup5_nowait()
Testing:
- Add a kunit test for initramfs cpio handling of entries with
filesize > PATH_MAX
Misc:
- Add missing <linux/init_task.h> include in fs_struct.c"
* tag 'vfs-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
posix_acl: make posix_acl_to_xattr() alloc the buffer
fs: make insert_inode_locked() wait for inode destruction
initramfs_test: kunit test for cpio.filesize > PATH_MAX
fs: improve dump_inode() to safely access inode fields
fs: add <linux/init_task.h> for 'init_fs'
docs: exportfs: Use source code struct documentation
fs: move initializing f_mode before file_ref_init()
exportfs: Complete kernel-doc for struct export_operations
exportfs: Mark struct export_operations functions at kernel-doc
exportfs: Fix kernel-doc output for get_name()
acct(2): begin the deprecation of legacy BSD process accounting
device_cgroup: remove branch hint after code refactor
VFS: fix __start_dirop() kernel-doc warnings
fs: Describe @isnew parameter in ilookup5_nowait()
fs/namei: Remove redundant DCACHE_MANAGED_DENTRY check in __follow_mount_rcu
fs: only assert on LOOKUP_RCU when built with CONFIG_DEBUG_VFS
select: store end_time as timespec64 in restart block
chardev: Switch to guard(mutex) and __free(kfree)
namespace: Replace simple_strtoul with kstrtoul to parse boot params
dcache: Replace simple_strtoul with kstrtoul in set_dhash_entries
...
Pull vfs iomap updates from Christian Brauner:
- Erofs page cache sharing preliminaries:
Plumb a void *private parameter through iomap_read_folio() and
iomap_readahead() into iomap_iter->private, matching iomap DIO. Erofs
uses this to replace a bogus kmap_to_page() call, as preparatory work
for page cache sharing.
- Fix for invalid folio access:
Fix an invalid folio access when a folio without iomap_folio_state
is fully submitted to the IO helper — the helper may call
folio_end_read() at any time, so ctx->cur_folio must be invalidated
after full submission.
* tag 'vfs-7.0-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: fix invalid folio access after folio_end_read()
erofs: hold read context in iomap_iter if needed
iomap: stash iomap read ctx in the private field of iomap_iter
Pull vfs lease updates from Christian Brauner:
"This contains updates for lease support to require filesystems to
explicitly opt-in to lease support
Currently kernel_setlease() falls through to generic_setlease() when a
a filesystem does not define ->setlease(), silently granting lease
support to every filesystem regardless of whether it is prepared for
it.
This is a poor default: most filesystems never intended to support
leases, and the silent fallthrough makes it impossible to distinguish
"supports leases" from "never thought about it".
This inverts the default. It adds explicit
.setlease = generic_setlease;
assignments to every in-tree filesystem that should retain lease
support, then changes kernel_setlease() to return -EINVAL when
->setlease is NULL.
With the new default in place, simple_nosetlease() is redundant and
is removed along with all references to it"
* tag 'vfs-7.0-rc1.leases' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
fuse: add setlease file operation
fs: remove simple_nosetlease()
filelock: default to returning -EINVAL when ->setlease operation is NULL
xfs: add setlease file operation
ufs: add setlease file operation
udf: add setlease file operation
tmpfs: add setlease file operation
squashfs: add setlease file operation
overlayfs: add setlease file operation
orangefs: add setlease file operation
ocfs2: add setlease file operation
ntfs3: add setlease file operation
nilfs2: add setlease file operation
jfs: add setlease file operation
jffs2: add setlease file operation
gfs2: add a setlease file operation
fat: add setlease file operation
f2fs: add setlease file operation
exfat: add setlease file operation
ext4: add setlease file operation
...
It's useful to get filesystem-specific information using the
existing private field in the @iomap_iter passed to iomap_{begin,end}
for advanced usage for iomap buffered reads, which is much like the
current iomap DIO.
For example, EROFS needs it to:
- implement an efficient page cache sharing feature, since iomap
needs to apply to anon inode page cache but we'd like to get the
backing inode/fs instead, so filesystem-specific private data is
needed to keep such information;
- pass in both struct page * and void * for inline data to avoid
kmap_to_page() usage (which is bogus).
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20260109102856.598531-2-lihongbo22@huawei.com
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add the setlease file_operation to fuse_file_operations, pointing to
generic_setlease. A future patch will change the default behavior to
reject lease attempts with -EINVAL when there is no setlease file
operation defined. Add generic_setlease to retain the ability to set
leases on this filesystem.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260112130121.25965-1-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
min_t(unsigned int, a, b) casts an 'unsigned long' to 'unsigned int'.
Use min(a, b) instead as it promotes any 'unsigned int' to 'unsigned long'
and so cannot discard significant bits.
