Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
Sashiko identified a possible infinite loop [1].
ACPM IPC sequence numbers are tracked via a 64-bit bitmap. Previously,
acpm_prepare_xfer() used a do...while loop to search for a free
sequence number.
If all 63 available sequence numbers are leaked due to transient
hardware timeouts or mailbox failures, the bitmap becomes full.
The next call to acpm_prepare_xfer() would enter an infinite loop.
Fix this by utilizing the kernel's optimized bitmap search functions
(find_next_zero_bit / find_first_zero_bit). If the pool is completely
exhausted, log the failure and return -EBUSY to allow the kernel to
fail gracefully instead of hanging.
Furthermore, drop the allocation loop entirely. Because
acpm_prepare_xfer() is strictly called under the 'tx_lock' mutex,
sequence number allocations are perfectly serialized. If
find_next_zero_bit() locates a free bit, a single
test_and_set_bit_lock() is mathematically guaranteed to succeed.
To enforce this locking invariant, wrap the allocation in a
WARN_ON_ONCE. If the atomic set fails, it indicates the driver's
mutex serialization is fundamentally broken. The warning generates a
stack trace for debugging, while returning -EIO immediately aborts the
transfer to prevent silent payload corruption.
Cc: stable@vger.kernel.org
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-7-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sashiko identified memory ordering races in [1].
The ACPM driver uses a globally shared 'bitmap_seqnum' to track
available sequence numbers. Even though threads now strictly free their
own sequence numbers, the allocation and freeing of these bits across
concurrent threads are effectively lockless operations and require
explicit LKMM memory barriers.
Previously, the driver used plain bitwise operators (test_bit, set_bit,
clear_bit), which lack ordering guarantees. This creates two race
conditions on weakly ordered architectures like ARM64:
1. Polling Release Violation: The polling thread copies its payload and
calls clear_bit(). Without a release barrier, the CPU can reorder
the memory operations, making the cleared bit globally visible
before the payload reads have fully completed.
2. TX Acquire Violation: The TX thread loops on test_bit(), calls
set_bit(), and then wipes the payload buffer via memset(). Without
an acquire barrier, the CPU can speculatively execute the memset()
before the bit is safely and formally claimed.
If these reorderings overlap, a new TX thread can claim the sequence
number and overwrite the buffer while the original polling thread is
still actively reading from it.
Fix this by upgrading the bitwise operators. Wrap the TX allocation in
test_and_set_bit_lock() to establish formal LKMM Acquire semantics, and
pair it with clear_bit_unlock() in the polling path to enforce Release
semantics.
Cc: stable@vger.kernel.org
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260423-acpm-fixes-sashiko-reports-v1-0-2217b790925e%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-6-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sashiko identified severe races in the polling state machine [1].
In the ACPM driver's polling mode, threads waited for responses by
monitoring the globally shared 'bitmap_seqnum'. This caused false
timeouts because if a thread processed its response and freed the
sequence number, a concurrent TX thread could immediately reallocate
it before the polling thread woke up.
Additionally, the driver suffered from a cross-thread Use-After-Free
(UAF) preemption race. Previously, acpm_get_rx() cleared the sequence
number of whichever RX message it drained from the hardware queue. This
meant Thread A could globally free Thread B's sequence slot while
Thread B was asleep. A new Thread C could then steal the slot,
overwrite the buffer, and leave Thread B to wake up to corrupted state
or a timeout.
Fix this by rewriting the polling state machine:
1. Decouple polling from the global allocator by introducing a per-slot
'completed' flag, synchronized via smp_store_release() and
smp_load_acquire().
2. Strip acpm_get_saved_rx() out of acpm_get_rx() to make it a pure
queue-draining function. Introduce a 'native_match' boolean argument
which evaluates to true only if the thread natively processed its
own sequence number during the call. This explicitly informs the
polling loop whether it must retrieve its payload from the
cross-thread cache.
3. Centralize the cache fallback and sequence number free (clear_bit)
inside the polling loop. Crucially, the free operation now strictly
targets the thread's own TX sequence number (xfer->txd[0]), rather
than the drained RX sequence number. This enforces strict ownership:
a thread only ever frees its own allocated sequence slot, and only
at the exact moment it completes its poll, eliminating the UAF
window.
