- Update slot handling so all ARI functions are treated as being in the
same slot. They're all reset by Secondary Bus Reset, but previously
drivers of ARI functions that appeared to be on a non-zero device weren't
notified and fatal hardware errors could result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Consolidate bus iteration across the _lock(), _unlock(), and _trylock()
functions for pci_bus and pci_slot (Ilpo Järvinen)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked by
CXL because it has no effect (Vidya Sagar)
* pci/reset:
PCI/CXL: Hide SBR from reset_methods if masked by CXL
PCI: Consolidate pci_bus/slot_lock/unlock/trylock()
PCI: Make reset_subordinate hotplug safe
PCI: Allow all bus devices to use the same slot
PCI: Rename __pci_bus_reset() and __pci_slot_reset()
A PCIe hotplug slot applies to the entire secondary bus. Thus, pciehp only
allocates a single hotplug_slot for the bridge to that bus. The existing
PCI slot, though, would only match to functions on device 0, meaning any
devices beyond that, e.g., ARI functions, are not matched to any slot even
though they share it. A slot reset will break all the missing devices
because the handling skips them.
For example, ARI devices with more than 8 functions fail because their
state is not properly handled, nor is the attached driver notified of the
reset. In the best case, the device will appear unresponsive to the driver,
resulting in unexpected errors. A worse possibility may panic the kernel if
in-flight transactions trigger hardware reported errors like this real
observation:
vfio-pci 0000:01:00.0: resetting
vfio-pci 0000:01:00.0: reset done
{1}[Hardware Error]: Error 1, type: fatal
{1}[Hardware Error]: section_type: PCIe error
{1}[Hardware Error]: port_type: 0, PCIe end point
{1}[Hardware Error]: version: 0.2
{1}[Hardware Error]: command: 0x0140, status: 0x0010
{1}[Hardware Error]: device_id: 0000:01:01.0
{1}[Hardware Error]: slot: 0
{1}[Hardware Error]: secondary_bus: 0x00
{1}[Hardware Error]: vendor_id: 0x1d9b, device_id: 0x0207
{1}[Hardware Error]: class_code: 020000
{1}[Hardware Error]: bridge: secondary_status: 0x0000, control: 0x0000
{1}[Hardware Error]: aer_cor_status: 0x00008000, aer_cor_mask: 0x00002000
{1}[Hardware Error]: aer_uncor_status: 0x00010000, aer_uncor_mask: 0x00100000
{1}[Hardware Error]: aer_uncor_severity: 0x006f6030
{1}[Hardware Error]: TLP Header: 0a412800 00192080 60000004 00000004
GHES: Fatal hardware error but panic disabled
Kernel panic - not syncing: GHES: Fatal hardware error
Allow a slot to be created to claim all devices on a bus, not just a
matching device. This is done by introducing a sentinel value, named
PCI_SLOT_ALL_DEVICES, which then has the PCI slot match to any device on
the bus. This fixes slot resets for pciehp.
Since 0xff already has special meaning, the chosen value for this new
feature is 0xfe. This will not clash with any actual slot number since they
are limited to 5 bits.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260217160836.2709885-3-kbusch@meta.com
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
- Add WQ_PERCPU to alloc_workqueue() users (Marco Crivellari)
- Replace use of system_wq with system_percpu_wq (Marco Crivellari)
- Check for failure of alloc_workqueue() to avoid NULL pointer dereferences
(Haotian Zhang)
* pci/workqueue:
PCI: endpoint: Add missing NULL check for alloc_workqueue()
PCI: endpoint: Replace use of system_wq with system_percpu_wq
PCI: Add WQ_PERCPU to alloc_workqueue() users
# Conflicts:
# drivers/pci/endpoint/pci-ep-cfs.c
Currently work items enqueued by schedule_delayed_work() use "system_wq" (a
per-CPU wq), while queue_delayed_work() uses WORK_CPU_UNBOUND (used when a
CPU is not specified). The same applies to schedule_work() that is using
system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This
lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they're needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with the
introduction of new workqueues and a new alloc_workqueue() flag in:
128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Add WQ_PERCPU to explicitly request alloc_workqueue() to be per-CPU when
WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn't explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
[bhelgaas: squash similar commits]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251107142526.234685-1-marco.crivellari@suse.com
Link: https://patch.msgid.link/20251107142835.237636-1-marco.crivellari@suse.com
Link: https://patch.msgid.link/20251107143108.240025-1-marco.crivellari@suse.com
Link: https://patch.msgid.link/20251107143335.242342-1-marco.crivellari@suse.com
Link: https://patch.msgid.link/20251107143624.244978-1-marco.crivellari@suse.com
PCIe link speed degradation directly impacts system performance and often
indicates hardware issues such as faulty devices, physical layer problems,
or configuration errors.
To this end, add a RAS tracepoint to monitor link speed changes, enabling
proactive health checks and diagnostic analysis.
The following output is generated when a device is hotplugged:
$ echo 1 > /sys/kernel/debug/tracing/events/pci/pcie_link_event/enable
$ cat /sys/kernel/debug/tracing/trace_pipe
irq/51-pciehp-88 [001] ..... 381.545386: pcie_link_event: 0000:00:02.0 type:4, reason:4, cur_bus_speed:20, max_bus_speed:23, width:1, flit_mode:0, status:DLLLA
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Matthew W Carlis <mattc@purestorage.com>
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251210132907.58799-3-xueshuai@linux.alibaba.com
Hotplug events are critical indicators for analyzing hardware health, and
surprise link downs can significantly impact system performance and
reliability.
