mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
master
332
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  Ilpo JärvinenandBjorn Helgaas
|
8cb0816673 |
PCI: Fix alignment calculation for resource size larger than align
The commit |
||
|
Ilpo JärvinenandBjorn Helgaas
|
8bbe8cec89 |
PCI: Rename window_alignment() to pci_min_window_alignment()
window_alignment() lacks prefix. Rename it to pci_min_window_alignment() in order to include the prefix and also add min to indicate the returned window alignment is the minimum PCI spec and arch allows. Also make it available in drivers/pci/pci.h as upcoming changes will need to call it from outside of setup-bus.c. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Xifer <xiferdev@gmail.com> Link: https://patch.msgid.link/20260324165633.4583-9-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
1ee4716a5a |
PCI: Fix premature removal from realloc_head list during resource assignment
reassign_resources_sorted() checks for two things:
a) Resource assignment failures for mandatory resources by checking if the
resource remains unassigned, which are known to always repeat, and does
not attempt to assign them again.
b) That resource is not among the ones being processed/assigned at this
stage, leading to skip processing such resources in
reassign_resources_sorted() as well (resource assignment progresses
one PCI hierarchy level at a time).
The problem here is that a) is checked before b), but b) also implies the
resource is not being assigned yet, making also a) true. As a) only skips
resource assignment but still removes the resource from realloc_head, the
later stages that would need to process the information in realloc_head
cannot obtain the optional size information anymore. This leads to
considering only non-optional part for bridge windows deeper in the PCI
hierarchy.
This problem has been observed during rescan (add_size is not considered
while attempting assignment for 0000:e2:00.0 indicating the corresponding
entry was removed from realloc_head while processing resource assignments
for 0000:e1):
pci_bus 0000:e1: scanning bus
...
pci 0000:e3:01.0: bridge window [mem 0x800000000-0x1000ffffff 64bit pref] to [bus e4] add_size 60c000000 add_align 800000000
pci 0000:e3:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus e4] add_size 200000 add_align 200000
pci 0000:e3:02.0: disabling bridge window [mem 0x00000000-0x000fffff 64bit pref] to [bus e5] (unused)
pci 0000:e2:00.0: bridge window [mem 0x800000000-0x1000ffffff 64bit pref] to [bus e3-e5] add_size 60c000000 add_align 800000000
pci 0000:e2:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus e3-e5] add_size 200000 add_align 200000
pcieport 0000:e1:02.0: bridge window [io size 0x2000]: can't assign; no space
pcieport 0000:e1:02.0: bridge window [io size 0x2000]: failed to assign
pcieport 0000:e1:02.0: bridge window [io 0x1000-0x2fff]: resource restored
pcieport 0000:e1:02.0: bridge window [io 0x1000-0x2fff]: resource restored
pcieport 0000:e1:02.0: bridge window [io size 0x2000]: can't assign; no space
pcieport 0000:e1:02.0: bridge window [io size 0x2000]: failed to assign
pci 0000:e2:00.0: bridge window [mem 0x28f000000000-0x28f800ffffff 64bit pref]: assigned
Fixes:
|
||
|
Ilpo JärvinenandBjorn Helgaas
|
dc4b4d04e1 |
PCI: Prevent shrinking bridge window from its required size
Steve reported an eGPU (either Radeon Instinct MI50 32GB or NVIDIA 3080 10GB) connected via Thunderbolt was not assigned sufficient BAR space in v6.11, so the amdgpu and nvidia drivers were unable to initialize the device. pci_bridge_distribute_available_resources() -> ... -> adjust_bridge_window() is called between __pci_bus_size_bridges() and assigning the resources. Since the commit |
||
 Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
 Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Ilpo JärvinenandBjorn Helgaas
|
a3b93b4223 |
PCI: Account fully optional bridge windows correctly
pbus_size_mem_optional() adds dev_res->add_size of a bridge window into
children_add_size when the window has a non-optional part. However, if the
bridge window is fully optional, only r_size is added (which is zero for
such a window).
