Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250111185405.183824-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/rtc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241007205803.444994-6-u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
STM32 RTC can pulse some SOC pins when an RTC alarm expires.
This patch adds this functionality for alarm A. The pulse can out on three
pins RTC_OUT1, RTC_OUT2, RTC_OUT2_RMP (PC13, PB2, PI8 on stm32mp15)
(PC13, PB2, PI1 on stm32mp13) (PC13, PF4/PF6, PI8 on stm32mp25).
This patch only adds the functionality for devices which are using
st,stm32mp1-rtc and st,stm32mp25-rtc compatible.
Add "alarm-a" in pinmux functions.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240722160022.454226-5-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RTC is able to output on a pin the "LSE" internal clock.
STM32 RTC is now registered as a clock provider.
It provides rtc_lsco clock, that means RTC_LSCO is output on either
RTC_OUT1 or RTC_OUT2_RMP, depending on pinmux DT property.
The clock is marked as CLK_IGNORE_UNUSED and CLK_IS_CRITICAL because
RTC_LSCO can be early required by devices needed it to init.
Add LSCO in pinmux functions.
Add "stm32_rtc_clean_outs" to disable LSCO. As RTC is part of "backup"
power domain, it is not reset during shutdown or reboot. So force LSCO
disable at probe.
Co-developed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20240722160022.454226-4-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
After the switch to SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and a subsequent
fix, stm32_rtc_{suspend,resume}() are unused when CONFIG_PM_SLEEP is not
set because SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is a no-op in that
configuration:
drivers/rtc/rtc-stm32.c:904:12: error: 'stm32_rtc_resume' defined but not used [-Werror=unused-function]
904 | static int stm32_rtc_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/rtc/rtc-stm32.c:894:12: error: 'stm32_rtc_suspend' defined but not used [-Werror=unused-function]
894 | static int stm32_rtc_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The non-"SET_" version of this macro, NOIRQ_SYSTEM_SLEEP_PM_OPS(), is
designed to handle this situation by only assigning the callbacks when
CONFIG_PM_SLEEP is set while allowing the functions to appear used to
the compiler. Switch to that macro to resolve the warnings. There is no
functional change with this, as SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is
defined using NOIRQ_SYSTEM_SLEEP_PM_OPS() when CONFIG_PM_SLEEP is set.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230815-rtc-stm32-unused-pm-funcs-v1-1-82eb8e02d903@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
After a previous commit changed the driver over to
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(), the suspend/resume
functions must no longer be hidden behind an #ifdef:
In file included from include/linux/clk.h:13,
from drivers/rtc/rtc-stm32.c:8:
drivers/rtc/rtc-stm32.c:927:39: error: 'stm32_rtc_suspend' undeclared here (not in a function); did you mean 'stm32_rtc_probe'?
927 | SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stm32_rtc_suspend, stm32_rtc_resume)
| ^~~~~~~~~~~~~~~~~
include/linux/kernel.h:58:44: note: in definition of macro 'PTR_IF'
58 | #define PTR_IF(cond, ptr) ((cond) ? (ptr) : NULL)
| ^~~
include/linux/pm.h:329:26: note: in expansion of macro 'pm_sleep_ptr'
329 | .suspend_noirq = pm_sleep_ptr(suspend_fn), \
| ^~~~~~~~~~~~
Fixes: fb9a7e5360 ("rtc: stm32: change PM callbacks to "_noirq()"")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230801105932.3738430-1-arnd@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230724205456.767430-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
stm32_rtc_valid_alrm function has some issues :
- arithmetical operations are impossible on BCD values
- "cur_mon + 1" can overflow
- the use case with the next month, the same day/hour/minutes went wrong
To solve that, we prefer to use timestamp comparison.
e.g. : On 5 Dec. 2021, the alarm limit is 5 Jan. 2022 (+31 days)
On 31 Jan 2021, the alarm limit is 28 Feb. 2022 (+28 days)
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230705174357.353616-7-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The rtc is used to update the stgen counter on wake up from
low power modes, so it needs to be as much accurate as possible.
The maximization of asynchronous divider leads to a 4ms rtc
precision clock.
By decreasing pred_a to 0, it will have pred_s=32767 (when
need_accuracy is true), so stgen clock becomes more accurate
with 30us precision.
Nevertheless this will leads to an increase of power consumption.
Signed-off-by: Christophe Guibout <christophe.guibout@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230705174357.353616-4-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RTC counters are stopped when INIT bit in ISR register is set and
start counting from the (eventual) new value when INIT is reset.
In stm32_rtc_init(), called during probe, the INIT bit is set to
program the prescaler and the 24h mode. This halts the RTC counter
at each probe tentative causing the RTC time to loose from 0.3s to
0.8s at each kernel boot.
If the RTC is battery powered, both prescaler value and 24h mode
are kept during power cycle and there is no need to program them
again.
