The origin bio carries blk-cgroup information which could be set from
foreground(task_css(css) - wbc->wb->blkcg_css), so the blkcg won't
control buffer io since commit ca522482e3 ("dm: pass NULL bdev to
bio_alloc_clone"). The synchronous io is still under control by blkcg,
because 'bio->bi_blkg' is set by io submitting task which has been added
into 'cgroup.procs'.
Fix it by using bio_clone_blkg_association when submitting a cloned bio.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220985
Fixes: ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Pull device mapper updates from Mikulas Patocka:
- convert crypto_shash users to direct crypto library use with simpler
and faster code and reduced stack usage (Eric Biggers):
- the dm-verity SHA-256 conversion also teaches it to do two-way
interleaved hashing for added performance
- dm-crypt MD5 conversion (used for Loop-AES compatibility)
- added document for for takeover/reshape raid1 -> raid5 examples (Heinz Mauelshagen)
- fix dm-vdo kerneldoc warnings (Matthew Sakai)
- various random fixes and cleanups
* tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm pcache: fix segment info indexing
dm pcache: fix cache info indexing
dm-pcache: advance slot index before writing slot
dm raid: add documentation for takeover/reshape raid1 -> raid5 table line examples
dm log-writes: Add missing set_freezable() for freezable kthread
dm-raid: fix possible NULL dereference with undefined raid type
dm-snapshot: fix 'scheduling while atomic' on real-time kernels
dm: ignore discard return value
MAINTAINERS: add Benjamin Marzinski as a device mapper maintainer
dm-mpath: Simplify the setup_scsi_dh code
dm vdo: fix kerneldoc warnings
dm-bufio: align write boundary on physical block size
dm-crypt: enable DM_TARGET_ATOMIC_WRITES
dm: test for REQ_ATOMIC in dm_accept_partial_bio()
dm-verity: remove useless mempool
dm-verity: disable recursive forward error correction
dm-ebs: Mark full buffer dirty even on partial write
dm mpath: enable DM_TARGET_ATOMIC_WRITES
dm verity fec: Expose corrected block count via status
dm: Don't warn if IMA_DISABLE_HTABLE is not enabled
...
Any bio with REQ_ATOMIC flag set should never be split or partially
completed, so BUG_ON() on this scenario in dm_accept_partial_bio() (whose
intent is to allow partial completions).
Also, we must reject atomic bio to targets that don't support them,
otherwise this BUG could be triggered by stray bios that have the
REQ_ATOMIC set.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: John Garry <john.g.garry@oracle.com>
An empty flush bio can have arbitrary bi_sector. The commit 2b1c6d7a89
introduced a regression that device mapper would fail an empty flush bio
with -EIO if the sector pointed beyond the end of the device.
The commit introduced an optimization, that optimization would pass
flushes to __split_and_process_bio and __split_and_process_bio is not
prepared to handle empty bios. Fix this bug by passing only non-empty
flushes to __split_and_process_bio - non-empty flushes must have valid
bi_sector. Empty bios will go through __send_empty_flush, as they did
before the optimization.
This problem can be reproduced by running the lvm2 test:
make check_local T=lvconvert-thin.sh LVM_TEST_PREFER_BRD=0
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 2b1c6d7a89 ("dm: optimize REQ_PREFLUSH with data when using the linear target")
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Commit f1cd6cb24b ("dm ima: add a warning in dm_init if duplicate ima
events are not measured") added a warning message if CONFIG_IMA is
enabled but CONFIG_IMA_DISABLE_HTABLE is not to inform users. When
enabling CONFIG_IMA, CONFIG_IMA_DISABLE_HTABLE is disabled by default
and so warning is seen. Therefore, it seems more appropriate to make
this an INFO level message than warning. If this truly is a warning,
then maybe CONFIG_IMA_DISABLE_HTABLE should default to y if CONFIG_IMA
is enabled.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Request-based devices (dm-multipath) queue I/O in blk-mq on noflush
suspends. Any queued IO will make it impossible to freeze the queue. If
a process attempts to update the queue limits while there is queued IO,
it can be get stuck holding the limits lock, while unable to freeze the
queue. If device-mapper then attempts to update the limits during a
table swap, it will deadlock trying to grab the limits lock while making
it impossible to flush the IO.
