This driver supports the Radisys 82600 embedded chipset, which was used with
Pentium III-era CPUs. It is highly unlikely that it is still used. Besides
its own documentation, the only information I was able to find about the
R82600, after looking through many pages of Google results, was that it was
used in a Nokia 2G GSM base station.
The original author said:
"This was after Bluesmoke (watch was out-of-tree), and was pay of the first
set of in tree edac drivers (a fresh design as far as I remember).
This particular driver did apparently get used by Akamai quite heavily and
widely but all ancient history now. The Radisys r82600 edac driver
r82600_edac.c was closely related hardware from the same era, and can probably
go too (although being embedded hardware, it's possible its production
lifespan was considerably longer).
Tim."
Mail is
https://lore.kernel.org/r/01BCCA37-F6A2-458B-BFE7-99C7724CDDEA@buttersideup.com
but lkml drops html mail so quoting the relevant info here too.
[ bp: Massage and extend commit message. ]
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260130052633.13119-1-enelsonmoore@gmail.com
The history of this driver is pretty amusing. It was marked broken in
2007 in
28f96eeafc ("drivers/edac-new-i82443bxgz-mc-driver: mark as broken").
It was then fixed in 2008 in
53a2fe5804 ("edac: make i82443bxgx_edac coexist with intel_agp"),
but the dependency on BROKEN was never removed. Given that this was never
fixed in the last ~18 years, it is obvious there is no demand for this driver.
Remove it and move the former maintainer to the CREDITS file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260129082937.48740-1-enelsonmoore@gmail.com
Intel Diamond Rapids CPUs include Integrated Memory and I/O Hubs (IMH).
The memory controllers within the IMHs provide memory stacks to the
processor. Create a new driver for this IMH-based memory controllers
rather than applying additional patches to the existing i10nm_edac.c
for the following reasons:
1) The memory controllers are not presented as PCI devices; instead,
the detection and all their registers have been transitioned to
MMIO-based memory spaces.
2) Validation processes are costly. Modifications to i10nm_edac would
require extensive validation checks against multiple platforms,
including Ice Lake, Sapphire Rapids, Emerald Rapids, Granite Rapids,
Sierra Forest, and Grand Ridge.
3) Future Intel CPUs will likely only need patches on top of this new
EDAC driver. Validation can be limited to Diamond Rapids servers
and future Intel CPU generations.
[Tony: Fix kerneldoc for struct local_reg]
[randconfig: Added dependencies on NFIT and DMI]
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-5-qiuxu.zhuo@intel.com
Add a driver for the AMD Versal NET DDR memory controller which supports
single bit error correction, double bit error detection and other system
errors from various IP subsystems (e.g., RPU, NOCs, HNICX, PL).
The driver listens for notifications from the NMC (Network management
controller) using RPMsg (Remote Processor Messaging).
The channel used for communicating to RPMsg is named "error_edac". Upon
receipt of a notification, the driver sends a RAS event trace.
[ bp:
- Fixup title
- Rewrite commit message
- Fixup Kconfig text
- Zap unused defines and align them
- Simplify rpmsg_cb() considerably
- Drop silly double-brackets in conditionals
- Use proper void * type in mcdi_request()
- Do not clear chinfo in rpmsg_probe() unnecessarily
- Fix indentation
- Do a proper err unwind path in init_versalnet()
- Redo the error unwind path in mc_probe() properly
- Fix the ordering in mc_remove()
]
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250908115649.22903-1-shubhrajyoti.datta@amd.com
Link: https://lore.kernel.org/r/20250703173105.GLaGa-WQCESDNsqygm@fat_crate.local
Add a generic EDAC memory repair control driver to manage memory repairs in
the system, such as CXL Post Package Repair (PPR) and other soft and hard PPR
features.
For example, a CXL device with DRAM components that support PPR features may
implement PPR maintenance operations. DRAM components may support two types of
PPR:
- hard PPR, for a permanent row repair, and
- soft PPR, for a temporary row repair.
Soft PPR is much faster than hard PPR, but the repair is lost with a power
cycle.
When a CXL device detects an error in a memory, it may report the need for
a repair maintenance operation by using an event record where the "maintenance
needed" flag is set. The event records contain the device physical
address (DPA) and other optional attributes of the memory to repair.
The kernel will report the corresponding CXL general media or DRAM trace event
to userspace, and userspace tools (e.g. rasdaemon) will initiate a repair
operation in response to the device request via the sysfs repair control.
Device with memory repair features registers with EDAC device driver, which
retrieves a memory repair descriptor from EDAC memory repair driver and exposes
the sysfs repair control attributes to userspace in
/sys/bus/edac/devices/<dev-name>/mem_repairX/.
The common memory repair control interface abstracts the control of arbitrary
memory repair functionality into a standardized set of functions. The sysfs
memory repair attribute nodes are only available if the client driver has
implemented the corresponding attribute callback function and provided
operations to the EDAC device driver during registration.
[ bp: Massage, fixup edac_dev_register() retvals, merge
write_overflow fix to mem_repair_create_desc() ]
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250212143654.1893-5-shiju.jose@huawei.com
Add an Error Check Scrub (ECS) control to manage a memory device's ECS
feature.