Furthermore, explicitly guard the 'native_match' assignment with an
if (rx_seqnum == tx_seqnum) check, even for zero-length (no payload)
responses. While an unguarded assignment wouldn't crash (because the
cache fallback acpm_get_saved_rx() safely returns early on zero-length
transfers) doing so would "lie" to the state machine. If a thread
drained the queue and found another thread's zero-length message,
setting native_match = true would falsely convince the polling loop
that it natively handled its own response. Maintaining a rigorous state
machine requires that native_match is only set when a thread explicitly
processes its own sequence number.
Cc: stable@vger.kernel.org
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260429-acpm-fixes-sashiko-reports-v3-0-47cf74ab09ad%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-5-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Pull LoongArch fixes from Huacai Chen:
"Rework KASLR to avoid initrd overlap, remove some unused code to avoid
a build warning, fix some bugs in kprobes and KVM"
* tag 'loongarch-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Move some variable declarations to paravirt.h
LoongArch: kprobes: Fix handling of fatal unrecoverable recursions
LoongArch: kprobes: Use larch_insn_text_copy() to patch instructions
LoongArch: Remove unused code to avoid build warning
LoongArch: Avoid initrd overlap during kernel relocation
LoongArch: Skip relocation-time KASLR if already applied
efi/loongarch: Randomize kernel preferred address for KASLR
Pull SoC fixes from Arnd Bergmann:
- The ff-a firmware driver gets 11 individual bugfixes for a number of
issues with robustness to buggy firmware or client implementations.
Another firmware fix address suspend to RAM via PSCI firmware.
- The final code change is for the old Arm Integrator reference
platform that recently started exposing an old NULL pointer
dereference bug.
- The MAINTAINERS file gets two updates, notably James Tai and Yu-Chun
Lin are stepping up as co-maintainers for the Realtek platform.
- The remaining patches are all for devicetree files. Two of these are
for riscv boards, the rest are all for enesas Arm platforms,
addressing build time checking issues as well as minor configuration
problems.
* tag 'soc-fixes-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
firmware: psci: Set pm_set_resume/suspend_via_firmware() for SYSTEM_SUSPEND
ARM: realtek: MAINTAINERS: Include pin controller drivers
MAINTAINERS: Add maintainers for ARM/REALTEK ARCHITECTURE
ARM: integrator: Fix early initialization
firmware: arm_ffa: Fix sched-recv callback partition lookup
firmware: arm_ffa: Snapshot notifier callbacks under lock
firmware: arm_ffa: Align RxTx buffer size before mapping
firmware: arm_ffa: Validate framework notification message layout
firmware: arm_ffa: Keep framework RX release under lock
firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies
firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0
firmware: arm_ffa: Fix per-vcpu self notifications handling in workqueue
firmware: arm_ffa: Avoid collapsing NPI work from different CPUs
firmware: arm_ffa: Skip free_pages on RX buffer alloc failure
firmware: arm_ffa: Check for NULL FF-A ID table while driver registration
riscv: dts: microchip: fix icicle i2c pinctrl configuration
riscv: dts: starfive: jh7110: Drop CAMSS node
arm64: dts: renesas: r9a09g056: Add #mux-state-cells to usb20phyrst
arm64: dts: renesas: r9a09g057: Add #mux-state-cells to usb2{0,1}phyrst
ARM: dts: renesas: rskrza1: Drop superfluous cells
...
Introduce efi_get_kimg_kaslr_address() helper to compute the preferred
kernel image load address dynamically when CONFIG_RANDOMIZE_BASE is
enabled. The function derives a random offset by using the EFI-provided
randomness combined with the timer tick value, and constrains it within
CONFIG_RANDOMIZE_BASE_MAX_OFFSET.
Update EFI_KIMG_PREFERRED_ADDRESS to call this helper so that the EFI
stub can select a randomized load address when KASLR is active, while
preserving the original base address behavior when KASLR is disabled or
"nokaslr" is specified.
Note: LoongArch can't KASLR for hibernation, so set efi_nokaslr to true
if "resume=<devname>" is explicitly specified in cmdline.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The LTE enabled version of the IdeaPad Duet 3 10IGL5 needs the
same quirk as the non-LTE version. As these are the only two
IdeaPad Duet 3 10IGL5 versions, we can safely use non exact matching.
Tested on a IdeaPad Duet 3 10IGL5-LTE.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Since commit
5894cf571e ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers")
ACPI PRM calls are delegated to a workqueue which runs in a kernel
thread, making it easier to detect and mitigate faulting memory accesses
performed by the firmware.
