FriendlyELEC's HD702E module is an eDP panel (in as much as it's some
LVDS LCD behind a Chrontel CH7511B eDP bridge), so move its data over
to the eDP driver, also resolving the warning about the missing bpc
value in the process.
The unfortunate combination of HPD not being wired up and the RK3399 eDP
controller's behaviour seems to result in the EDID not being readable
over DP-AUX without probing the panel first, thus the hard-coded mode is
still needed to get things going.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/a00a59dcef3693efb02a8ee942848fbeaeaf05ba.1769191673.git.robin.murphy@arm.com
The switch from devm_kzalloc() + drm_panel_init() to
devm_drm_panel_alloc() introduced a regression.
Several panel descriptors do not set connector_type. For those panels,
panel_simple_probe() used to compute a connector type (currently DPI as a
fallback) and pass that value to drm_panel_init(). After the conversion
to devm_drm_panel_alloc(), the call unconditionally used
desc->connector_type instead, ignoring the computed fallback and
potentially passing DRM_MODE_CONNECTOR_Unknown, which
drm_panel_bridge_add() does not allow.
Move the connector_type validation / fallback logic before the
devm_drm_panel_alloc() call and pass the computed connector_type to
devm_drm_panel_alloc(), so panels without an explicit connector_type
once again get the DPI default.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/stable/20251126-lcd_panel_connector_type_fix-v2-1-c15835d1f7cb%40microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251218-lcd_panel_connector_type_fix-v3-1-ddcea6d8d7ef@microchip.com
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
The LD070WX3 is a Color Active Matrix Liquid Crystal Display with an
integral Light Emitting Diode (LED) backlight system. The matrix employs
a-Si Thin Film Transistor as the active element. It is a transmissive type
display operating in the normally Black mode. This TFT-LCD has 7.0 inches
diagonally measured active display area with WXGA resolution (800 by 1280
pixel array).
LG LD070WX3-SL01 MIPI DSI panel was treated as simple DSI panel when it is
actually not and requires proper setup for correct work. Simple panel work
relied on preliminary configuration done by bootloader.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-3-clamor95@gmail.com
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
Commit de04bb0089 ("drm/panel/panel-simple: Use the new allocation in
place of devm_kzalloc()") moved the call to drm_panel_init into the
devm_drm_panel_alloc(), which needs a connector type to initialize
properly.
In the panel-dpi compatible case, the passed panel_desc structure is an
empty one used as a discriminant, and the connector type it contains
isn't actually initialized.
It is initialized through a call to panel_dpi_probe() later in the
function, which used to be before the call to drm_panel_init() that got
merged into devm_drm_panel_alloc().
So, we do need a proper panel_desc pointer before the call to
devm_drm_panel_alloc() now. All cases associate their panel_desc with
the panel compatible and use of_device_get_match_data, except for the
panel-dpi compatible.
In that case, we're expected to call panel_dpi_probe, which will
allocate and initialize the panel_desc for us.
Let's create such a helper function that would be called first in the
driver and will lookup the desc by compatible, or allocate one if
relevant.
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/all/20250612081834.GA248237@francesco-nb/
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-4-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
In order to fix the regession introduced by commit de04bb0089
("drm/panel/panel-simple: Use the new allocation in place of
devm_kzalloc()"), we need to move the panel_desc lookup into the common
panel_simple_probe() function.
There's two callers for that function, the probe implementations of the
platform and MIPI-DSI drivers panel-simple implements.
The MIPI-DSI driver's probe will need to access the current panel_desc
to initialize properly, which won't be possible anymore if we make that
lookup in panel_simple_probe().
However, we can make panel_simple_probe() return the initialized
panel_simple structure it allocated, which will contain a pointer to the
associated panel_desc in its desc field.
This doesn't fix de04bb0089 ("drm/panel/panel-simple: Use the new
allocation in place of devm_kzalloc()") still, but makes progress
towards that goal.
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-3-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
If the panel-simple driver is probed from a panel-dpi compatible, the
driver will use an empty panel_desc structure as a descriminant. It
will then allocate and fill another panel_desc as part of its probe.
However, that allocation needs to happen after the panel_simple
structure has been allocated, since panel_dpi_probe(), the function
doing the panel_desc allocation and initialization, takes a panel_simple
pointer as an argument.
This pointer is used to fill the panel_simple->desc pointer that is
still initialized with the empty panel_desc when panel_dpi_probe() is
called.
Since commit de04bb0089 ("drm/panel/panel-simple: Use the new
allocation in place of devm_kzalloc()"), we will need the panel
connector type found in panel_desc to allocate panel_simple. This
creates a circular dependency where we need panel_desc to create
panel_simple, and need panel_simple to create panel_desc.
Let's break that dependency by making panel_dpi_probe simply return the
panel_desc it initialized and move the panel_simple->desc assignment to
the caller.
This will not fix the breaking commit entirely, but will move us towards
the right direction.
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-2-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
