Pull soundwire updates from Vinod Koul:
- Core: DP prepare polling for avoiding interrupt deadlock
- AMD clock init and bandwidth refactoring
- Intel more codecs to wake list, clear message on before signaling
waiting thread
* tag 'soundwire-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_auxdevice: Add cs42l49 to wake_capable_list
soundwire: cadence: Clear message complete before signaling waiting thread
soundwire: Intel: test bus.bpt_stream before assigning it
soundwire: bus: demote UNATTACHED state warnings to dev_dbg()
soundwire: stream: Poll for DP prepare to avoid interrupt deadlock
soundwire: amd: refactor bandwidth calculation logic
soundwire: amd: add clock init control function
soundwire: intel_auxdevice: Add CS47L47 to wake_capable_list
soundwire: slave: Don't register devices that are disabled in ACPI
soundwire: sdw.h: repair names and format of kernel-doc comments
Clear the CDNS_MCP_INT_RX_WL interrupt before signaling completion.
This is to prevent the potential race where:
- The main thread is scheduled immediately the completion is signaled,
and starts a new message
- The RX_WL IRQ for this new message happens before sdw_cdns_irq() has
been re-scheduled.
- When sdw_cdns_irq() is re-scheduled it clears the new RX_WL interrupt.
MAIN THREAD | IRQ THREAD
|
_cdns_xfer_msg() |
{ |
write data to FIFO |
wait_for_completion_timeout() |
<BLOCKED> | <---- RX_WL IRQ
| sdw_cdns_irq()
| {
| signal completion
<== RESCHEDULE <==
Handle message completion |
} |
|
Start new message |
_cdns_xfer_msg() |
{ |
write data to FIFO |
wait_for_completion_timeout() |
<BLOCKED> | <---- RX_WL IRQ
==> RESCHEDULE ==>
| // New RX_WL IRQ is cleared before
| // it has been handled.
| clear CDNS_MCP_INTSTAT
| return IRQ_HANDLED;
| }
Before this change, this error message was sometimes seen on kernels
that have large amounts of debugging enabled:
SCP Msg trf timed out
This error indicates that the completion has not been signalled after
500ms.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 956baa1992 ("soundwire: cdns: Add sdw_master_ops and IO transfer support")
Reported-by: Norman Bintang <normanbt@google.com>
Closes: https://issuetracker.google.com/issues/477099834
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260310113133.1707288-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We only allow up to 1 bpt stream running on a SoundWire bus.
bus.bpt_stream will be assigned when it is opened and will be set to
NULL when it is closed. We do check bus->bpt_stream_refcount if the
stream type is SDW_STREAM_BPT in sdw_master_rt_alloc(), but at that
moment the bpt stream is allocated and set to bus.bpt_stream. It will
lead to the original bus.bpt_stream be changed to the new and not used
bpt stream. And it will be released and set to NULL when
sdw_slave_bpt_stream_add() return error as it supposed to. Then the
original stream will try to use the NULL bus.bpt_stream.
Fixes: 4c1ce9f37d ("soundwire: intel_ace2x: add BPT send_async/wait callbacks")
Reported-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260126054045.2504103-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dev_warn() messages in sdw_handle_slave_status() for UNATTACHED
transitions were added in commit d1b3285570 ("soundwire: bus: add
dev_warn() messages to track UNATTACHED devices") to debug attachment
failures with dynamic debug enabled.
These warnings fire during normal operation -- for example when a codec
driver triggers a hardware reset after firmware download, causing the
device to momentarily go UNATTACHED before re-attaching -- producing
misleading noise on every boot.
Demote the messages to dev_dbg() so they remain available via dynamic
debug for diagnosing real attachment failures without alarming users
during expected initialization sequences.
Fixes: d1b3285570 ("soundwire: bus: add dev_warn() messages to track UNATTACHED devices")
Signed-off-by: Cole Leavitt <cole@unwrap.rs>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260218180210.9263-1-cole@unwrap.rs
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace the wait_for_completion_timeout() in sdw_prep_deprep_slave_ports()
with a read_poll_timeout().
The original intent of the wait_for_completion_timeout() was to wait for
the port prepare interrupt. But at this time the code is holding the
bus_lock, which prevents the interrupt handler from running. Because of
this, the port_prep completion will not be signaled and the
wait_for_completion_timeout() will always timeout.
Rewriting the code to avoid taking the bus_lock carries risks, and
needs careful consideration of the consequences. It is safer and simpler
to replace the completion with a simple register poll.
As the code is holding the bus_lock, it is already blocking other activity
so consuming control channel bandwidth for polling isn't really a concern.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260227111648.175548-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For current platforms(ACP6.3/ACP7.0/ACP7.1/ACP7.2), AMD SoundWire manager
doesn't have banked registers for data port programming on Manager's side.
Need to use fixed block offsets, hstart & hstop for manager ports.
Earlier amd manager driver has support for 12 MHz as a bus clock frequency
where frame rate is 48000 and number of bits is 500, frame shape as
50 x 10 with fixed block offset mapping based on port number.
Got a new requirement to support 6 MHz as a bus clock frequency.
For 6 MHz bus clock frequency amd manager driver needs to support two
different frame shapes i.e number of bits as 250 with frame rate as 48000
and frame shape as 125 x 2 and for the second combination number of bits as
500 where frame rate is 24000 and frame shape is 50 x 10.
Few SoundWire peripherals doesn't support 125 x 2 as a frame shape for
6 MHz bus clock frequency. They have explicit requirement for the frame
shape. In this scenario, amd manager driver needs to use 50 x 10 as a frame
shape where frame rate is 24000. Based on the platform and SoundWire
topology for 6Mhz support frame shape will be decided which is part of
SoundWire manager DisCo tables.
For current platforms, amd manager driver supports only two bus clock
frequencies(12 MHz & 6 MHz). Refactor bandwidth logic to support different
bus clock frequencies.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260226065638.1251771-3-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
Pull soundwire fix from Vinod Koul:
- Single off-by-one fix for allocating slave id
* tag 'soundwire-6.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: fix off-by-one when allocating slave IDs
The ace2x driver can optionally use the HDA infrastructure, but can still
build without that. However, with SND_HDA_CORE=m and SND_HDA_ALIGNED_MMIO=y,
it fails to link as built-in:
aarch64-linux-ld: drivers/soundwire/intel_ace2x.o: in function `intel_shim_wake':
intel_ace2x.c:(.text+0x2518): undefined reference to `snd_hdac_aligned_read'
aarch64-linux-ld: intel_ace2x.c:(.text+0x25d4): undefined reference to `snd_hdac_aligned_read'
aarch64-linux-ld: intel_ace2x.c:(.text+0x268c): undefined reference to `snd_hdac_aligned_write'
Add a Kconfig dependency that forces the soundwire driver to be a loadable
module if necessary.
Fixes: 79e7123c07 ("soundwire: intel_ace2x: fix wakeup handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251223215014.534756-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
These are nearly identical to the respective driver callbacks. The only
differences are that .remove() returns void instead of int and .shutdown()
has to cope for unbound devices.
The objective is to get rid of users of struct device_driver callbacks
.probe(), .remove() and .shutdown() to eventually remove these.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20251215174925.1327021-6-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