Rafael reports that such PRM accesses may occur before efisubsys_init()
executes, which is where the workqueue is allocated, leading to NULL
pointer dereferences. Since acpi_init() [which triggers the early PRM
accesses] executes as a subsys_initcall() as well, and has its own
dependencies that may be sensitive to initcall ordering, deferring
acpi_init() is not an option.
So instead, split off the workqueue allocation into its own postcore
initcall, as this is the only missing piece to allow EFI runtime calls
to be made. This ensures that EFI runtime call (including PRM calls) are
accessible to all code running at subsys_initcall() level.
Cc: <stable@vger.kernel.org>
Fixes: 5894cf571e ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers")
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Sashiko identified the leak at [1].
The ACPM driver allocates hardware mailbox channels using
`mbox_request_channel()` during `acpm_channels_init()`. However, the
driver lacked a `.remove` callback and did not free these channels on
subsequent error paths inside `acpm_probe()`.
Additionally, if `acpm_achan_alloc_cmds()` failed during the channel
initialization loop, the function returned immediately, bypassing the
manual cleanup and permanently leaking any channels successfully
requested in previous loop iterations.
Fix this by modifying `acpm_free_mbox_chans()` to match the `devres`
action signature and registering it via `devm_add_action_or_reset()`.
Cc: stable@vger.kernel.org
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-2-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sashiko identified a cross-thread RX length corruption bug when
reviewing the thermal addition to ACPM [1].
When multiple threads concurrently send IPC requests, the ACPM polling
mechanism can encounter responses belonging to other threads. To drain
the queue, the driver saves these concurrent responses into an internal
cache (`rx_data->cmd`) to be retrieved later by the owning thread.
Previously, the driver incorrectly used `xfer->rxcnt` (the expected
receive length of the *current* polling thread) when copying data for
*other* threads into this cache. If the threads expected responses of
different lengths, this resulted in buffer underflows (leading to reads
of uninitialized memory) or potential buffer overflows.
Fix this by replacing the boolean `response` flag in
`struct acpm_rx_data` with `rxcnt`, caching the exact expected receive
length for each specific transaction during transfer preparation. Use
this cached length when saving concurrent responses.
Consequently, ensure that `xfer->rxcnt` is explicitly zeroed in driver
helpers (e.g., `acpm_dvfs_set_xfer`) for fire-and-forget messages to
prevent uninitialized stack garbage from being interpreted as a massive
expected receive length.
Cc: stable@vger.kernel.org
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org [1]
Reported-by: Titouan Ameline de Cadeville <titouan.ameline@gmail.com>
Closes: https://lore.kernel.org/r/20260426210255.73674-1-titouan.ameline@gmail.com/
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-1-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
PSCI specification defines the SYSTEM_SUSPEND feature which enables the
firmware to implement the suspend to RAM (S2RAM) functionality by
transitioning the system to a deeper low power state. When the system
enters such state, the power to the peripheral devices might be removed. So
the respective device drivers must prepare for the possible removal of the
power by performing actions such as shutting down or resetting the device
in their system suspend callbacks.
The Linux PM framework allows the platform drivers to convey this info to
device drivers by calling the pm_set_suspend_via_firmware() and
pm_set_resume_via_firmware() APIs.
Hence, if the PSCI firmware supports SYSTEM_SUSPEND feature, call the above
mentioned APIs in the psci_system_suspend_begin() and
psci_system_suspend_enter() callbacks.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
[mani: reworded the description to be more elaborative]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ffa_sched_recv_cb_update() used list_for_each_entry_safe() to search for
a matching partition and then tested the iterator against NULL. That is
not a valid end-of-list check for circular lists and can fall through
with an invalid pointer. Use a normal iterator and detect the not-found
case correctly before touching the partition state.
Fixes: be61da9385 ("firmware: arm_ffa: Allow multiple UUIDs per partition to register SRI callback")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-11-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Both notification handlers currently look up a notifier callback under
notify_lock, drop the lock, and then dereference the returned
notifier entry. A concurrent unregister can delete and free that
entry in the gap, leaving the handler to dereference stale memory.
Copy the callback pointer and callback data while notify_lock is
still held and invoke the callback only after the lock is dropped.
This keeps the existing callback execution model while removing the
use-after-free window in both the framework and non-framework
notification paths.