Also, a second dev_res entry will be added by pci_dev_res_add_to_list()
into realloc_head for the bridge window (resulting in triggering the
realloc_head-must-be-fully-consumed sanity check after a single pass of the
resource assignment algorithm):
WARNING: drivers/pci/setup-bus.c:2153 at pci_assign_unassigned_root_bus_resources+0xa5/0x260
Correct these problems by always adding dev_res->add_size for bridge
windows and not calling pci_dev_res_add_to_list() if the dev_res entry
exists.
Fixes:
|
||
 Kai-Heng FengandBjorn Helgaas
|
e5f72cb9ce |
PCI: Validate window resource type in pbus_select_window_for_type()
After |
||
|
Linus Torvalds
|
1c2b4a4c2b |
Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
||
|
Ilpo JärvinenandBjorn Helgaas
|
2ecc1bf14e |
PCI: Don't claim disabled bridge windows
The commit |
||
|
Ilpo JärvinenandBjorn Helgaas
|
fd29d4ea09 |
PCI: Separate CardBus setup & build it only with CONFIG_CARDBUS
PCI bridge window setup code includes special code to handle CardBus bridges. CardBus has long since fallen out of favor and modern systems have no use for it. Move CardBus setup code to its own file and use existing CONFIG_CARDBUS to decide whether it should be built or not. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-18-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
b398665a5b |
PCI: Add 'pci' prefix to struct pci_dev_resource handling functions
setup-bus.c has static functions for handling struct pci_dev_resource related operation which have no prefixes. Add 'pci' prefixes to those function names as add_to_list() will be needed in another file by an upcoming change. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-17-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
1a5de84c3a |
PCI: Use resource_assigned() in setup-bus.c algorithm
Many places in the resource fitting and assignment algorithm want to know if the resource is assigned into the resource tree or not. Convert open-coded ->parent checks to use resource_assigned(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-16-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
6a5e64c75e |
PCI: Add pbus_mem_size_optional() to handle optional sizes
The resource loop in pbus_size_mem() handles optional resources that are either fully optional (SR-IOV and disabled Expansion ROMs) or bridge windows that may be optional only for a part. The logic is a little inconsistent when it comes to a bridge window that has only optional children resources as it would be more natural to treat it similar to any fully optional resource. As resource size should be zero in that case, it shouldn't cause any bugs but it still seems useful to address the inconsistency. Place the optional size related code of pbus_size_mem() into pbus_mem_size_optional() and add a check in pci_resource_is_optional() for entirely optional bridge windows. Reorder the logic inside pbus_mem_size_optional() such that fully optional resources are handled the same irrespective of whether the resource is a bridge window or not. Additional motivation for this are the upcoming changes that add complexity to the optional sizing logic due to Resizable BAR awareness. The extra logic would exceed any reasonable indentation level if the optional sizing code is kept within the loop body. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-14-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
c10fe0c0e6 |
PCI: Check invalid align earlier in pbus_size_mem()
Check for invalid align before any bridge window sizing actions in pbus_size_mem() to avoid need to roll back any sizing calculations. Placing the check earlier will make it easier to add more optional size related calculations at where the SR-IOV logic currently is in pbus_size_mem(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-13-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
9629f71722 |
PCI: Log reset and restore of resources
PCI resource fitting and assignment is complicated to track because it performs many actions without any logging. One of these is resource reset (zeroing the resource) and the restore during the multi-pass resource fitting algorithm. Resource reset does not play well with the other PCI code if the code later wants to reattempt assignment of that resource. Knowing that a resource was left in the reset state without a pairing restore is useful for understanding issues that show up as resource assignment failures. Add pci_dbg() to both reset and restore to be better able to track what's going on within the resource fitting algorithm. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-12-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
5fa2f9fb34 |
PCI: Add pci_resource_is_bridge_win()
Add pci_resource_is_bridge_win() helper to simplify checking if the resource is a bridge window. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-11-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
e112fbb26b |
PCI: Fetch dev_res to local var in __assign_resources_sorted()
__assign_resources_sorted() calls get_res_add_size() and get_res_add_align(), each walking through the realloc_head list to relocate the corresponding pci_dev_resource entry. Fetch the pci_dev_resource entry into a local variable to avoid double walk. In addition, reverse logic to reduce indentation level. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-10-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
4bee4fc0f4 |
PCI: Use res_to_dev_res() in reassign_resources_sorted()
reassign_resources_sorted() contains a search loop for a particular resource in the head list. res_to_dev_res() already implements the same search so use it instead. Drop unused found_match and dev_res variables. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-9-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
5819403a0e |
PCI: Pass bridge window resource to pbus_size_mem()
pbus_size_mem() inputs type and calculates bridge window resource within. Its caller (__pci_bus_size_bridges()) also has to look up the prefetchable window to determine if it exists or not to decide whether to call pbus_size_mem() twice or once. Change the interface such that the caller is responsible in providing the bridge window resource. Passing the resource directly avoids another lookup for the prefetchable window inside pbus_size_mem(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251219174036.16738-8-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
d0c72d6e39 |
PCI: Push realloc check into pbus_size_mem()
pbus_size_mem() and calculate_memsize() input both min_size and add_size.
