Replace the TODO comment in adf4350_set_freq() with a NOTE explaining
that a constant-time approach using fls_long() was attempted but deemed
more complex without meaningful benefit for initialization code.
Signed-off-by: Neel Bullywon <neelb2403@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device variable in ad9523_probe() to simplify
subsequent conversions and improve code readability.
Split pdata declaration and assignment since the result is validated
immediately after.
No functional change.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use dev_err_probe() instead of dev_err() in the probe path to ensure
proper handling of deferred probing and to simplify error handling.
Also fix the format specifier for vco_freq_hz from %lld to %llu since
it is u64 (unsigned), and add missing newline to the error message.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device variable in admv4420_probe() to
simplify subsequent conversions and improve code readability.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.
Several cleanup patches have been applied to this driver recently so
this will need a manual backport.
Fixes: da35a7b526 ("iio: frequency: admv1013: add support for ADMV1013")
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Return -EINVAL instead of -1 when no valid PLL parameters solution is
found. Using standard kernel error codes ensures consistency and proper
error propagation through the call chain.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver currently defines device attributes using symbolic permission
flags (S_IRUGO and S_IWUSR). Update these to use octal permissions (0444
and 0200) to resolve checkpatch warnings.
Signed-off-by: Bhargav Joshi <rougueprince47@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Platform data pointer dereferences for pll1_charge_pump_current_nA and
pll2_charge_pump_current_nA were split across multiple lines. Bring the
dereference chains onto a single line.
This resolves the following checkpatch.pl warnings:
WARNING: Avoid multiple line dereference - prefer 'pdata->pll1_charge_pump_current_nA'
WARNING: Avoid multiple line dereference - prefer 'pdata->pll2_charge_pump_current_nA'
Signed-off-by: Bhargav Joshi <rougueprince47@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The macros AD9523_CLK_DIST_DIV_PHASE_REV(x) and
AD9523_CLK_DIST_DIV_REV(x) implicitly relied on the variable named 'ret'
instead of using passed argument '(x)'. Update the macros to explicitly
use the argument '(x)' for their operations.
This also resolves the following checkpatch.pl warning: Argument '(x)'
is not used in function-like macro.
Signed-off-by: Bhargav Joshi <rougueprince47@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The regmap_read_poll_timeout() uses ADF4377_0000_SOFT_RESET_R_MSK
twice instead of checking both SOFT_RESET_MSK (bit 0) and
SOFT_RESET_R_MSK (bit 7). This causes an incomplete reset status check.
The code first sets both SOFT_RESET and SOFT_RESET_R bits to 1 via
regmap_update_bits(), then polls for them to be cleared. Since we set
both bits before polling, we should be waiting for both to clear.
Fix by using both masks as done in regmap_update_bits() above.
Fixes: eda549e2e5 ("iio: frequency: adf4377: add support for ADF4377")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
adf4350_parse_dt() returns NULL only when devm_kzalloc() fails. The
caller should return -ENOMEM in this case, not -EINVAL.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add clk provider feature for the adf4377.
Even though the driver was sent as an IIO driver in most cases the
device is actually seen as a clock provider.
This patch aims to cover actual usecases requested by users in order to
completely control the output frequencies from userspace.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan writes:
IIO: New device support, features and cleanup for 6.18
New device support
==================
ad,ade9000
- New driver for this complex energy and power monitoring ADC.
infineon,tlv493d
- New driver for this 3D magnetic sensor.
intel,dollar
- New driver for this TI PMIC (part number unknown)
marvel,88pm886
- Driver for this PMIC ADC.
microchip,mcp9600
- Add explicit support for the mcp9601 which has some additional features
over the mcp9600.
rohm,bd79112
- New driver for this ADC / GPIO Chip.
Features
========
Core
- New helper to multiply data expressed in IIO types.
- Add KUnit tests.
- New IIO_ALTCURRENT type, similar to existing IIO_ALTVOLTAGE
- Add some channel modifiers related to energy and power, such as
reactive.
adi,ad7124
- Support external clocks sources and output of the internal clocks.
- Filter control.
adi,ad7173
- Add filter support. Some fiddly interactions with other parameters on this
device.
adi,ad7779
- Add backend support which required control of the number of lanes used.
liteon,ltr390
- Add runtime PM support.
microchip,mcp9600
- Add support for different thermocouple types.
