Add complete infrastructure for per-subvolume I/O metrics collection
and reporting to the MDS. This enables administrators to monitor I/O
patterns at the subvolume granularity, which is useful for multi-tenant
CephFS deployments.
This patch adds:
- CEPHFS_FEATURE_SUBVOLUME_METRICS feature flag for MDS negotiation
- CEPH_SUBVOLUME_ID_NONE constant (0) for unknown/unset state
- Red-black tree based metrics tracker for efficient per-subvolume
aggregation with kmem_cache for entry allocations
- Wire format encoding matching the MDS C++ AggregatedIOMetrics struct
- Integration with the existing CLIENT_METRICS message
- Recording of I/O operations from file read/write and writeback paths
- Debugfs interfaces for monitoring (metrics/subvolumes, metrics/metric_features)
Metrics tracked per subvolume include:
- Read/write operation counts
- Read/write byte counts
- Read/write latency sums (for average calculation)
The metrics are periodically sent to the MDS as part of the existing
metrics reporting infrastructure when the MDS advertises support for
the SUBVOLUME_METRICS feature.
CEPH_SUBVOLUME_ID_NONE enforces subvolume_id immutability. Following
the FUSE client convention, 0 means unknown/unset. Once an inode has
a valid (non-zero) subvolume_id, it should not change during the
inode's lifetime.
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
This patch adds trace points to the Ceph filesystem MDS client:
- request submission (CEPH_MSG_CLIENT_REQUEST) and completion
(CEPH_MSG_CLIENT_REPLY)
- capabilities (CEPH_MSG_CLIENT_CAPS)
These are the central pieces that are useful for analyzing MDS
latency/performance problems from the client's perspective.
In the long run, all doutc() calls should be replaced with
tracepoints. This way, the Ceph filesystem can be traced at any time
(without spamming the kernel log). Additionally, trace points can be
used in BPF programs (which can even deference the pointer parameters
and extract more values).
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
With the previous commit revamping the timeout handling, started isn't
used anymore. It could be taken into account by adjusting the initial
value of the timeout, but there is little point as both callers capture
the timestamp shortly before calling __ceph_open_session() -- the only
thing of note that happens in the interim is taking client->mount_mutex
and that isn't expected to take multiple seconds.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Pull ceph updates from Ilya Dryomov:
- some messenger improvements (Eric and Max)
- address an issue (also affected userspace) of incorrect permissions
being granted to users who have access to multiple different CephFS
instances within the same cluster (Kotresh)
- a bunch of assorted CephFS fixes (Slava)
* tag 'ceph-for-6.18-rc1' of https://github.com/ceph/ceph-client:
ceph: add bug tracking system info to MAINTAINERS
ceph: fix multifs mds auth caps issue
ceph: cleanup in ceph_alloc_readdir_reply_buffer()
ceph: fix potential NULL dereference issue in ceph_fill_trace()
libceph: add empty check to ceph_con_get_out_msg()
libceph: pass the message pointer instead of loading con->out_msg
libceph: make ceph_con_get_out_msg() return the message pointer
ceph: fix potential race condition on operations with CEPH_I_ODIRECT flag
ceph: refactor wake_up_bit() pattern of calling
ceph: fix potential race condition in ceph_ioctl_lazyio()
ceph: fix overflowed constant issue in ceph_do_objects_copy()
ceph: fix wrong sizeof argument issue in register_session()
ceph: add checking of wait_for_completion_killable() return value
ceph: make ceph_start_io_*() killable
libceph: Use HMAC-SHA256 library instead of crypto_shash
The mds auth caps check should also validate the
fsname along with the associated caps. Not doing
so would result in applying the mds auth caps of
one fs on to the other fs in a multifs ceph cluster.
The bug causes multiple issues w.r.t user
authentication, following is one such example.
Steps to Reproduce (on vstart cluster):
1. Create two file systems in a cluster, say 'fsname1' and 'fsname2'
2. Authorize read only permission to the user 'client.usr' on fs 'fsname1'
$ceph fs authorize fsname1 client.usr / r
3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2'
$ceph fs authorize fsname2 client.usr / rw
4. Update the keyring
$ceph auth get client.usr >> ./keyring
With above permssions for the user 'client.usr', following is the
expectation.
a. The 'client.usr' should be able to only read the contents
and not allowed to create or delete files on file system 'fsname1'.
b. The 'client.usr' should be able to read/write on file system 'fsname2'.
But, with this bug, the 'client.usr' is allowed to read/write on file
system 'fsname1'. See below.
5. Mount the file system 'fsname1' with the user 'client.usr'
$sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/
6. Try creating a file on file system 'fsname1' with user 'client.usr'. This
should fail but passes with this bug.