Disallow updating the queue limits during a table swap, when updating an
immutable request-based dm device (dm-multipath) during a noflush
suspend. It is userspace's responsibility to make sure that the new
table uses the same limits as the existing table if it asks for a
noflush suspend.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Pull device mapper updates from Mikulas Patocka:
- a new dm-pcache target for read/write caching on persistent memory
- fix typos in docs
- misc small refactoring
- mark dm-error with DM_TARGET_PASSES_INTEGRITY
- dm-request-based: fix NULL pointer dereference and quiesce_depth out of sync
- dm-linear: optimize REQ_PREFLUSH
- dm-vdo: return error on corrupted metadata
- dm-integrity: support asynchronous hash interface
* tag 'for-6.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (27 commits)
dm raid: use proper md_ro_state enumerators
dm-integrity: prefer synchronous hash interface
dm-integrity: enable asynchronous hash interface
dm-integrity: rename internal_hash
dm-integrity: add the "offset" argument
dm-integrity: allocate the recalculate buffer with kmalloc
dm-integrity: introduce integrity_kmap and integrity_kunmap
dm-integrity: replace bvec_kmap_local with kmap_local_page
dm-integrity: use internal variable for digestsize
dm vdo: return error on corrupted metadata in start_restoring_volume functions
dm vdo: Update code to use mem_is_zero
dm: optimize REQ_PREFLUSH with data when using the linear target
dm-pcache: use int type to store negative error codes
dm: fix "writen"->"written"
dm-pcache: cleanup: fix coding style report by checkpatch.pl
dm-pcache: remove ctrl_lock for pcache_cache_segment
dm: fix NULL pointer dereference in __dm_suspend()
dm: fix queue start/stop imbalance under suspend/load/resume races
dm-pcache: add persistent cache target in device-mapper
dm error: mark as DM_TARGET_PASSES_INTEGRITY
...
If the table has only linear targets and there is just one underlying
device, we can optimize REQ_PREFLUSH with data - we don't have to split
it to two bios - a flush and a write. We can pass it to the linear target
directly.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
There is a race condition between dm device suspend and table load that
can lead to null pointer dereference. The issue occurs when suspend is
invoked before table load completes:
BUG: kernel NULL pointer dereference, address: 0000000000000054
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50
Call Trace:
<TASK>
blk_mq_quiesce_queue+0x2c/0x50
dm_stop_queue+0xd/0x20
__dm_suspend+0x130/0x330
dm_suspend+0x11a/0x180
dev_suspend+0x27e/0x560
ctl_ioctl+0x4cf/0x850
dm_ctl_ioctl+0xd/0x20
vfs_ioctl+0x1d/0x50
__se_sys_ioctl+0x9b/0xc0
__x64_sys_ioctl+0x19/0x30
x64_sys_call+0x2c4a/0x4620
do_syscall_64+0x9e/0x1b0
The issue can be triggered as below:
T1 T2
dm_suspend table_load
__dm_suspend dm_setup_md_queue
dm_mq_init_request_queue
blk_mq_init_allocated_queue
=> q->mq_ops = set->ops; (1)
dm_stop_queue / dm_wait_for_completion
=> q->tag_set NULL pointer! (2)
=> q->tag_set = set; (3)
Fix this by checking if a valid table (map) exists before performing
request-based suspend and waiting for target I/O. When map is NULL,
skip these table-dependent suspend steps.
Even when map is NULL, no I/O can reach any target because there is
no table loaded; I/O submitted in this state will fail early in the
DM layer. Skipping the table-dependent suspend logic in this case
is safe and avoids NULL pointer dereferences.
Fixes: c4576aed8d ("dm: fix request-based dm's use of dm_wait_for_completion")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When suspend and load run concurrently, before q->mq_ops is set in
blk_mq_init_allocated_queue(), __dm_suspend() skip dm_stop_queue(). As a
result, the queue's quiesce depth is not incremented.
