When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes screen unblanking (after blanking once) on
mt8188-geralt-ciri-sku1 device.
Cc: stable@vger.kernel.org # 6.11+
Fixes: 0ef94554dc ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260425165751.1716569-1-zhengxingda@iscas.ac.cn
When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes error messages shown in kernel log when unblanking on
mt8183-kukui-kodama-sku32 device.
Cc: stable@vger.kernel.org
Fixes: a869b9db7a ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260503091708.1079962-1-zhengxingda@iscas.ac.cn
Like a number of other panel drivers, this newly merged driver
needs DRM_DISPLAY_DSC_HELPER to be enabled:
arm-linux-gnueabi-ld: drivers/gpu/drm/panel/panel-himax-hx83121a.o: in function `himax_prepare':
panel-himax-hx83121a.c:(.text+0x1024): undefined reference to `drm_dsc_pps_payload_pack'
Fixes: a7c61963b7 ("drm/panel: Add Himax HX83121A panel driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260413071043.3829868-1-arnd@kernel.org
Pull more drm fixes from Dave Airlie:
"These are the regular fixes that have built up over last couple of
weeks, all pretty minor and spread all over.
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix"
* tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
MAINTAINERS: split hisilicon maintenance and add Yongbang Shi for hibmc-drm matainers
drm/v3d: Reject empty multisync extension to prevent infinite loop
drm/panel: visionox-rm69299: Make use of prepare_prev_first
drm/drm_atomic: duplicate colorop states if plane color pipeline in use
drm/nouveau: fix nvkm_device leak on aperture removal failure
hv: Select CONFIG_SYSFB only for CONFIG_HYPERV_VMBUS
dma-fence: Silence sparse warning in dma_fence_describe
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
drm/arcpgu: fix device node leak
drm/panthor: Fix outdated function documentation
drm/panthor: Extend VM locked region for remap case to be a superset
dma-buf: fix UAF in dma_buf_put() tracepoint
drm/bridge: stm_lvds: Do not fail atomic_check on disabled connector
drm/atomic: Increase timeout in drm_atomic_helper_wait_for_vblanks()
The Ilitek ILI9806E controller can support different transport buses,
such as MIPI-DSI and SPI. The current implementation is specific to
the MIPI-DSI interface.
In preparation for adding SPI support, rename the current Kconfig
symbol and files to be DSI-specific, clarifying the current scope
of the code.
Since DRM_PANEL_ILITEK_ILI9806E is not used in any in-tree defconfig,
the symbol is renamed directly to DRM_PANEL_ILITEK_ILI9806E_DSI without
providing a legacy compatibility alias.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-2-dario.binacchi@amarulasolutions.com
Convert the driver to use the non-deprecated mipi_dsi_*_multi() helpers and
mipi_dsi_msleep().
Switch DCS command sequences to the multi context API and
accumulate errors via struct mipi_dsi_multi_context. Replace
open-coded error handling with the multi helpers and convert
nt36672a_send_cmds() and power sequencing accordingly.
This patch is intended to functionally be a no-op, though there is one
slight change. Previously a failure in regulator_bulk_disable() would
have caused nt36672a_panel_unprepare() to return an error. Now it
won't. No other errors in nt36672a_panel_unprepare() were propagated,
so this makes things consistent.
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260305044921.10942-1-chintanlike@gmail.com
