of_count_phandle_with_args() returns the count on success and a negative
errno on failure, including -ENOENT when the "pairsets" property is
absent. The existing comparison in of_load_pse_pis() checks against
ENOENT (positive 2) instead of -ENOENT, so the branch is taken for any
error return: legitimate DTs that omit "pairsets" trigger a spurious
"wrong number of pairsets" error and probe fails with -EINVAL.
Compare against -ENOENT so a missing "pairsets" property is correctly
treated as "this PI has no pairsets, continue".
Fixes: 9be9567a7c ("net: pse-pd: Add support for PSE PIs")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260515143103.1721888-1-jelonek.jonas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In pse_isr(), notifs_mask was declared as a single unsigned long on the
stack (32 bits on 32-bit architectures). For PSE controllers with more
than 32 ports, this causes two problems:
- map_event callbacks could wrote bit positions >= 32 via
*notifs_mask |= BIT(i), which is undefined behaviour on a 32-bit
unsigned long and corrupts adjacent stack memory.
- for_each_set_bit(i, ¬ifs_mask, pcdev->nr_lines) treats
¬ifs_mask as a multi-word bitmap and reads beyond the single
unsigned long when nr_lines > BITS_PER_LONG.
Fix this by moving notifs_mask out of the stack and into struct pse_irq
as a dynamically allocated bitmap. It is sized with
BITS_TO_LONGS(pcdev->nr_lines) words in devm_pse_irq_helper(), so it
is always wide enough regardless of the host word size.
[Jakub]: No upstream driver currently supports >=32 ports.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260415130300.806152-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The TPS23881B uses different firmware than the TPS23881. Trying to load the
TPS23881 firmware on a TPS23881B device fails and must be omitted.
The TPS23881B ships with a more recent ROM firmware. Moreover, no updated
firmware has been released yet and so the firmware loading step must be
skipped. As of today, the TPS23881B is intended to use its ROM firmware.
Signed-off-by: Thomas Wismer <thomas.wismer@scs.ch>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251029212312.108749-2-thomas@wismer.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Detect when PSE hardware is already configured (user byte == 42) and
skip hardware initialization to prevent power interruption to connected
devices during system reboots.
Previously, the driver would always reconfigure the PSE hardware on
probe, causing a port matrix reflash that resulted in temporary power
loss to all connected devices. This change maintains power continuity
by preserving existing configuration when the PSE has been previously
initialized.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013-feature_pd692x0_reboot_keep_conf-v2-3-68ab082a93dd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cache the port matrix configuration in driver private data to enable
PSE controller reconfiguration. This refactoring separates device tree
parsing from hardware configuration application, allowing settings to be
reapplied without reparsing the device tree.
This refactoring is a prerequisite for preserving PSE configuration
across reboots to prevent power disruption to connected devices.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013-feature_pd692x0_reboot_keep_conf-v2-2-68ab082a93dd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TPS23881 improves on the TPS23880 with current sense resistors reduced
from 255 mOhm to 200 mOhm. This has a direct impact on the scaling of the
current measurement. However, the latest TPS23881 data sheet from May 2023
still shows the scaling of the TPS23880 model.
Fixes: 7f076ce3f1 ("net: pse-pd: tps23881: Add support for power limit and measurement features")
Signed-off-by: Thomas Wismer <thomas.wismer@scs.ch>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251006204029.7169-2-thomas@wismer.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the power supply's power budget is not defined in the device tree,
the current code still requests power and configures the PSE manager
with a 0W power limit, which is undesirable behavior.
Skip power budget configuration entirely when the budget is zero,
avoiding unnecessary power requests and preventing invalid 0W limits
from being set on the PSE manager.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250820133321.841054-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a resource leak where manager power budgets were freed on both
success and error paths during manager setup. Power budgets should
only be freed on error paths after regulator registration or during
driver removal.
Refactor cleanup logic by extracting OF node cleanup and power budget
freeing into separate helper functions for better maintainability.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250820132708.837255-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pd692x0_manager array in this function is really too big to fit on the
stack, though this never triggered a warning until a recent patch made
it slightly bigger:
drivers/net/pse-pd/pd692x0.c: In function 'pd692x0_setup_pi_matrix':
drivers/net/pse-pd/pd692x0.c:1210:1: error: the frame size of 1584 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Change the function to dynamically allocate the array here.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250709153210.1920125-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enhances PSE callbacks by introducing support for the static
port priority feature. It extends interrupt management to handle and report
detection, classification, and disconnection events. Additionally, it
introduces the pi_get_pw_req() callback, which provides information about
the power requested by the Powered Devices.
Interrupt support is essential for the proper functioning of the TPS23881
controller. Without it, after a power-on (PWON), the controller will
no longer perform detection and classification. This could lead to
potential hazards, such as connecting a non-PoE device after a PoE device,
which might result in magic smoke.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-12-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces the ability to configure the PSE PI budget evaluation
strategies. Budget evaluation strategies is utilized by PSE controllers to
determine which ports to turn off first in scenarios such as power budget
exceedance.
The pis_prio_max value is used to define the maximum priority level
supported by the controller. Both the current priority and the maximum
priority are exposed to the user through the pse_ethtool_get_status call.
This patch add support for two mode of budget evaluation strategies.
1. Static Method:
This method involves distributing power based on PD classification.
It’s straightforward and stable, the PSE core keeping track of the
budget and subtracting the power requested by each PD’s class.
Advantages: Every PD gets its promised power at any time, which
guarantees reliability.
Disadvantages: PD classification steps are large, meaning devices
request much more power than they actually need. As a result, the power
supply may only operate at, say, 50% capacity, which is inefficient and
wastes money.
Priority max value is matching the number of PSE PIs within the PSE.
2. Dynamic Method:
To address the inefficiencies of the static method, vendors like
Microchip have introduced dynamic power budgeting, as seen in the
PD692x0 firmware. This method monitors the current consumption per port
and subtracts it from the available power budget. When the budget is
exceeded, lower-priority ports are shut down.
Advantages: This method optimizes resource utilization, saving costs.
Disadvantages: Low-priority devices may experience instability.
Priority max value is set by the PSE controller driver.
For now, budget evaluation methods are not configurable and cannot be
mixed. They are hardcoded in the PSE driver itself, as no current PSE
controller supports both methods.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-7-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce PSE power domain support as groundwork for upcoming port
priority features. Multiple PSE PIs can now be grouped under a single
PSE power domain, enabling future enhancements like defining available
power budgets, port priority modes, and disconnection policies. This
setup will allow the system to assess whether activating a port would
exceed the available power budget, preventing over-budget states
proactively.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-4-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for reporting PSE events via ethtool notifications,
introduce an attached_phydev field in the pse_control structure.
This field stores the phy_device associated with the PSE PI,
ensuring that notifications are sent to the correct network
interface.
The attached_phydev pointer is directly tied to the PHY lifecycle. It
is set when the PHY is registered and cleared when the PHY is removed.
There is no need to use a refcount, as doing so could interfere with
the PHY removal process.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-1-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
