Previously, the driver's internal wedged.mode state was updated without
verifying whether the corresponding engine reset policy update in GuC
succeeded. This could leave the driver reporting a wedged.mode state
that doesn't match the actual reset behavior programmed in GuC.
With this change, the reset policy is updated first, and the driver's
wedged.mode state is modified only if the policy update succeeds on all
available GTs.
This patch also introduces two functional improvements:
- The policy is sent to GuC only when a change is required. An update
is needed only when entering or leaving XE_WEDGED_MODE_UPON_ANY_HANG,
because only in that case the reset policy changes. For example,
switching between XE_WEDGED_MODE_UPON_CRITICAL_ERROR and
XE_WEDGED_MODE_NEVER doesn't affect the reset policy, so there is no
need to send the same value to GuC.
- An inconsistent_reset flag is added to track cases where reset policy
update succeeds only on a subset of GTs. If such inconsistency is
detected, future wedged mode configuration will force a retry of the
reset policy update to restore a consistent state across all GTs.
Fixes: 6b8ef44cc0 ("drm/xe: Introduce the wedged_mode debugfs")
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patch.msgid.link/20260107174741.29163-3-lukasz.laguna@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Previously, VRAM TTM resource manager debugfs entries (vram0_mm / vram1_mm)
were created globally in the XE debugfs root directory. But technically,
each tile has an associated VRAM TTM manager, which it can own.
Let's create VRAM memory manager debugfs entries directly under each tile's
debugfs directory for better alignment with the per-tile memory layout.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20251127073643.144379-1-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Introduce a debug filesystem node to disable late binding fw reload
during the system or runtime resume. This is intended for situations
where the late binding fw needs to be loaded from user mode,
perticularly for validation purpose.
Note that xe kmd doesn't participate in late binding flow from user
space. Binary loaded from the userspace will be lost upon entering to
D3 cold hence user space app need to handle this situation.
v2:
- s/(uval == 1) ? true : false/!!uval/ (Daniele)
v3:
- Refine the commit message (Daniele)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905154953.3974335-9-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In addition of checking if we are running on the BATTLEMAGE,
we should also check for not being a VF driver, as VFs can't
access necessary registers, and doing so leads to:
| .. [drm] GT0: VF is trying to read an inaccessible register 0x35b004+0x0
| RIP: 0010:xe_gt_sriov_vf_read32+0x5e2/0x8a0 [xe]
| Call Trace:
| xe_mmio_read32+0x110/0x280 [xe]
| read_residency_counter+0x42/0xd0 [xe]
| dgfx_pkg_residencies_show+0x115/0x190 [xe]
| .. [drm] Package G2 counter failed to read, ret -19
or
| .. [drm] GT0: VF is trying to read an inaccessible register 0x35b004+0x0
| RIP: 0010:xe_gt_sriov_vf_read32+0x5e2/0x8a0 [xe]
| Call Trace:
| xe_mmio_read32+0x110/0x280 [xe]
| read_residency_counter+0x42/0xd0 [xe]
| dgfx_pcie_link_residencies_show+0xe7/0x160 [xe]
| .. [drm] PCIE LINK L0 RESIDENCY counter failed to read, ret -19
Similarly, there is no point to expose inject_csc_hw_error on VFs,
as HW errors support is already disabled for VFs.
Bspec: 53221
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Soham Purkait <soham.purkait@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905173625.8398-1-michal.wajdeczko@intel.com
Requirement for PSMI capture is to have a physically contiguous buffer.
All the needed configuration is done by the userspace tool directly to
the GPU via mmio access.
This interface only support allocating from VRAM regions. For integrated
devices, the PSMI buffer is in SYSTEM memory and should be allocated by
userspace using hugetlbfs.
Here we add the ability to allocate a region of physically contiguous
memory by writing to debugfs file (listed below). For multi-tile devices,
the capture tool requires ability to allocate a capture buffer per tile
(VRAM region) and so user can specify a region_mask. The tool then
can mmap the buffers via direct mmap of the PCIBAR via sysfs.
To support the capture tool, 3 new debugfs entries are added:
psmi_capture_addr - physical address per VRAM region's capture buffer
psmi_capture_region_mask - select which region(s) to allocate a buffer
psmi_capture_size - size of current capture buffer
Writing psmi_capture_size will allocate new buffer of requested size per
region after freeing any current buffers.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Brian Welty <brian.welty@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> # v2
Link: https://lore.kernel.org/r/20250821-psmi-v5-2-34ab7550d3d8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add debug nodes, "dgfx_pkg_residencies" for G-states (G2, G6, G8, G10,
ModS) and "dgfx_pcie_link_residencies" for PCIe link states(L0, L1, L1.2)
residency counters.
v1:
- Expose all G-State residency counter values under
dgfx_pkg_residencies. (Anshuman)
- Include runtime_get/put. (Riana)
v2:
- Move offset macros to drm/xe/regs/xe_pmt. (Riana)
v3:
- Include debugfs node "dgfx_pcie_link_residencies" for pcie link
residency counter values. (Anshuman)
v4:
- Include check for BMG and add helper function for repetitive
code. (Riana)
- Add for loop and local struct to avoid repetition. (Riana)
- Use "drm_debugfs_create_files" to create debugfs. (Karthik)
v5:
- Reorder commits to reflect the correct dependency hierarchy. (Jonathan)
- Simplification of commit message and rectified register offset.(Karthik)
- Error handling and return before printing. (Riana)
v6:
- Remove check for DGFX as BMG is discrete. (Karthik)
- Rearrange residency offsets in ascending order. (Riana)
v7:
- Squash the macros into the patch they are used in. (Lucas)
Signed-off-by: Soham Purkait <soham.purkait@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250716101412.3062780-2-soham.purkait@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
While in sysfs we are correctly trying to reflect the hardware
architecture and we expose GT attributes in per tile hierarchy,
in debugfs we expose GT attributes at flat level, without tiles.
Create debugfs directories to represent each tile and move GT
attributes under matching parent tile directory. To not break
existing debugfs tools, create symlink under old location:
/sys/kernel/debug/dri/0000:00:02.0/
├── ...
├── gt0 -> tile0/gt0
├── gt1 -> tile0/gt1
├── tile0
│ ├── gt0
│ │ ├── ...
│ ├── gt1
│ │ ├── ...
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250714193645.763-1-michal.wajdeczko@intel.com
Some workarounds need to be able to be applied ahead of any GT
initialization for example 15015404425. This patch creates XE_DEVICE_WA
macro, in the same vein as XE_WA. This macro can be used ahead of GT
initialization, and can be tracked in sysfs. This should alleviate some
of the complexities that exist in i915.
v2: name change SoC to Device, address style issues
v5: split into separate patch from RTP changes, put oob within a struct,
move the initiation of oob workarounds into xe_device_probe_early(),
clean up the comments around XE_WA.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20250709221605.172516-5-matthew.s.atwood@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
It is generally expected that the write() function should return a
positive value indicating the number of bytes written or a negative
error code if an error occurs. Returning 0 is unusual and can lead
to unexpected behavior.
When the user program writes the same value to wedged_mode twice in
a row, a lockup will occur, because the value expected to be
returned by the write() function inside the program should be equal
to the actual written value instead of 0.
To reproduce the issue:
echo 1 > /sys/kernel/debug/dri/0/wedged_mode
echo 1 > /sys/kernel/debug/dri/0/wedged_mode <- lockup here
Signed-off-by: Xin Wang <x.wang@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213223615.2327367-1-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