Cleanup and minor fixes
=======================
core
- Switch info_mask fields to be unsigned. Not clear why they were ever
signed.
- Fix handling of negative channel scale in iio_convert_raw_to_processed()
- Fix offset handling for channels without a scale attribute.
- Improve the precision of scaling slightly.
- Drop apparent handling of IIO_CHAN_INFO_PROCESSED for devices that don't
have any such channels.
various
- Drop many pm_runtime_mark_last_busy() calls now
pm_runtime_put_autosuspend() calls it internally.
- Drop dev_err_probe() calls where the error code is hard coded as -ENOMEM
as they don't do anything.
- Drop dev_err() calls where the error code is -ENOMEM. This will reduce
error prints, but memory failures generate a lot of messages anyway
so unlikely we need these prints.
current-sense-amplifier
- Add #io-channels property this channel to be used by a consumer driver.
adi,ad7124
- Fix incorrect clocks dt-binding property.
- Make the mclk clock optional in DT - this is internal to the ADC so should
never have been in he binding.
- Fix up sample rate to comply with ABI.
- Use read_avail() callback rather than opencoding similar.
- Deploy guard() to clean up some lock handling.
adi,ad7768
- Use devm_regulator_get_enable_read_voltage() to replace similar code.
adi,ad7816
- Drop an unnecessary dev_set_drvdata() call as nothing uses the data.
ad,adxl345
- Fix missing blank line before bullet list in documentation.
arm,scmi
- Use devm_kcalloc() for an array allocation rather than devm_kzalloc().
bosch,bmi270
- Match an ACPI ID seen in the wild. It is not spec compliant but we can't
do much about that.
bosch,bmp280
- Drop overly noisy dev_info()
- Allow for sleeping gpio controllers.
gogle,cros-ec
- Drop unused location attribute that has been replaced by label.
invense,icm42600
- Simplify the power management.
- Use guard() to simplify some locking.
maxim,max1238
- Add io-channel-cells property to dt-binding as there is an in tree
consumer.
microchip,mcp9600
- Specify a default value in dt-binding for the thermocouple type
- General whitespace cleanup.
samsung,exynos
- Drop support for the S3C2410 including bindings, and touchscreen support
as nothing else uses that.
- Drop platform ID based binding as not used.
st,vl53l0x
- Fix returning the wrong variable in an error path.
ti,pac1934
- Replace open coded devm_mutex_init().
xilinx,ams
- Update maintainers entry.
* tag 'iio-for-6.18a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
MAINTAINERS: Support ROHM BD79112 ADC
iio: adc: Support ROHM BD79112 ADC/GPIO
dt-bindings: iio: adc: ROHM BD79112 ADC/GPIO
iio: pressure: bmp280: Use gpiod_set_value_cansleep()
iio: pressure: bmp280: Remove noisy dev_info()
iio: ABI: add filter types for ad7173
iio: adc: ad7173: support changing filter type
iio: adc: ad7173: rename odr field
iio: adc: ad7173: rename ad7173_chan_spec_ext_info
iio: adc: Add driver for Marvell 88PM886 PMIC ADC
dt-bindings: mfd: 88pm886: Add #io-channel-cells
iio: ABI: document "sinc4+rej60" filter_type
iio: adc: ad7124: add filter support
iio: adc: ad7124: support fractional sampling_frequency
iio: adc: ad7124: use guard(mutex) to simplify return paths
iio: adc: ad7124: use read_avail() for scale_available
iio: adc: ad7124: use clamp()
iio: adc: ad7124: fix sample rate for multi-channel use
Documentation: ABI: iio: add sinc4+lp
docs: iio: add documentation for ade9000 driver
...
The ADF4350/1 features a programmable dual-modulus prescaler of 4/5 or 8/9.
When set to 4/5, the maximum RF frequency allowed is 3 GHz.
Therefore, when operating the ADF4351 above 3 GHz, this must be set to 8/9.
In this context not the RF output frequency is meant
- it's the VCO frequency.
Therefore move the prescaler selection after we derived the VCO frequency
from the desired RF output frequency.
This BUG may have caused PLL lock instabilities when operating the VCO at
the very high range close to 4.4 GHz.
Fixes: e31166f0fd ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250829-adf4350-fix-v2-1-0bf543ba797d@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/pndectqm7te.a.out@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