Fixes: 285a5ea0f5 ("firmware: arm_ffa: Add support for handling framework notifications")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-10-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Framework notifications carry an indirect message in the shared RX
buffer. Validate the reported offset and size before using them, reject
zero-length payloads, and ensure that any non-header payload starts at
the UUID field rather than in the middle of the message header.
Use the validated offset and size values for both kmemdup() and the UUID
parsing path so malformed firmware data cannot drive an out-of-bounds
read or an oversized allocation.
Fixes: 285a5ea0f5 ("firmware: arm_ffa: Add support for handling framework notifications")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-8-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
The framework notification handler drops rx_lock before issuing
FFA_RX_RELEASE, leaving a window where another RX-buffer user can
start a new FF-A transaction before ownership has actually been
returned to firmware.
Move the FFA_RX_RELEASE calls so they execute while rx_lock is still
held on both the kmemdup() failure path and the normal success path.
While doing that, switch the handler to scoped_guard() to keep the
critical section explicit.
Fixes: 285a5ea0f5 ("firmware: arm_ffa: Add support for handling framework notifications")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-7-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
The register-based PARTITION_INFO_GET path trusted the firmware-provided
indices when copying partition descriptors into the caller buffer.
Reject inconsistent counts or index progressions so the copy loop cannot
write past the allocated array.
Fixes: ba85c644ac ("firmware: arm_ffa: Add support for FFA_PARTITION_INFO_GET_REGS")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-6-8595ae450034@kernel.org
(fixed cur_idx when exactly one descriptor in the first fragment)
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
For FF-A v1.0 the driver registers a bus notifier to backfill UUID
matching, but the notifier was never unregistered on cleanup paths.
Track the registration state and unregister it during teardown and early
partition-setup failure.
Fixes: 9dd15934f6 ("firmware: arm_ffa: Move the FF-A v1.0 NULL UUID workaround to bus notifier")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-5-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Per-vcpu notification handling already runs from a per-cpu work item on
the target cpu. Routing that path back through smp_call_function_single()
re-enters the call-function IPI path and executes the notification
handler with interrupts disabled. That makes the framework path unsafe,
since it takes a mutex, allocates memory with GFP_KERNEL, and invokes
client callbacks.
Handle per-vcpu self notifications directly from the existing per-cpu
work item instead. This keeps the per-vcpu path in task context and
avoids the extra IPI hop entirely.
Fixes: 3a3e2b83e8 ("firmware: arm_ffa: Avoid queuing work when running on the worker queue")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-4-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Notification pending interrupts are registered as per-CPU IRQs, but the
driver queues all NPI handling through a single shared work_struct.
That allows queue_work_on() calls from different CPUs to collapse onto a
single pending work item even though the work function uses the CPU it
runs on to fetch and handle per-CPU notifications.
Move notif_pcpu_work into the per-CPU ffa_pcpu_irq state and initialize
one work item per CPU. This keeps NPI handling independent per CPU and
avoids losing notifications when multiple CPUs queue work concurrently.
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-3-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
If the RX buffer allocation fails in ffa_init(), the error path jumps to
free_pages even though no buffer has been allocated yet. Route that case
directly to free_drv_info so the cleanup path is only used after at
least one RX/TX buffer allocation has succeeded.
Fixes: 3bbfe98710 ("firmware: arm_ffa: Add initial Arm FFA driver support")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-2-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
The bus match callback assumes that every FF-A driver provides an
id_table and dereferences it unconditionally. Enforce that contract at
registration time so a buggy client driver cannot crash the bus during
match.
Fixes: 9274307146 ("firmware: arm_ffa: Ensure drivers provide a probe function")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-1-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
The relocated kernel image is copied to its new location using memcpy().
On architectures with separate instruction and data caches, the copied
instructions may remain stale in the instruction cache, leading to the
execution of outdated contents.
Call efi_cache_sync_image() after the relocation copy to ensure the
instruction cache is synchronized with the updated memory contents before
control is transferred to the relocated kernel.
Signed-off-by: WANG Rui <r@hev.cc>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Linus Torvalds
Tudor AmbarusandKrzysztof Kozlowski
WANG RuiandHuacai Chen
Marius HochandArd Biesheuvel
Konrad DybcioandArnd Bergmann
Sudeep Holla
WANG RuiandArd Biesheuvel