This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
In a few cases the code compares 32-bit value to a SIZE_MAX derived
constant which is much higher than that value on 64-bit platforms,
Clang, in particular, is not happy about this
fs/ceph/snap.c:377:10: error: result of comparison of constant 2305843009213693948 with expression of type 'u32' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
377 | if (num > (SIZE_MAX - sizeof(*snapc)) / sizeof(u64))
| ~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by casting to size_t. Note, that possible replacement of SIZE_MAX
by U32_MAX may lead to the behaviour changes on the corner cases.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull ceph updates from Ilya Dryomov:
- support for idmapped mounts in CephFS (Christian Brauner, Alexander
Mikhalitsyn).
The series was originally developed by Christian and later picked up
and brought over the finish line by Alexander, who also contributed
an enabler on the MDS side (separate owner_{u,g}id fields on the
wire).
The required exports for mnt_idmap_{get,put}() in VFS have been acked
by Christian and received no objection from Christoph.
- a churny change in CephFS logging to include cluster and client
identifiers in log and debug messages (Xiubo Li).
This would help in scenarios with dozens of CephFS mounts on the same
node which are getting increasingly common, especially in the
Kubernetes world.
* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
ceph: allow idmapped mounts
ceph: allow idmapped atomic_open inode op
ceph: allow idmapped set_acl inode op
ceph: allow idmapped setattr inode op
ceph: pass idmap to __ceph_setattr
ceph: allow idmapped permission inode op
ceph: allow idmapped getattr inode op
ceph: pass an idmapping to mknod/symlink/mkdir
ceph: add enable_unsafe_idmap module parameter
ceph: handle idmapped mounts in create_request_message()
ceph: stash idmapping in mdsc request
fs: export mnt_idmap_get/mnt_idmap_put
libceph, ceph: move mdsmap.h to fs/ceph
ceph: print cluster fsid and client global_id in all debug logs
ceph: rename _to_client() to _to_fs_client()
ceph: pass the mdsc to several helpers
libceph: add doutc and *_client debug macros support
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull ceph updates from Ilya Dryomov:
"Mixed with some fixes and cleanups, this brings in reasonably complete
fscrypt support to CephFS! The list of things which don't work with
encryption should be fairly short, mostly around the edges: fallocate
(not supported well in CephFS to begin with), copy_file_range
(requires re-encryption), non-default striping patterns.
This was a multi-year effort principally by Jeff Layton with
assistance from Xiubo Li, Luís Henriques and others, including several
dependant changes in the MDS, netfs helper library and fscrypt
framework itself"
* tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits)
ceph: make num_fwd and num_retry to __u32
ceph: make members in struct ceph_mds_request_args_ext a union
rbd: use list_for_each_entry() helper
libceph: do not include crypto/algapi.h
ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper
ceph: fix updating i_truncate_pagecache_size for fscrypt
ceph: wait for OSD requests' callbacks to finish when unmounting
ceph: drop messages from MDS when unmounting
ceph: update documentation regarding snapshot naming limitations
ceph: prevent snapshot creation in encrypted locked directories
ceph: add support for encrypted snapshot names
ceph: invalidate pages when doing direct/sync writes
ceph: plumb in decryption during reads
ceph: add encryption support to writepage and writepages
ceph: add read/modify/write to ceph_sync_write
ceph: align data in pages in ceph_sync_write
ceph: don't use special DIO path for encrypted inodes
ceph: add truncate size handling support for fscrypt
ceph: add object version support for sync read
libceph: allow ceph_osdc_new_request to accept a multi-op read
...
When unmounting all the dirty buffers will be flushed and after
the last osd request is finished the last reference of the i_count
will be released. Then it will flush the dirty cap/snap to MDSs,
and the unmounting won't wait the possible acks, which will ihold
the inodes when updating the metadata locally but makes no sense
any more, of this. This will make the evict_inodes() to skip these
inodes.
If encrypt is enabled the kernel generate a warning when removing
the encrypt keys when the skipped inodes still hold the keyring:
WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0
CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1
Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015
RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0
RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00
RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000
RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000
R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40
R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000
FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
generic_shutdown_super+0x47/0x120
kill_anon_super+0x14/0x30
ceph_kill_sb+0x36/0x90 [ceph]
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x67/0xb0
exit_to_user_mode_prepare+0x23d/0x240
syscall_exit_to_user_mode+0x25/0x60
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd83dc39e9b
Later the kernel will crash when iput() the inodes and dereferencing
the "sb->s_master_keys", which has been released by the
generic_shutdown_super().
Link: https://tracker.ceph.com/issues/59162
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The 'i_wr_ref' is used to track the 'Fb' caps, while whenever the 'Fb'
caps is took the kclient will always take the 'Fw' caps at the same
time. That means it will always be a false check in __ceph_finish_cap_snap().
When writing to buffer the kclient will take both 'Fb|Fw' caps and then
write the contents to the buffer pages by increasing the 'i_wrbuffer_ref'
and then just release both 'Fb|Fw'. This is different with the user
space libcephfs, which will keep the 'Fb' being took and use 'i_wr_ref'
instead of 'i_wrbuffer_ref' to track this until the buffer is flushed
to Rados.
We need to defer flushing the capsnap until the corresponding buffer
pages are all flushed to Rados, and at the same time just trigger to
flush the buffer pages immediately.