$touch /kmnt_fsname1_usr/file1
7. Mount the file system 'fsname1' with the user 'client.admin' and create a
file.
$sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin
$echo "data" > /kmnt_fsname1_admin/admin_file1
8. Try removing an existing file on file system 'fsname1' with the user
'client.usr'. This shoudn't succeed but succeeds with the bug.
$rm -f /kmnt_fsname1_usr/admin_file1
For more information, please take a look at the corresponding mds/fuse patch
and tests added by looking into the tracker mentioned below.
v2: Fix a possible null dereference in doutc
v3: Don't store fsname from mdsmap, validate against
ceph_mount_options's fsname and use it
v4: Code refactor, better warning message and
fix possible compiler warning
[ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ]
Link: https://tracker.ceph.com/issues/72167
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull vfs workqueue updates from Christian Brauner:
"This contains various workqueue changes affecting the filesystem
layer.
Currently if a user enqueue a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies
to schedule_work() that is using system_wq and queue_work(), that
makes use again of WORK_CPU_UNBOUND.
This replaces the use of system_wq and system_unbound_wq. system_wq is
a per-CPU workqueue which isn't very obvious from the name and
system_unbound_wq is to be used when locality is not required.
So this renames system_wq to system_percpu_wq, and system_unbound_wq
to system_dfl_wq.
This also adds a new WQ_PERCPU flag to allow the fs subsystem users to
explicitly request the use of per-CPU behavior. Both WQ_UNBOUND and
WQ_PERCPU flags coexist for one release cycle to allow callers to
transition their calls. WQ_UNBOUND will be removed in a next release
cycle"
* tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: WQ_PERCPU added to alloc_workqueue users
fs: replace use of system_wq with system_percpu_wq
fs: replace use of system_unbound_wq with system_dfl_wq
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to all the fs subsystem users to
explicitly request the use of the per-CPU behavior. Both flags coexist
for one release cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-4-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
generic_delete_inode() is rather misleading for what the routine is
doing. inode_just_drop() should be much clearer.
The new naming is inconsistent with generic_drop_inode(), so rename that
one as well with inode_ as the suffix.
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
... to be used instead of manually assigning to ->s_d_op.
All in-tree filesystem converted (and field itself is renamed,
so any out-of-tree ones in need of conversion will be caught
by compiler).
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
smatch warnings:
fs/ceph/super.c:1042 ceph_umount_begin() warn: variable dereferenced before check 'fsc' (see line 1041)
vim +/fsc +1042 fs/ceph/super.c
void ceph_umount_begin(struct super_block *sb)
{
struct ceph_fs_client *fsc = ceph_sb_to_fs_client(sb);
doutc(fsc->client, "starting forced umount\n");
^^^^^^^^^^^
Dereferenced
if (!fsc)
^^^^
Checked too late.
return;
fsc->mount_state = CEPH_MOUNT_SHUTDOWN;
__ceph_umount_begin(fsc);
}
The VFS guarantees that the superblock is still
alive when it calls into ceph via ->umount_begin().
Finally, we don't need to check the fsc and
it should be valid. This patch simply removes
the fsc check.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202503280852.YDB3pxUY-lkp@intel.com/
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The CephFS kernel driver forgets to set the filesystem magic signature in
its superblock. As a result, IMA policy rules based on fsmagic matching do
not apply as intended. This causes a major performance regression in Talos
Linux [1] when mounting CephFS volumes, such as when deploying Rook Ceph
[2]. Talos Linux ships a hardened kernel with the following IMA policy
(irrelevant lines omitted):
[...]
dont_measure fsmagic=0xc36400 # CEPH_SUPER_MAGIC
[...]
measure func=FILE_CHECK mask=^MAY_READ euid=0
measure func=FILE_CHECK mask=^MAY_READ uid=0
[...]
Currently, IMA compares 0xc36400 == 0x0 for CephFS files, resulting in all
files opened with O_RDONLY or O_RDWR getting measured with SHA512 on every
open(2):
10 69990c87e8af323d47e2d6ae4... ima-ng sha512:<hash> /data/cephfs/test-file
Since O_WRONLY is rare, this results in an order of magnitude lower
performance than expected for practically all file operations. Properly
setting CEPH_SUPER_MAGIC in the CephFS superblock resolves the regression.
