Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
Add two new members to the power_supply_usb_type to represent the
USB Power Delivery (PD) Standard Power Range (SPR) Adjustable Voltage
Supply (AVS) charging types:
POWER_SUPPLY_USB_TYPE_PD_SPR_AVS: For devices supporting only the
PD SPR AVS type.
POWER_SUPPLY_USB_TYPE_PD_PPS_SPR_AVS: For devices that support both
PD Programmable Power Supply (PPS) and PD SPR AVS.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260316150301.3892223-3-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the driver probe function by using
devm_alloc_ordered_workqueue() which handles the cleanup already.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply data (power_supply_changed()) status, thus
there is no point to run it for memory reclaim. Note that dev_name() is
not directly used in second argument to prevent possible unlikely
parsing any "%" character in device name as format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305-workqueue-devm-v2-5-66a38741c652@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format.
Fixes: 11741b8e38 ("power: supply: max77705: Fix workqueue error handling in probe")
Fixes: a6a494c8e3 ("power: supply: max77705: Add charger driver for Maxim 77705")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305-workqueue-devm-v2-4-66a38741c652@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Driver initializes delayed work and then registers interrupt handler
with devm interface. This means that device removal will not use a
reversed order, but first cancel pending work items and then, via devm
release handlers, free the interrupt.
The interrupt handler does not directly use/schedule work
items on the workqueue, however it updates the status of the battery
charger which might lead to calling power_supply_changed() and trigger
chain of calls leading to scheduling the work items. If this happens
during short time window after cancel_delayed_work_sync() in remove()
callback, the work would be rescheduled.
Avoid this by using devm interface to initialize and cancel work item,
thus having exactly reverse order during remove() in respect to rest of
the probe/cleanup paths. This is also more logical and readable code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220174938.672883-7-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The Maxim MAX77759 is a companion PMIC intended for use in mobile
phones and tablets. It is used on Google Pixel 6 and 6 Pro (oriole and
raven). Amongst others, it contains a fuel gauge that is similar to the
ones supported by this driver.
The fuel gauge can measure battery charge and discharge current,
battery voltage, battery temperature, and the Type C connector's
temperature.
The MAX77759 incorporates the Maxim ModelGauge m5 algorithm. It, as
well as previous generations like m3 on max17047/max17050, requires
the host to save/restore some register values across power cycles to
maintain full accuracy. Extending the driver for such support is out of
scope in this initial commit.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-9-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
shunt-resistor-micro-ohms is a standard property used to describe the
value of a shunt resistor required when measuring currents. Standard
properties should be used instead of vendor-specific ones of similar
intention when possible.
Try to read it from DT, and fall back to the vendor-specific property
maxim,rsns-microohm if unsuccessful for compatibility with existing
DTs.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-8-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