They are given the same value if realloc_head is NULL and min_size is 0
otherwise. Both are used in calculate_memsize() to enforce a lower bound to
the size.
The interface between __pci_bus_size_bridges() and the forementioned
functions can be simplied by pushing the realloc check into
pbus_size_mem().
There are only two possible cases:
1) when calculating size0, add_size parameter given to
calculate_memsize() is always 0 which implies only min_size
matters.
2) when calculating size1, realloc_head is not NULL which implies
min_size=0 so only add_size matters.
Drop min_size parameter from pbus_size_mem() and check realloc_head when
calling calculate_memsize(). Drop add_size from calculate_memsize() and use
only min_size within max() to enforce the lower bound.
calculate_iosize() is a bit more complicated than calculate_memsize() and
is therefore left as is, but pbus_size_io() can still input only min_size
similar to pbus_size_mem().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251219174036.16738-7-ilpo.jarvinen@linux.intel.com
|
||
|
Ilpo JärvinenandBjorn Helgaas
|
f909e3ee3e |
PCI: Remove old_size limit from bridge window sizing
calculate_memsize() applies lower bound to the resource size before aligning the resource size making it impossible to shrink bridge window resources. I've not found any justification for this lower bound and nothing indicated it was to work around some HW issue. Prior to the commit |
||
|
Ilpo JärvinenandBjorn Helgaas
|
3958bf16e2 |
PCI: Stop over-estimating bridge window size
New way to calculate the bridge window head alignment produces tight-fit, that is, it does not leave any gaps between the resources. Similarly, relaxed tail alignment does not leave extra tail room. Start to use bridge window calculation that does not over-estimate the size of the required window. pbus_upstream_space_available() can be removed. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Malte Schröder <malte+lkml@tnxip.de> Link: https://patch.msgid.link/20251219174036.16738-4-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
bc75c8e507 |
PCI: Rewrite bridge window head alignment function
The calculation of bridge window head alignment is done by
calculate_mem_align() [*]. With the default bridge window alignment, it
is used for both head and tail alignment.
The selected head alignment does not always result in tight-fitting
resources (gap at d4f00000-d4ffffff):
d4800000-dbffffff : PCI Bus 0000:06
d4800000-d48fffff : PCI Bus 0000:07
d4800000-d4803fff : 0000:07:00.0
d4800000-d4803fff : nvme
d4900000-d49fffff : PCI Bus 0000:0a
d4900000-d490ffff : 0000:0a:00.0
d4900000-d490ffff : r8169
d4910000-d4913fff : 0000:0a:00.0
d4a00000-d4cfffff : PCI Bus 0000:0b
d4a00000-d4bfffff : 0000:0b:00.0
d4a00000-d4bfffff : 0000:0b:00.0
d4c00000-d4c07fff : 0000:0b:00.0
d4d00000-d4dfffff : PCI Bus 0000:15
d4d00000-d4d07fff : 0000:15:00.0
d4d00000-d4d07fff : xhci-hcd
d4e00000-d4efffff : PCI Bus 0000:16
d4e00000-d4e7ffff : 0000:16:00.0
d4e80000-d4e803ff : 0000:16:00.0
d4e80000-d4e803ff : ahci
d5000000-dbffffff : PCI Bus 0000:0c
This has not caused problems (for years) with the default bridge window
tail alignment that grossly over-estimates the required tail alignment
leaving more tail room than necessary. With the introduction of relaxed
tail alignment that leaves no extra tail room whatsoever, any gaps will
immediately turn into assignment failures.
