Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
Add support for the resets on Cix's Sky1 SoC.
There are two reset controllers on Cix Sky1 Soc. One is located in S0
domain, and the other is located in S5 domain.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.
Move the existing K1 reset driver into this new directory and rename
it to reset-spacemit-k1.c.
Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default
from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the
clock driver to register reset devices as an auxiliary device, so the
default should reflect this dependency.
Also sort the drivers/reset/Kconfig entries alphabetically.
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.
The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.
The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.
Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...
Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H
SoCs. Instances belong to a shared register region called OLB and gets
spawned as auxiliary device to the platform driver for clock.
There is one OLB instance for EyeQ5 and EyeQ6L. There are seven OLB
instances on EyeQ6H; three have a reset controller embedded:
- West and east get handled by the same compatible.
- Acc (accelerator) is another one.
Each instance vary in the number and types of reset domains.
Instances with single domain expect a single cell, others two.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-2-00b870a6a2ff@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
This driver supports individual IP reset for the MA35D1. The reset
control registers are a subset of the system control registers.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull more ARM SoC updates from Arnd Bergmann:
"These updates came in after I had already tagged the branches, but
they still seem appropriate for 6.0 and most of them were part of
linux-next through other trees.
- The reset controller tree adds one new driver for the TI TPS380x
power management chip and a few minor changes in other drivers
- Apple M1 now has a DT entry for the NVMe controller after the
driver was merged, and has a new mailing list in the MAINTAINERS
file.
- Fixes for USB on the Socionext Uniphier platforms and the network
controller on Intel Cyclone5"
* tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
arm64: dts: apple: t8103: Add ANS2 NVMe nodes
reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage"
reset: tps380x: Add TPS380x device driver supprt
dt-bindings: reset: Add TPS380x documentation
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings
ARM: dts: add EMAC AXI settings for Cyclone5
reset: reset-simple should depends on HAS_IOMEM
Revert "reset: microchip-sparx5: allow building as a module"
reset: a10sr: allow building under COMPILE_TEST
reset: allow building of reset simple driver if expert config selected
reset: microchip-sparx5: allow building as a module
arm64: dts: apple: Re-parent ANS2 power domains
MAINTAINERS: add ARM/APPLE MACHINE mailing list
