In scpsys_get_bus_protection_legacy(), of_find_node_with_property()
returns a device node with its reference count incremented. The function
then calls of_node_put(node) before checking whether
syscon_regmap_lookup_by_phandle() returns an error. If an error occurs,
dev_err_probe() dereferences the node pointer to print diagnostic
information, but the node memory may have already been freed due to the
earlier of_node_put(), leading to a use-after-free vulnerability.
Fix this by moving the of_node_put() call after the error check, ensuring
the node is still valid when accessed in the error path.
Fixes: c29345fa5f ("pmdomain: mediatek: Refactor bus protection regmaps retrieval")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(),
genpd calls pm_runtime_enable() for the corresponding virtual device that
it registers. While this avoids boilerplate code in drivers, there is no
corresponding call to pm_runtime_disable() in genpd_dev_pm_detach().
This means these virtual devices are typically detached from its genpd,
while runtime PM remains enabled for them, which is not how things are
designed to work. In worst cases it may lead to critical errors, like a
NULL pointer dereference bug in genpd_runtime_suspend(), which was recently
reported. For another case, we may end up keeping an unnecessary vote for a
performance state for the device.
To fix these problems, let's add this missing call to pm_runtime_disable()
in genpd_dev_pm_detach().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWapT40hV3c+CSBqFOW05aWcV1a6v_NiJYgoYi0i9_PDQ@mail.gmail.com/
Fixes: 3c095f32a9 ("PM / Domains: Add support for multi PM domains per device to genpd")
Cc: stable@vger.kernel.org
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Allows the buildbots to build the driver on other platforms. There's
nothing special arch specific thing going on here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v7.0-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Allwinner A733 PCK600, similar to A523 PCK600, is likely a
customized version of ARM PCK-600 power controller. It shares the same
BSP driver with A523. According to the BSP provided by Radxa, unlike
A523, it doesn't require reset, as well as a different pair of delay
values.
Make reset optional in the sunxi pck600 driver and add support
for A733.
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org> # matched against BSP driver
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It can be discussed how useful a print is after a successful probe. In the
SCMI power domain case it's seems valuable, as it let us inform about the
number of initialized power domains too, which is fetched from firmware.
Therefore, let's add a print about this, which also aligns with the
behaviour of the SCMI perf domain driver.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@kernel.org>
Change the dev_err() to dev_err_probe() under rockchip_pd_power_on()
to prevent errors early in the boot process when the requested
regulator is not yet available. This converts errors like the following
to debug messages:
rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to enable supply: -517
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Introduce a new power domain (pmd) driver for the MediaTek mt8189 SoC.
This driver ports and refines the power domain framework, dividing
hardware blocks (CPU, GPU, peripherals, etc.) into independent power
domains for precise and energy-efficient power management.
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To allow user space to monitor the selection of the domain idle state
during s2idle for a CPU PM domain, let's extend the debugfs support in
genpd with this information.
Suggested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Similar to how cpuidle provides the values for latency and residency for
CPU's idle states through sysfs, let's make the corresponding data for PM
domain's idle states available for user space, via genpd's debugfs support.
Suggested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To prepare for additional information to be added for the domain idle
states in genpd's debugfs, let's make the existing information denser. To
allow that, let's move the static information of the domain idle states
into a separate debugfs file.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In imx_sc_pd_get_console_rsrc(), it does not release the reference.
Fixes: 893cfb9973 ("firmware: imx: scu-pd: do not power off console domain")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In omap_prm_domain_attach_dev, it does not release the reference.
Fixes: 58cbff023b ("soc: ti: omap-prm: Add basic power domain support")
Signed-off-by: Felix Gu <gu_0233@qq.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the Audio power domain of the MT7622 SoC to the legacy
mtk-scpsys driver (as this legacy SoC is supported only there).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For devices capable of out-of-band system wakeups via I/O daisy chaining,
prevent sending wakeup constraints to the PM co-processor. This allows
the system to enter deeper low power modes, as the device is not marked
as requiring power.
Replaces the logic from commit b06bc47279 ("pmdomain: ti_sci: handle
wake IRQs for IO daisy chain wakeups") since checking out-of-band wakeup
will cover the same functionality.
Detect out-of-band wakeup in the suspend path, and if it exists, skip
sending the constraint.
Signed-off-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Implement nvmem-provider functionality in mtk-mfg-pmdomain, such that it
can expose its GF_REG_SHADER_PRESENT value in the shared memory as an
nvmem cell for panthor.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Define power domain which needs to be enabled in order for audio to work
on the PXA1908-based samsung,coreprimevelte smartphone. In the
downstream code, this power-on method is marked as specific to the ULCx
series which is allegedly a codename of sorts with ULC1 corresponding to
the PXA1908.
No other audio components needed for sound to work on this phone are
currently available mainline but some successful testing was performed
with the vendor variants of the respective drivers and with the domain
forced always-on.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This particular block can have DT subnodes describing the LVDS LDB, MIPI
DSI and parallel DPI bridge.
Scan for possible sub-devices within the driver, instead of misusing the
simple-bus to perform the scan.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Wentao LiangandUlf Hansson
Fenglin WuandUlf Hansson
Rosen PenevandUlf Hansson
Maíra CanalandUlf Hansson
Yuanshen CaoandUlf Hansson
Abel VesaandUlf Hansson
Chris MorganandUlf Hansson
Irving-CH LinandUlf Hansson
Gabor JuhosandUlf Hansson
Felix GuandUlf Hansson
Felix GuandUlf Hansson
AngeloGioacchino Del RegnoandUlf Hansson
Krzysztof KozlowskiandUlf Hansson
Kendall WillisandUlf Hansson
Nicolas FrattaroliandUlf Hansson
Karel BalejandUlf Hansson
Marco FelschandUlf Hansson