Check if the desired prescaler value and the 24h mode are already
programmed, then skip reprogramming them to avoid halting the time
counter.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230705174357.353616-3-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date and time are read from two separate RTC registers.
To ensure consistency between the two registers, reading the time
register locks the values in the shadow date register until the
date register is read.
Thus, the whole date/time read requires reading the time register
first, followed by reading the date register.
If the reads are done in reversed order, the shadow date register
will remain locked until a future read operation. The future read
will read the former date value that could be already invalid.
Fix the read order of date/time registers in stm32_rtc_valid_alrm()
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230705174357.353616-2-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There is no more needs to use a dedicated wake up interrupt for RTC as
EXTI block manages by itself now all interrupt lines.
Dedicated wakeup interrupt has been introduced with STM32 MP1 support
commit b72252b658 ("rtc: stm32: add stm32mp1 rtc support") because GIC &
EXTI interrupts were not yet linked in EXTI driver.
Removing this interrupt won't break compatibility with device trees which
do use two interrupts entries: it could only prevent wakeup from low power
modes on STM32MP1x, but platform power management is not yet available.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20230531122732.1515594-1-amelie.delaunay@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230304133028.2135435-33-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The STM32MP1 RTC may have 2 clocks, the pclk and the rtc_ck.
If clk_prepare_enable() fails for the second clock (rtc_ck) we must only
call clk_disable_unprepare() for the first clock (pclk) but currently we
call it on both leading to a WARN:
[ 15.629568] WARNING: CPU: 0 PID: 146 at drivers/clk/clk.c:958 clk_core_disable+0xb0/0xc8
[ 15.637620] ck_rtc already disabled
[ 15.663322] CPU: 0 PID: 146 Comm: systemd-udevd Not tainted 5.4.77-pknbsp-svn5759-atag-v5.4.77-204-gea4235203137-dirty #2413
[ 15.674510] Hardware name: STM32 (Device Tree Support)
[ 15.679658] [<c0111148>] (unwind_backtrace) from [<c010c0b8>] (show_stack+0x10/0x14)
[ 15.687371] [<c010c0b8>] (show_stack) from [<c0ab3d28>] (dump_stack+0xc0/0xe0)
[ 15.694574] [<c0ab3d28>] (dump_stack) from [<c012360c>] (__warn+0xc8/0xf0)
[ 15.701428] [<c012360c>] (__warn) from [<c0123694>] (warn_slowpath_fmt+0x60/0x94)
[ 15.708894] [<c0123694>] (warn_slowpath_fmt) from [<c053b518>] (clk_core_disable+0xb0/0xc8)
[ 15.717230] [<c053b518>] (clk_core_disable) from [<c053c190>] (clk_core_disable_lock+0x18/0x24)
[ 15.725924] [<c053c190>] (clk_core_disable_lock) from [<bf0adc44>] (stm32_rtc_probe+0x124/0x5e4 [rtc_stm32])
[ 15.735739] [<bf0adc44>] (stm32_rtc_probe [rtc_stm32]) from [<c05f7d4c>] (platform_drv_probe+0x48/0x98)
[ 15.745095] [<c05f7d4c>] (platform_drv_probe) from [<c05f5cec>] (really_probe+0x1f0/0x458)
[ 15.753338] [<c05f5cec>] (really_probe) from [<c05f61c4>] (driver_probe_device+0x70/0x1c4)
[ 15.761584] [<c05f61c4>] (driver_probe_device) from [<c05f6580>] (device_driver_attach+0x58/0x60)
[ 15.770439] [<c05f6580>] (device_driver_attach) from [<c05f6654>] (__driver_attach+0xcc/0x170)
[ 15.779032] [<c05f6654>] (__driver_attach) from [<c05f40d8>] (bus_for_each_dev+0x58/0x7c)
[ 15.787191] [<c05f40d8>] (bus_for_each_dev) from [<c05f4ffc>] (bus_add_driver+0xdc/0x1f8)
[ 15.795352] [<c05f4ffc>] (bus_add_driver) from [<c05f6ed8>] (driver_register+0x7c/0x110)
[ 15.803425] [<c05f6ed8>] (driver_register) from [<c01027bc>] (do_one_initcall+0x70/0x1b8)
[ 15.811588] [<c01027bc>] (do_one_initcall) from [<c01a1094>] (do_init_module+0x58/0x1f8)
[ 15.819660] [<c01a1094>] (do_init_module) from [<c01a0074>] (load_module+0x1e58/0x23c8)
[ 15.827646] [<c01a0074>] (load_module) from [<c01a0860>] (sys_finit_module+0xa0/0xd4)
[ 15.835459] [<c01a0860>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20)
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Cc: stable@vger.kernel.org
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1623087421-19722-1-git-send-email-martin.fuzzey@flowbird.group
