When a system contains multiple USB controllers, the global ci_role_switch
variable may be overwritten by subsequent driver initialization code.
This can cause issues in the following cases:
- The 2nd ci_hdrc_probe() sees ci_role_switch.fwnode as non-NULL even
though the "usb-role-switch" property is not present for the controller.
- When the ci_hdrc device is unbound and bound again, ci_role_switch
fwnode will not be reassigned, and the old value will be used instead.
Convert ci_role_switch to a local variable to fix these issues.
Fixes: 05559f10ed ("usb: chipidea: add role switch class support")
Cc: stable <stable@kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260427075755.3611217-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For USB role switch-triggered IRQ, ID and VBUS change come together, for
example when switching from host to device mode. ID indicate a role switch
and VBUS is required to determine whether the device controller can start
operating. Currently, ci_irq_handler() handles only a single event per
invocation. This can cause an issue where switching to device mode results
in the device controller not working at all. Allowing ci_irq_handler() to
handle both ID and VBUS change in one call resolves this issue.
Meanwhile, this change also affects the VBUS event handling logic.
Previously, if an ID event indicated host mode the VBUS IRQ will be
ignored as the device disable BSE when stop() is called. With the new
behavior, if ID and VBUS IRQ occur together and the target mode is host,
the VBUS event is queued and ci_handle_vbus_change() will call
usb_gadget_vbus_connect(), after which USBMODE is switched to device mode,
causing host mode to stop working. To prevent this, an additional check is
added to skip handling VBUS event when current role is not device mode.
Suggested-by: Peter Chen <peter.chen@kernel.org>
Fixes: e1b5d2bed6 ("usb: chipidea: core: handle usb role switch in a common way")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260402071457.2516021-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
When add a platform device by calling ci_hdrc_add_device(), this device
will reuse OF node of its parent device. If power-domains property is
provided in the OF node, both two platform devices will be attached to
the same power domain. This should be unnecessary and may bring other
inconsistent behavior. For example, to support wakeup capability, these
two platform device need different power domain state. The parent device
need NOT power domain on for out-band interrupt, but the ci_hdrc device
need power domain on for in-band interrupt. The i.MX95 Soc support
out-band wakeup interrupt, the user need to enable wakeup for the parent
device, but if the user also enable wakeup for ci_hdrc device, the power
domain will keep at on state finally. To exclude such inconsistent
behavior and simplify the power management, detach power domain for ci_hdrc
platform device.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, the imx deivice controller has below limitations:
1. can't generate short packet interrupt if IOC not set in dTD. So if one
request span more than one dTDs and only the last dTD set IOC, the usb
request will pending there if no more data comes.
2. the controller can't accurately deliver data to differtent usb requests
in some cases due to short packet. For example: one usb request span 3
dTDs, then if the controller received a short packet the next packet
will go to 2nd dTD of current request rather than the first dTD of next
request.
3. can't build a bus packet use multiple dTDs. For example: controller
needs to send one packet of 512 bytes use dTD1 (200 bytes) + dTD2
(312 bytes), actually the host side will see 200 bytes short packet.
Based on these limits, add CI_HDRC_HAS_SHORT_PKT_LIMIT flag and use it on
imx platforms.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240923081203.2851768-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/usb to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240924084329.53094-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When power is recycled in usb controller during system power management,
the controller will recognize it and switch role if role has been changed
during power lost. In current design, it will be completed in resume()
function. However, this may bring issues since usb class devices have
their pm operations too and these device's resume() functions are still
not being called at this point. When usb controller recognized host role
should be stopped, these usb class devices will be removed at this point.
But these usb class devices can't be removed in some cases, such as scsi
devices. Since scsi driver may sync data to U-disk, however it will block
there because scsi drvier can only handle pm request when is in suspended
state. Therefore, there may exist a dependency between ci_resume() and usb
class device's resume(). To break this potential dependency, we need to
handle power lost work in a workqueue.
Fixes: 74494b3321 ("usb: chipidea: core: add controller resume support when controller is powered off")
cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240119123537.3614838-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the chipidea driver introduce extcon for id and vbus, it's able
to wakeup from another irq source, in case the system with extcon ID
cable, wakeup from usb ID cable and device removal, the usb device
disconnect irq may come firstly before the extcon notifier while system
resume, so we will get 2 "wakeup" irq, one for usb device disconnect;
and one for extcon ID cable change(real wakeup event), current driver
treat them as 2 successive wakeup irq so can't handle it correctly, then
finally the usb irq can't be enabled. This patch adds a check to bypass
further usb events before controller resume finished to fix it.
Fixes: 1f874edcb7 ("usb: chipidea: add runtime power management support")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20231228110753.1755756-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some NXP processors using ChipIdea USB IP have a bug when frame babble is
detected.
Issue description:
In USB camera test, our controller is host in HS mode. In ISOC IN, when
device sends data across the micro frame, it causes the babble in host
controller. This will clear the PE bit. In spec, it also requires to set
the PEC bit and then set the PCI bit. Without the PCI interrupt, the
software does not know the PE is cleared.
This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted
platform datas. And the ehci host driver will assert PEC by SW when
specific conditions are satisfied.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230517230239.187727-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the USB fixes here, and the USB gadget update for future
development patches to be based on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