Tests performed on a 3x replicated Ceph v19.3.0 cluster across three
i5-7200U nodes each equipped with one Micron 7400 MAX M.2 disk (BlueStore)
and Gigabit ethernet, on Talos Linux v1.10.2:
FS-Mark 3.3
Test: 500 Files, Empty
Files/s > Higher Is Better
6.12.27-talos . 16.6 |====
+twelho patch . 208.4 |====================================================
FS-Mark 3.3
Test: 500 Files, 1KB Size
Files/s > Higher Is Better
6.12.27-talos . 15.6 |=======
+twelho patch . 118.6 |====================================================
FS-Mark 3.3
Test: 500 Files, 32 Sub Dirs, 1MB Size
Files/s > Higher Is Better
6.12.27-talos . 12.7 |===============
+twelho patch . 44.7 |=====================================================
IO500 [3] 2fcd6d6 results (benchmarks within variance omitted):
| IO500 benchmark | 6.12.27-talos | +twelho patch | Speedup |
|-------------------|----------------|----------------|-----------|
| mdtest-easy-write | 0.018524 kIOPS | 1.135027 kIOPS | 6027.33 % |
| mdtest-hard-write | 0.018498 kIOPS | 0.973312 kIOPS | 5161.71 % |
| ior-easy-read | 0.064727 GiB/s | 0.155324 GiB/s | 139.97 % |
| mdtest-hard-read | 0.018246 kIOPS | 0.780800 kIOPS | 4179.29 % |
This applies outside of synthetic benchmarks as well, for example, the time
to rsync a 55 MiB directory with ~12k of mostly small files drops from an
unusable 10m5s to a reasonable 26s (23x the throughput).
[1]: https://www.talos.dev/
[2]: https://www.talos.dev/v1.10/kubernetes-guides/configuration/ceph-with-rook/
[3]: https://github.com/IO500/io500
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Marttinen <twelho@welho.tech>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The generic/421 fails to finish because of the issue:
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.894678] INFO: task kworker/u48:0:11 blocked for more than 122 seconds.
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.895403] Not tainted 6.13.0-rc5+ #1
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.895867] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.896633] task:kworker/u48:0 state:D stack:0 pid:11 tgid:11 ppid:2 flags:0x00004000
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.896641] Workqueue: writeback wb_workfn (flush-ceph-24)
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897614] Call Trace:
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897620] <TASK>
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897629] __schedule+0x443/0x16b0
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897637] schedule+0x2b/0x140
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897640] io_schedule+0x4c/0x80
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897643] folio_wait_bit_common+0x11b/0x310
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897646] ? _raw_spin_unlock_irq+0xe/0x50
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897652] ? __pfx_wake_page_function+0x10/0x10
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897655] __folio_lock+0x17/0x30
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897658] ceph_writepages_start+0xca9/0x1fb0
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897663] ? fsnotify_remove_queued_event+0x2f/0x40
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897668] do_writepages+0xd2/0x240
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897672] __writeback_single_inode+0x44/0x350
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897675] writeback_sb_inodes+0x25c/0x550
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897680] wb_writeback+0x89/0x310
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897683] ? finish_task_switch.isra.0+0x97/0x310
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897687] wb_workfn+0xb5/0x410
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897689] process_one_work+0x188/0x3d0
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897692] worker_thread+0x2b5/0x3c0
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897694] ? __pfx_worker_thread+0x10/0x10
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897696] kthread+0xe1/0x120
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897699] ? __pfx_kthread+0x10/0x10
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897701] ret_from_fork+0x43/0x70
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897705] ? __pfx_kthread+0x10/0x10
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897707] ret_from_fork_asm+0x1a/0x30
Jan 3 14:25:27 ceph-testing-0001 kernel: [ 369.897711] </TASK>
There are several issues here:
(1) ceph_kill_sb() doesn't wait ending of flushing
all dirty folios/pages because of racy nature of
mdsc->stopping_blockers. As a result, mdsc->stopping
becomes CEPH_MDSC_STOPPING_FLUSHED too early.
(2) The ceph_inc_osd_stopping_blocker(fsc->mdsc) fails
to increment mdsc->stopping_blockers. Finally,
already locked folios/pages are never been unlocked
and the logic tries to lock the same page second time.
(3) The folio_batch with found dirty pages by
filemap_get_folios_tag() is not processed properly.
And this is why some number of dirty pages simply never
processed and we have dirty folios/pages after unmount
anyway.