A couple of places need umin() because of loops like:
nfolios = DIV_ROUND_UP(ret + start, PAGE_SIZE);
for (i = 0; i < nfolios; i++) {
struct folio *folio = page_folio(pages[i]);
...
unsigned int len = umin(ret, PAGE_SIZE - start);
...
ret -= len;
...
}
where the compiler doesn't track things well enough to know that
'ret' is never negative.
The alternate loop:
for (i = 0; ret > 0; i++) {
struct folio *folio = page_folio(pages[i]);
...
unsigned int len = min(ret, PAGE_SIZE - start);
...
ret -= len;
...
}
would be equivalent and doesn't need 'nfolios'.
Most of the 'unsigned long' actually come from PAGE_SIZE.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20251119224140.8616-31-david.laight.linux@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull fuse updates from Miklos Szeredi:
- Add mechanism for cleaning out unused, stale dentries; controlled via
a module option (Luis Henriques)
- Fix various bugs
- Cleanups
* tag 'fuse-update-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Uninitialized variable in fuse_epoch_work()
fuse: fix io-uring list corruption for terminated non-committed requests
fuse: signal that a fuse inode should exhibit local fs behaviors
fuse: Always flush the page cache before FOPEN_DIRECT_IO write
fuse: Invalidate the page cache after FOPEN_DIRECT_IO write
fuse: rename 'namelen' to 'namesize'
fuse: use strscpy instead of strcpy
fuse: refactor fuse_conn_put() to remove negative logic.
fuse: new work queue to invalidate dentries from old epochs
fuse: new work queue to periodically invalidate expired dentries
dcache: export shrink_dentry_list() and add new helper d_dispose_if_unused()
fuse: add WARN_ON and comment for RCU revalidate
fuse: Fix whitespace for fuse_uring_args_to_ring() comment
fuse: missing copy_finish in fuse-over-io-uring argument copies
fuse: fix readahead reclaim deadlock
This was done as condition on direct_io_allow_mmap, but I believe
this is not right, as a file might be open two times - once with
write-back enabled another time with FOPEN_DIRECT_IO.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
generic_file_direct_write() also does this and has a large
comment about.
Reproducer here is xfstest's generic/209, which is exactly to
have competing DIO write and cached IO read.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of requiring that the caller calls iomap_finish_folio_read()
even if the ->read_folio_range() callback returns an error, account for
this internally in iomap instead, which makes the interface simpler and
makes it match writeback's ->read_folio_range() error handling
expectations.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-6-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pending writebacks must be accounted for to determine when all requests
have completed and writeback on the folio should be ended. Currently
this is done by atomically incrementing ifs->write_bytes_pending for
every range to be written back.
Instead, the number of atomic operations can be minimized by setting
ifs->write_bytes_pending to the folio size, internally tracking how many
bytes are written back asynchronously, and then after sending off all
the requests, decrementing ifs->write_bytes_pending by the number of
bytes not written back asynchronously. Now, for N ranges written back,
only N + 2 atomic operations are required instead of 2N + 2.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-5-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit e26ee4efbc ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:
>>> stack_trace(1504735)
folio_wait_bit_common (mm/filemap.c:1308:4)
folio_lock (./include/linux/pagemap.h:1052:3)
truncate_inode_pages_range (mm/truncate.c:336:10)
fuse_evict_inode (fs/fuse/inode.c:161:2)
evict (fs/inode.c:704:3)
dentry_unlink_inode (fs/dcache.c:412:3)
__dentry_kill (fs/dcache.c:615:3)
shrink_kill (fs/dcache.c:1060:12)
shrink_dentry_list (fs/dcache.c:1087:3)
prune_dcache_sb (fs/dcache.c:1168:2)
super_cache_scan (fs/super.c:221:10)
do_shrink_slab (mm/shrinker.c:435:9)
shrink_slab (mm/shrinker.c:626:10)
shrink_node (mm/vmscan.c:5951:2)
shrink_zones (mm/vmscan.c:6195:3)
do_try_to_free_pages (mm/vmscan.c:6257:3)
do_swap_page (mm/memory.c:4136:11)
handle_pte_fault (mm/memory.c:5562:10)
handle_mm_fault (mm/memory.c:5870:9)
do_user_addr_fault (arch/x86/mm/fault.c:1338:10)
handle_page_fault (arch/x86/mm/fault.c:1481:3)
exc_page_fault (arch/x86/mm/fault.c:1539:2)
asm_exc_page_fault+0x22/0x27
Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()).
Fixes: e26ee4efbc ("fuse: allocate ff->release_args only if release is needed")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reported-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Do readahead in fuse using iomap. This gives us granular uptodate
tracking for large folios, which optimizes how much data needs to be
read in. If some portions of the folio are already uptodate (eg through
a prior write), we only need to read in the non-uptodate portions.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
