no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The old terminology of "toss" and "keep" is no longer an
accurate description of the rsb states and lists, so change
the names to "inactive" and "active". The old names had
also been copied into the scanning code, which is changed
back to use the "scan" name.
- "active" rsb structs have lkb's attached, and are ref counted.
- "inactive" rsb structs have no lkb's attached, are not ref counted.
- "scan" list is for rsb's that can be freed after a timeout period.
- "slow" lists are for infrequent iterations through active or
inactive rsb structs.
- inactive rsb structs that are directory records will not be put
on the scan list, since they are not freed based on timeouts.
- inactive rsb structs that are not directory records will be
put on the scan list to be freed, since they are not longer needed.
Signed-off-by: David Teigland <teigland@redhat.com>
The conversion to rhashtable introduced a hash table lock per lockspace,
in place of per bucket locks. To make this more scalable, switch to
using a rwlock for hash table access. The common case fast path uses
it as a read lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
To prepare for using rhashtable, add two rsb lists for iterating
through rsb's in two uncommon cases where this is necesssary:
- when dumping rsb state from debugfs, now using seq_list.
- when looking at all rsb's during recovery.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are several places where lock processing can perform two hash table
lookups, first in the "keep" list, and if not found, in the "toss" list.
This patch introduces a new rsb state flag "RSB_TOSS" to represent the
difference between the state of being on keep vs toss list, so that the
two lists can be combined. This avoids cases of two lookups.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Prepare to replace our own hash table with rhashtable by replacing
the per-bucket locks in our own hash table with a single lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use spin_lock_bh for all spinlocks involved in message processing,
in preparation for softirq message processing. DLM lock requests
from user space involve dlm processing in user context, in addition
to the standard kernel context, necessitating bh variants.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Convert the waiters mutex to a spinlock in prepration for
processing messages in softirq context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The waiters_mutex no longer needs to be used in the waiters recovery
functions dlm_recover_waiters_pre() and dlm_recover_waiters_pre().
During recovery, ordinary locking operations are paused, and the
recovery thread is the only context accessing the waiters list,
so the lock is not needed.
Access to the waiters list from debugfs functions is avoided by
taking the top level recovery lock in the debugfs dump function.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Get rid of the unnecessary refcounting on callback structs.
Copy interesting callback info into the lkb struct rather
than maintaining pointers to callback structs from the lkb.
This goes back to the way things were done prior to
commit 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove the ability to dump pending lkb callbacks from debugfs.
The prepares for separating lkb structs from callbacks.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Over the time the dlm debugfs format string has been changed but the
header wasn't updated. This patch changes the first line dump header and
their meaning to reflect the current formats.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes to set the type 4 format ops in case of table_open4().
It got accidentially changed by commit 541adb0d4d ("fs: dlm: debugfs
for queued callbacks") and since them toss debug dumps the same format
as format 5 that are the queued ast callbacks for lkbs.
Fixes: 541adb0d4d ("fs: dlm: debugfs for queued callbacks")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is no need to clear the buffer used to build the file name.
snprintf() already guarantees that it is NULL terminated and such a
(useless) precaution was not done for the first string (i.e
ls_debug_rsb_dentry)
So, save a few LoC.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
8 is not the maximum size of the suffix used when creating debugfs files.
Let the compiler compute the correct size, and only give a hint about the
longest possible string that is used.
When building with W=1, this fixes the following warnings:
fs/dlm/debug_fs.c: In function ‘dlm_create_debug_file’:
fs/dlm/debug_fs.c:1020:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
1020 | snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_waiters", ls->ls_name);
| ^
fs/dlm/debug_fs.c:1020:9: note: ‘snprintf’ output between 9 and 73 bytes into a destination of size 72
1020 | snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_waiters", ls->ls_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/dlm/debug_fs.c:1031:50: error: ‘_queued_asts’ directive output may be truncated writing 12 bytes into a region of size between 8 and 72 [-Werror=format-truncation=]
1031 | snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_queued_asts", ls->ls_name);
| ^~~~~~~~~~~~
fs/dlm/debug_fs.c:1031:9: note: ‘snprintf’ output between 13 and 77 bytes into a destination of size 72
1031 | snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_queued_asts", ls->ls_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 541adb0d4d ("fs: dlm: debugfs for queued callbacks")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use sizeof(name) instead of the equivalent, but hard coded,
DLM_LOCKSPACE_LEN + 8.