Later, once table load has finished and __dm_resume() runs, which triggers
q->quiesce_depth ==0 warning in blk_mq_unquiesce_queue():
Call Trace:
<TASK>
dm_start_queue+0x16/0x20 [dm_mod]
__dm_resume+0xac/0xb0 [dm_mod]
dm_resume+0x12d/0x150 [dm_mod]
do_resume+0x2c2/0x420 [dm_mod]
dev_suspend+0x30/0x130 [dm_mod]
ctl_ioctl+0x402/0x570 [dm_mod]
dm_ctl_ioctl+0x23/0x30 [dm_mod]
Fix this by explicitly tracking whether the request queue was
stopped in __dm_suspend() via a new DMF_QUEUE_STOPPED flag.
Only call dm_start_queue() in __dm_resume() if the queue was
actually stopped.
Fixes: e70feb8b3e ("blk-mq: support concurrent queue quiesce/unquiesce")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Instances are happier that way and it makes more sense anyway -
the only part of the result that is related to partition we are given
is the start sector, and that has been filled in by the caller.
Everything else is a function of the disk. Only one instance
(DASD) is ever looking at anything other than bdev->bd_disk and
that one is trivial to adjust.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull device mapper updates from Mikulas Patocka:
- fix checking for request-based stackable devices (dm-table)
- fix corrupt_bio_byte setup checks (dm-flakey)
- add support for resync w/o metadata devices (dm raid)
- small code simplification (dm, dm-mpath, vm-vdo, dm-raid)
- remove support for asynchronous hashes (dm-verity)
- close smatch warning (dm-zoned-target)
- update the documentation and enable inline-crypto passthrough
(dm-thin)
* tag 'for-6.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: set DM_TARGET_PASSES_CRYPTO feature for dm-thin
dm-thin: update the documentation
dm-raid: do not include dm-core.h
vdo: omit need_resched() before cond_resched()
md: dm-zoned-target: Initialize return variable r to avoid uninitialized use
dm-verity: remove support for asynchronous hashes
dm-mpath: don't print the "loaded" message if registering fails
dm-mpath: make dm_unregister_path_selector return void
dm: ima: avoid extra calls to strlen()
dm: Simplify dm_io_complete()
dm: Remove unnecessary return in dm_zone_endio()
dm raid: add support for resync w/o metadata devices
dm-flakey: Fix corrupt_bio_byte setup checks
dm-table: fix checking for rq stackable devices
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
Commit 2df7168717 ("dm: Always split write BIOs to zoned device
limits") updates the device-mapper driver to perform splits for the
write BIOs. However, it did not address the cases where DM targets do
not emulate zone append, such as in the cases of dm-linear or dm-flakey.
For these targets, when the write BIOs span across zone boundaries, they
trigger WARN_ON_ONCE(bio_straddles_zones(bio)) in
blk_zone_wplug_handle_write(). This results in I/O errors. The errors
are reproduced by running blktests test case zbd/004 using zoned
dm-linear or dm-flakey devices.
To avoid the I/O errors, handle the write BIOs regardless whether DM
targets emulate zone append or not, so that all write BIOs are split at
zone boundaries. For that purpose, drop the check for zone append
emulation in dm_zone_bio_needs_split(). Its argument 'md' is no longer
used then drop it also.
Fixes: 2df7168717 ("dm: Always split write BIOs to zoned device limits")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20250717103539.37279-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DM targets must not split zone append and write operations using
dm_accept_partial_bio() as doing so is forbidden for zone append BIOs,
breaks zone append emulation using regular write BIOs and potentially
creates deadlock situations with queue freeze operations.
Modify dm_accept_partial_bio() to add missing BUG_ON() checks for all
these cases, that is, check that the BIO is a write or write zeroes
operation. This change packs all the zone related checks together under
a static_branch_unlikely(&zoned_enabled) and done only if the target is
a zoned device.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20250625093327.548866-6-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Any zoned DM target that requires zone append emulation will use the
block layer zone write plugging. In such case, DM target drivers must
not split BIOs using dm_accept_partial_bio() as doing so can potentially
lead to deadlocks with queue freeze operations. Regular write operations
used to emulate zone append operations also cannot be split by the
target driver as that would result in an invalid writen sector value
return using the BIO sector.
In order for zoned DM target drivers to avoid such incorrect BIO
splitting, we must ensure that large BIOs are split before being passed
to the map() function of the target, thus guaranteeing that the
limits for the mapped device are not exceeded.
dm-crypt and dm-flakey are the only target drivers supporting zoned
devices and using dm_accept_partial_bio().