This patch fixes the issues by means of:
(1) introducing dirty_folios counter and flush_end_wq
waiting queue in struct ceph_mds_client;
(2) ceph_dirty_folio() increments the dirty_folios
counter;
(3) writepages_finish() decrements the dirty_folios
counter and wake up all waiters on the queue
if dirty_folios counter is equal or lesser than zero;
(4) adding in ceph_kill_sb() method the logic of
checking the value of dirty_folios counter and
waiting if it is bigger than zero;
(5) adding ceph_inc_osd_stopping_blocker() call in the
beginning of the ceph_writepages_start() and
ceph_dec_osd_stopping_blocker() at the end of
the ceph_writepages_start() with the goal to resolve
the racy nature of mdsc->stopping_blockers.
sudo ./check generic/421
FSTYP -- ceph
PLATFORM -- Linux/x86_64 ceph-testing-0001 6.13.0+ #137 SMP PREEMPT_DYNAMIC Mon Feb 3 20:30:08 UTC 2025
MKFS_OPTIONS -- 127.0.0.1:40551:/scratch
MOUNT_OPTIONS -- -o name=fs,secret=<secret>,ms_mode=crc,nowsync,copyfrom 127.0.0.1:40551:/scratch /mnt/scratch
generic/421 7s ... 4s
Ran: generic/421
Passed all 1 tests
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Link: https://lore.kernel.org/r/20250205000249.123054-5-slava@dubeyko.com
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
It becomes a path component, so it shouldn't exceed NAME_MAX
characters. This was hardened in commit c152737be2 ("ceph: Use
strscpy() instead of strcpy() in __get_snap_name()"), but no actual
check was put in place.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Previously, the "name" in the new device syntax "<name>@<fsid>.<fsname>"
was ignored because (presumably) tests were done using mount.ceph which
also passed the entity name using "-o name=foo". If mounting is done
without the mount.ceph helper, the new device id syntax fails to set
the name properly.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/68516
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We have hit a race between cap releases and cap revoke request
that will cause the check_caps() to miss sending a cap revoke ack
to MDS. And the client will depend on the cap release to release
that revoking caps, which could be delayed for some unknown reasons.
In Kclient we have figured out the RCA about race and we need
a way to explictly trigger this manually could help to get rid
of the caps revoke stuck issue.
Link: https://tracker.ceph.com/issues/67221
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The kmalloc size of pagevec mempool is incorrectly calculated.
It misses the size of page pointer and only accounts the number for the array.
Fixes: a0102bda5b ("ceph: move sb->wb_pagevec_pool to be a global mempool")
Signed-off-by: ethanwu <ethanwu@synology.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Yes, yes, I know the slab people were planning on going slow and letting
every subsystem fight this thing on their own. But let's just rip off
the band-aid and get it over and done with. I don't want to see a
number of unnecessary pull requests just to get rid of a flag that no
longer has any meaning.
This was mainly done with a couple of 'sed' scripts and then some manual
cleanup of the end result.
Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we converted cephfs internally to account for idmapped mounts
allow the creation of idmapped mounts on by setting the FS_ALLOW_IDMAP
flag.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This parameter is used to decide if we allow
to perform IO on idmapped mount in case when MDS lacks
support of CEPHFS_FEATURE_HAS_OWNER_UIDGID feature.
In this case we can't properly handle MDS permission
checks and if UID/GID-based restrictions are enabled
on the MDS side then IO requests which go through an
idmapped mount may fail with -EACCESS/-EPERM.
Fortunately, for most of users it's not a case and
everything should work fine. But we put work "unsafe"
in the module parameter name to warn users about
possible problems with this feature and encourage
update of cephfs MDS.
Suggested-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The sync_filesystem() will flush all the dirty buffer and submit the
osd reqs to the osdc and then is blocked to wait for all the reqs to
finish. But the when the reqs' replies come, the reqs will be removed
from osdc just before the req->r_callback()s are called. Which means
the sync_filesystem() will be woke up by leaving the req->r_callback()s
are still running.
This will be buggy when the waiter require the req->r_callback()s to
release some resources before continuing. So we need to make sure the
req->r_callback()s are called before removing the reqs from the osdc.
WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0
CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1
Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015
RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0
RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00
RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000
RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000
R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40
R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000
FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
generic_shutdown_super+0x47/0x120
kill_anon_super+0x14/0x30
ceph_kill_sb+0x36/0x90 [ceph]
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x67/0xb0
exit_to_user_mode_prepare+0x23d/0x240
syscall_exit_to_user_mode+0x25/0x60
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd83dc39e9b
We need to increase the blocker counter to make sure all the osd
requests' callbacks have been finished just before calling the
kill_anon_super() when unmounting.
Link: https://tracker.ceph.com/issues/58126
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Alex MarkuzeandIlya Dryomov
Linus Torvalds
Kees Cook
Max KellermannandIlya Dryomov
Kotresh HRandIlya Dryomov
Marco CrivellariandChristian Brauner
Mateusz GuzikandChristian Brauner
Al Viro
Viacheslav DubeykoandIlya Dryomov
Dennis MarttinenandIlya Dryomov
Patrick DonnellyandIlya Dryomov
Xiubo LiandIlya Dryomov
ethanwuandIlya Dryomov
Alexander MikhalitsynandIlya Dryomov