This is less verbose and more future proof.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
It was useful to debug an issue with the callback queue to check if any
callbacks in any lkb are for some reason not processed by the callback
workqueue. The mentioned issue was fixed by commit a034c1370d ("fs:
dlm: fix DLM_IFL_CB_PENDING gets overwritten"). If there are similar
issue that looks like a ast callback was not processed, we can confirm
now that it is not sitting to be processed by the callback workqueue
anymore.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will move the lkb_flags value to the recently introduced
lkb_iflags value. For lkb_iflags we use atomic bit operations because
some flags like DLM_IFL_CB_PENDING are used while non rsb lock is held
to avoid issues with other flag manipulations which might run at the
same time we switch to atomic bit operations. Snapshot the bit values to
an uint32_t value is only used for debugging/logging use cases and don't
need to be 100% correct.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently manipulating lkb_dflags assumes to held the rsb lock assigned
to the lkb. This is held by dlm message processing after certain
time to lookup the right rsb from the received lkb message id. For user
space locks flags, which is currently the only use case for lkb_dflags,
flags are also being set during dlm character device handling without
holding the rsb lock. To minimize the risk that bit operations are
getting corrupted we switch to atomic bit operations. This patch will
also introduce helpers to snapshot atomic bit values in an non atomic
way. There might be still issues with the flag handling e.g. running in
case of manipulating bit ops and snapshot them at the same time, but this
patch minimize them and will start to use atomic bit operations.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch stores lkb distributed flags value in an separate value
instead of sharing internal and distributed flags in lkb->lkb_flags value.
This has the advantage to not mask/write back flag values in
receive_flags() functionality. The dlm debug_fs does not provide the
distributed flags anymore, those can be added in future.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will introducde a queue implementation for callbacks by using
the Linux lists. The current callback queue handling is implemented by a
static limit of 6 entries, see DLM_CALLBACKS_SIZE. The sequence number
inside the callback structure was used to see if the entries inside the
static entry is valid or not. We don't need any sequence numbers anymore
with a dynamic datastructure with grows and shrinks during runtime to
offer such functionality.
We assume that every callback will be delivered to the DLM user if once
queued. Therefore the callback flag DLM_CB_SKIP was dropped and the
check for skipping bast was moved before worker handling and not skip
while the callback worker executes. This will reduce unnecessary queues
of the callback worker.
All last callback saves are pointers now and don't need to copied over.
There is a reference counter for callback structures which will care
about to free the callback structures at the right time if they are not
referenced anymore.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes an potential overflow in sscanf and the maximum
declared string parsing length which seems to be excluding the null
termination symbol. This patch will just add one byte to be prepared on
a string with length of DLM_RESNAME_MAXLEN including the null
termination symbol.
Fixes: 5054e79de9 ("fs: dlm: add lkb debugfs functionality")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to put a lkb to the waiters state. It can
be useful to combine this feature with the "rawmsg" debugfs
functionality. It will bring the DLM lkb into a state that a message
will be parsed by the kernel.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to add an lkb during runtime. This is a
highly debugging feature only, wrong input can crash the kernel. It is a
early state feature as well. The goal is to provide a user interface for
manipulate dlm state and combine it with the rawmsg feature. It is
debugfs functionality, we don't care about UAPI breakage. Even it's
possible to add lkb's/rsb's which could never be exists in such wat by
using normal DLM operation. The user of this interface always need to
think before using this feature, not every crash which happens can really
occur during normal dlm operation.
Future there should be more functionality to add a more realistic lkb
which reflects normal DLM state inside the kernel. For now this is
enough.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a dlm functionality to send a raw dlm message to a
specific cluster node. This raw message can be build by user space and
send out by writing the message to "rawmsg" dlm debugfs file.
There is a in progress scapy dlm module which provides a easy build of
DLM messages in user space. For example:
DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0xe4f48a18, ...)
The goal is to provide an easy reproducable state to crash DLM or to
fuzz the DLM kernel stack if there are possible ways to crash it.
Note: that if the sequence number is zero and dlm version is not set to
3.1 the kernel will automatic will set a right sequence number, otherwise
DLM stack testing is not possible.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