Link: https://tracker.ceph.com/issues/48640
Link: https://tracker.ceph.com/issues/59343
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is a race between capsnaps flush and removing the inode from
'mdsc->snap_flush_list' list:
== Thread A == == Thread B ==
ceph_queue_cap_snap()
-> allocate 'capsnapA'
->ihold('&ci->vfs_inode')
->add 'capsnapA' to 'ci->i_cap_snaps'
->add 'ci' to 'mdsc->snap_flush_list'
...
== Thread C ==
ceph_flush_snaps()
->__ceph_flush_snaps()
->__send_flush_snap()
handle_cap_flushsnap_ack()
->iput('&ci->vfs_inode')
this also will release 'ci'
...
== Thread D ==
ceph_handle_snap()
->flush_snaps()
->iterate 'mdsc->snap_flush_list'
->get the stale 'ci'
->remove 'ci' from ->ihold(&ci->vfs_inode) this
'mdsc->snap_flush_list' will WARNING
To fix this we will increase the inode's i_count ref when adding 'ci'
to the 'mdsc->snap_flush_list' list.
[ idryomov: need_put int -> bool ]
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When received corrupted snap trace we don't know what exactly has
happened in MDS side. And we shouldn't continue IOs and metadatas
access to MDS, which may corrupt or get incorrect contents.
This patch will just block all the further IO/MDS requests
immediately and then evict the kclient itself.
The reason why we still need to evict the kclient just after
blocking all the further IOs is that the MDS could revoke the caps
faster.
Link: https://tracker.ceph.com/issues/57686
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
To make the logs more readable such as for log likes:
ceph: will move 00000000a42b796b to split realm 100000003ed 000000007146df45
With this it will always show the inode numbers instead the inode
addresses.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We will only track the uppest parent snapshot realm from which we
need to rebuild the snapshot contexts _downward_ in hierarchy. For
all the others having no new snapshot we will do nothing.
This fix will avoid calling ceph_queue_cap_snap() on some inodes
inappropriately. For example, with the code in mainline, suppose there
are 2 directory hierarchies (with 6 directories total), like this:
/dir_X1/dir_X2/dir_X3/
/dir_Y1/dir_Y2/dir_Y3/
Firstly, make a snapshot under /dir_X1/dir_X2/.snap/snap_X2, then make a
root snapshot under /.snap/root_snap. Every time we make snapshots under
/dir_Y1/..., the kclient will always try to rebuild the snap context for
snap_X2 realm and finally will always try to queue cap snaps for dir_Y2
and dir_Y3, which makes no sense.
That's because the snap_X2's seq is 2 and root_snap's seq is 3. So when
creating a new snapshot under /dir_Y1/... the new seq will be 4, and
the mds will send the kclient a snapshot backtrace in _downward_
order: seqs 4, 3.
When ceph_update_snap_trace() is called, it will always rebuild the from
the last realm, that's the root_snap. So later when rebuilding the snap
context, the current logic will always cause it to rebuild the snap_X2
realm and then try to queue cap snaps for all the inodes related in that
realm, even though it's not necessary.
This is accompanied by a lot of these sorts of dout messages:
"ceph: queue_cap_snap 00000000a42b796b nothing dirty|writing"
Fix the logic to avoid this situation.
Also, the 'invalidate' word is not precise here. In actuality, it will
cause a rebuild of the existing snapshot contexts or just build
non-existent ones. Rename it to 'rebuild_snapcs'.
URL: https://tracker.ceph.com/issues/44100
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There could be huge number of capsnaps around at any given time. On
x86_64 the structure is 248 bytes, which will be rounded up to 256 bytes
by kzalloc. Move this to a dedicated slabcache to save 8 bytes for each.
[ jlayton: use kmem_cache_zalloc ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Consolidate some fiddly code for changing an inode's snap_realm
into a new helper function, and change the callers to use it.
While we're in here, nothing uses the i_snap_realm_counter field, so
remove that from the inode.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The ceph_cap_flush structures are usually dynamically allocated, but
the ceph_cap_snap has an embedded one.
When force umounting, the client will try to remove all the session
caps. During this, it will free them, but that should not be done
with the ones embedded in a capsnap.
Fix this by adding a new boolean that indicates that the cap flush is
embedded in a capsnap, and skip freeing it if that's set.
At the same time, switch to using list_del_init() when detaching the
i_list and g_list heads. It's possible for a forced umount to remove
these objects but then handle_cap_flushsnap_ack() races in and does the
list_del_init() again, corrupting memory.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52283
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is a race in ceph_put_snap_realm. The change to the nref and the
spinlock acquisition are not done atomically, so you could decrement
nref, and before you take the spinlock, the nref is incremented again.
At that point, you end up putting it on the empty list when it
shouldn't be there. Eventually __cleanup_empty_realms runs and frees
it when it's still in-use.
Fix this by protecting the 1->0 transition with atomic_dec_and_lock,
and just drop the spinlock if we can get the rwsem.
Because these objects can also undergo a 0->1 refcount transition, we
must protect that change as well with the spinlock. Increment locklessly
unless the value is at 0, in which case we take the spinlock, increment
and then take it off the empty list if it did the 0->1 transition.
With these changes, I'm removing the dout() messages from these
functions, as well as in __put_snap_realm. They've always been racy, and
it's better to not print values that may be misleading.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/46419
Reported-by: Mark Nelson <mnelson@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Kees Cook
Andy ShevchenkoandIlya Dryomov
Linus Torvalds
Xiubo LiandIlya Dryomov
Jeff LaytonandChristian Brauner
David HowellsandLinus Torvalds