In the case of dm-crypt, this function is used to split BIOs to the
internal max_write_size limit (which will be suppressed in a different
patch). However, since crypt_alloc_buffer() uses a bioset allowing only
up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device
max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS
(128), must thus be respected and write BIOs split accordingly.
In the case of dm-flakey, since zone append emulation is not required,
the block layer zone write plugging is not used and no splitting of BIOs
required.
Modify the function dm_zone_bio_needs_split() to use the block layer
helper function bio_needs_zone_write_plugging() to force a call to
bio_split_to_limits() in dm_split_and_process_bio(). This allows DM
target drivers to avoid using dm_accept_partial_bio() for write
operations on zoned DM devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250625093327.548866-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for fixing device mapper zone write handling, introduce
the inline helper function bio_needs_zone_write_plugging() to test if a
BIO requires handling through zone write plugging using the function
blk_zone_plug_bio(). This function returns true for any write
(op_is_write(bio) == true) operation directed at a zoned block device
using zone write plugging, that is, a block device with a disk that has
a zone write plug hash table.
This helper allows simplifying the check on entry to blk_zone_plug_bio()
and used in to protect calls to it for blk-mq devices and DM devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The local variable first_requeue is not needed since it is always equal
to dm_io_flagged(io, DM_IO_WAS_SPLIT). Call __dm_io_complete() passing
this value directly and remove first_requeue.
Also declare dm_io_complete() as inline to make sure it is inlined in
its single call site, thus avoiding the cost of a function call.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
This adds a 'bool *forward' parameter to .prepare_ioctl, which allows
device mapper targets to accept ioctls to themselves instead of the
underlying device. If the target already fully handled the ioctl, it
sets *forward to false and device mapper won't forward it to the
underlying device any more.
In order for targets to actually know what the ioctl is about and how to
handle it, pass also cmd and arg.
As long as targets restrict themselves to interpreting ioctls of type
DM_IOCTL, this is a backwards compatible change because previously, any
such ioctl would have been passed down through all device mapper layers
until it reached a device that can't understand the ioctl and would
return an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
A small code cleanup: use blk_queue_disable_discard and
blk_queue_disable_write_zeroes instead of disable_discard and
disable_write_zeroes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm_revalidate_zones() only allowed new or previously unzoned devices to
call blk_revalidate_disk_zones(). If the device was already zoned,
disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones()
returned without doing any work. This would make the zoned settings for
the device not match the new table. If the device had zone write plug
resources, it could run into errors like bdev_zone_is_seq() reading
invalid memory because disk->conv_zones_bitmap was the wrong size.
If the device doesn't have any zone write plug resources, calling
blk_revalidate_disk_zones() will always correctly update device. If
blk_revalidate_disk_zones() fails, it can still overwrite or clear the
current disk->nr_zones value. In this case, DM must restore the previous
value of disk->nr_zones, so that the zoned settings will continue to
match the previous value that it fell back to.
If the device already has zone write plug resources,
blk_revalidate_disk_zones() will not correctly update them, if it is
called for arbitrary zoned device changes. Since there is not much need
for this ability, the easiest solution is to disallow any table reloads
that change the zoned settings, for devices that already have zone plug
resources. Specifically, if a device already has zone plug resources
allocated, it can only switch to another zoned table that also emulates
zone append. Also, it cannot change the device size or the zone size. A
device can switch to an error target.
Fixes: bb37d77239 ("dm: introduce zone append emulation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
With request-based dm, the mempools don't need reloading when switching
tables, but the unused table mempools are not freed until the active
table is finally freed. Free them immediately if they are not needed.
Fixes: 29dec90a0f ("dm: fix bio_set allocation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
__bind was changing the disk capacity, geometry and mempools of the
mapped device before calling dm_table_set_restrictions() which could
fail, forcing dm to drop the new table. Failing here would leave the
device using the old table but with the wrong capacity and mempools.
Move dm_table_set_restrictions() earlier in __bind(). Since it needs the
capacity to be set, save the old version and restore it on failure.
Fixes: bb37d77239 ("dm: introduce zone append emulation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