Define a new TRACING_SYSTEM named "pci", add a generic RAS tracepoint
for hotplug event to help health checks. Add enum pci_hotplug_event in
include/uapi/linux/pci.h so applications like rasdaemon can register
tracepoint event handlers for it.
The following output is generated when a device is hotplugged:
$ echo 1 > /sys/kernel/debug/tracing/events/pci/pci_hp_event/enable
$ cat /sys/kernel/debug/tracing/trace_pipe
irq/51-pciehp-88 [001] ..... 1311.177459: pci_hp_event: 0000:00:02.0 slot:10, event:CARD_PRESENT
irq/51-pciehp-88 [001] ..... 1311.177566: pci_hp_event: 0000:00:02.0 slot:10, event:LINK_UP
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for trace event
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251210132907.58799-2-xueshuai@linux.alibaba.com
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel
message catalog" which never made it upstream.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In almost all cases this leads to a
simple replacement like this:
- #define KMSG_COMPONENT "appldata"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "appldata: " fmt
Except for some special cases this is just mechanical/scripted work.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Pull powerpc fixes from Madhavan Srinivasan:
- Fixes for several issues in the powernv PCI hotplug path
- Fix htmldoc generation for htm.rst in toctree
- Add jit support for load_acquire and store_release in ppc64 bpf jit
Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar
Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar
* tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc64/bpf: Add jit support for load_acquire and store_release
docs: powerpc: add htm.rst to toctree
PCI: pnv_php: Enable third attention indicator state
PCI: pnv_php: Fix surprise plug detection and recovery
powerpc/eeh: Make EEH driver device hotplug safe
powerpc/eeh: Export eeh_unfreeze_pe()
PCI: pnv_php: Work around switches with broken presence detection
PCI: pnv_php: Clean up allocated IRQs on unplug
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
The PCIe hotplug driver calculates the depth of a nested hotplug port by
looking at the is_hotplug_bridge flag. The depth is used as lockdep class
to tell hotplug ports apart.
The is_hotplug_bridge flag encompasses ACPI slots handled by the ACPI
hotplug driver, hence the calculated depth may be too high. Avoid by
checking the is_pciehp flag instead.
This glitch likely has no user-visible impact: ACPI slots typically only
exist at the Root Port level, not in nested hotplug hierarchies. Also,
CONFIG_LOCKDEP is usually only used by developers. So this is just for
the sake of correctness.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/59a097376a2bb493da9efd66fb196ae4b66f8a09.1752390102.git.lukas@wunner.de
The PCIe specification allows three attention indicator states, on, off,
and blink. Enable all three states instead of basic on / off control.
This changes the userspace API (writes to the sysfs "attention" file) to
match the behavior of pciehp. Here's the comparison of previous and new
indicator behavior:
Value Previous New Behavior
----- -------- ------------------------
0 off (reserved, so undefined)
1 on on
2 on blink
3 on off
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: add specifics of behavior change]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1210309411.1359866.1752615582001.JavaMail.zimbra@raptorengineeringinc.com
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.
Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/505981576.1359853.1752615415117.JavaMail.zimbra@raptorengineeringinc.com
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
Call Trace:
msi_device_data_release+0x34/0x9c (unreliable)
release_nodes+0x64/0x13c
devres_release_all+0xc0/0x140
device_del+0x2d4/0x46c
pci_destroy_dev+0x5c/0x194
pci_hp_remove_devices+0x90/0x128
pci_hp_remove_devices+0x44/0x128
pnv_php_disable_slot+0x54/0xd4
power_write_file+0xf8/0x18c
pci_slot_attr_store+0x40/0x5c
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x3bc/0x50c
ksys_write+0x84/0x140
system_call_exception+0x124/0x230
system_call_vectored_common+0x15c/0x2ec
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c3be50f754 ("PCI: pciehp: Ignore Presence Detect Changed caused by
DPC") sought to ignore Presence Detect Changed events occurring as a side
effect of Downstream Port Containment.
The commit awaits recovery from DPC and then clears events which occurred
in the meantime. However if the first event seen after DPC is Data Link
Layer State Changed, only that event is cleared and not Presence Detect
Changed. The object of the commit is thus defeated.
That's because pciehp_ist() computes the events to clear based on the local
"events" variable instead of "ctrl->pending_events". The former contains
the events that had occurred when pciehp_ist() was entered, whereas the
latter also contains events that have accumulated while awaiting DPC
recovery.
In practice, the order of PDC and DLLSC events is arbitrary and the delay
in-between can be several milliseconds.
So change the logic to always clear PDC events, even if they come after an
initial DLLSC event.
Fixes: c3be50f754 ("PCI: pciehp: Ignore Presence Detect Changed caused by DPC")
Reported-by: Lương Việt Hoàng <tcm4095@gmail.com>
Reported-by: Joel Mathew Thomas <proxy0@tutamail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219765#c165
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Lương Việt Hoàng <tcm4095@gmail.com>
Tested-by: Joel Mathew Thomas <proxy0@tutamail.com>
Link: https://patch.msgid.link/d9c4286a16253af7e93eaf12e076e3ef3546367a.1750257164.git.lukas@wunner.de