Introduce head alignment calculation that ensures no gaps are left and
apply the new approach when using relaxed alignment. We may want to
consider using it for the normal alignment eventually, but as the first
step, solve only the problem with the relaxed tail alignment.
([*] I don't understand the algorithm in calculate_mem_align().)
Link: https://git.kernel.org/history/history/c/5d0a8965aea9 ("[PATCH] 2.5.14: New PCI allocation code (alpha, arm, parisc) [2/2]")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220775
Reported-by: Malte Schröder <malte+lkml@tnxip.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Malte Schröder <malte+lkml@tnxip.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251219174036.16738-3-ilpo.jarvinen@linux.intel.com
|
||
|
Ilpo JärvinenandBjorn Helgaas
|
7e90360e6d |
PCI: Fix bridge window alignment with optional resources
pbus_size_mem() has two alignments, one for required resources in min_align
and another in add_align that takes account optional resources.
The add_align is applied to the bridge window through the realloc_head
list. It can happen, however, that add_align is larger than min_align but
calculated size1 and size0 are equal due to extra tailroom (e.g., hotplug
reservation, tail alignment), and therefore no entry is created to the
realloc_head list. Without the bridge appearing in the realloc head,
add_align is lost when pbus_size_mem() returns.
The problem is visible in this log for 0000:05:00.0 which lacks
add_size ... add_align ... line that would indicate it was added into
the realloc_head list:
pci 0000:05:00.0: PCI bridge to [bus 06-16]
...
pci 0000:06:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 07] requires relaxed alignment rules
pci 0000:06:06.0: bridge window [mem 0x00100000-0x001fffff] to [bus 0a] requires relaxed alignment rules
pci 0000:06:07.0: bridge window [mem 0x00100000-0x003fffff] to [bus 0b] requires relaxed alignment rules
pci 0000:06:08.0: bridge window [mem 0x00800000-0x00ffffff 64bit pref] to [bus 0c-14] requires relaxed alignment rules
pci 0000:06:08.0: bridge window [mem 0x01000000-0x057fffff] to [bus 0c-14] requires relaxed alignment rules
pci 0000:06:08.0: bridge window [mem 0x01000000-0x057fffff] to [bus 0c-14] requires relaxed alignment rules
pci 0000:06:08.0: bridge window [mem 0x01000000-0x057fffff] to [bus 0c-14] add_size 100000 add_align 1000000
pci 0000:06:0c.0: bridge window [mem 0x00100000-0x001fffff] to [bus 15] requires relaxed alignment rules
pci 0000:06:0d.0: bridge window [mem 0x00100000-0x001fffff] to [bus 16] requires relaxed alignment rules
pci 0000:06:0d.0: bridge window [mem 0x00100000-0x001fffff] to [bus 16] requires relaxed alignment rules
pci 0000:05:00.0: bridge window [mem 0xd4800000-0xd97fffff]: assigned
pci 0000:05:00.0: bridge window [mem 0x1060000000-0x10607fffff 64bit pref]: assigned
pci 0000:06:08.0: bridge window [mem size 0x04900000]: can't assign; no space
pci 0000:06:08.0: bridge window [mem size 0x04900000]: failed to assign
While this bug itself seems old, it has likely become more visible after
the relaxed tail alignment that does not grossly overestimate the size
needed for the bridge window.
Make sure add_align > min_align too results in adding an entry into the
realloc head list. In addition, add handling to the cases where add_size is
zero while only alignment differs.
Fixes:
|