The ECS is a feature defined in JEDEC DDR5 SDRAM Specification (JESD79-5) and
allows the DRAM to internally read, correct single-bit errors, and write back
corrected data bits to the DRAM array while providing transparency to error
counts.
The DDR5 device contains a number of memory media Field Replaceable Units
(FRU) per device. The DDR5 ECS feature and thus the ECS control driver
supports configuring the ECS parameters per FRU.
Memory devices support the ECS feature register with the EDAC device driver,
which retrieves the ECS descriptor from the EDAC ECS driver. This driver
exposes sysfs ECS control attributes to userspace via
/sys/bus/edac/devices/<dev-name>/ecs_fruX/.
The common sysfs ECS control interface abstracts the control of an arbitrary
ECS functionality to a common set of functions.
Support for the ECS feature is added separately because the control attributes
of the DDR5 ECS feature differ from those of the scrub feature.
The sysfs ECS attribute nodes are only present if the client driver has
implemented the corresponding attribute callback function and passed the
necessary operations to the EDAC RAS feature driver during registration.
[ bp: Massage, fixup edac_dev_register() retvals. ]
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/20250212143654.1893-4-shiju.jose@huawei.com
Add a scrub control to manage memory scrubbers in the system.
Devices with a scrub feature register with the EDAC device driver which
retrieves the scrub descriptor from the scrub driver and exposes the
control attributes for a instance to userspace at
/sys/bus/edac/devices/<dev-name>/scrubX/.
The common sysfs scrub control interface abstracts the control of
arbitrary scrubbing functionality into a common set of functions. The
attribute nodes are only present if the client driver has implemented
the corresponding attribute callback function and passed the operations
to the device driver during registration.
[ bp: Massage commit message, docs and code, simplify text a bit.
Integrate fixup for: https://lore.kernel.org/r/202502251009.0sGkolEJ-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> ]
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Daniel Ferguson <danielf@os.amperecomputing.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/20250212143654.1893-3-shiju.jose@huawei.com
Since
47d13a269b ("powerpc/40x: Remove 40x platforms.")
support for PPC40x platforms has been removed. While the EDAC driver also
mentions PPC440 and PPC460 processors, the driver refuses to probe on anything
other than PPC405. It's unlikely support will ever be added at this point for
these other old platforms, so the driver can be removed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20240904192224.3060307-2-robh@kernel.org
Commit 598afa0504 ("kbuild: warn objects shared among multiple modules")
was added to track down cases where the same object is linked into
multiple modules. This can cause serious problems if some modules are
builtin while others are not.
That test triggers this warning:
scripts/Makefile.build:236: drivers/edac/Makefile: skx_common.o is added to multiple modules: i10nm_edac skx_edac
Make this a separate module instead.
[Tony: Added more background details to commit message]
Fixes: d4dc89d069 ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20240529095132.1929397-1-arnd@kernel.org/
Add EDAC support for Xilinx ZynqMP OCM Controller, so this driver reports CE and
UE errors upon interrupt generation. Also add debugfs files for error injection.
On Xilinx ZynqMP platform, both OCM Controller driver(zynqmp_edac) and DDR
Memory Controller driver(synopsys_edac) co-exist which means both can be loaded
at a time. This scenario is tested on Xilinx ZynqMP platform.
Fix following issue reported by the robot:
"MAINTAINERS references a file that doesn't exist:
Documentation/devicetree/bindings/edac/xlnx,zynqmp-ocmc.yaml"
[ bp:
- Massage commit message
- s/EDAC_ZYNQMP_OCM/EDAC_ZYNQMP/
- Touchups
]
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230104084512.1855243-3-sai.krishna.potthuri@amd.com
There's no need for them to be in a separate file so merge them into the
main driver compilation unit like the other EDAC drivers do.
Drop now-unneeded function export, make the function static and shorten
static function names.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20201215110517.5215-1-bp@alien8.de
The mv64x60 EDAC driver depends on CONFIG_MV64X60. But that symbol is
not user-selectable, and the last code that selected it was removed
with the C2K board support in 2018, see:
92c8c16f34 ("powerpc/embedded6xx: Remove C2K board support")
That means the driver is now dead code, so remove it.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201207040253.628528-1-mpe@ellerman.id.au
This driver supports Intel client SoC with integrated memory controller
using In-Band ECC(IBECC). The memory correctable and uncorrectable errors
are reported via NMIs. The driver handles the NMIs and decodes the memory
error address to platform specific address. The first IBECC-supported SoC
is Elkhart Lake.
[Tony: s/#include <linux/nmi.h>/#include <asm/nmi.h>/ to fix randconfig build]
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The Amazon's Annapurna Labs Memory Controller EDAC supports ECC capability
for error detection and correction (Single bit error correction, Double
detection). This driver introduces EDAC driver for that capability.
[ bp: Remove "EDAC" string from Kconfig tristate as it is redundant. ]
Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lkml.kernel.org/r/20200816185551.19108-3-talel@amazon.com
Pull ARM updates from Russell King:
- fix various clang build and cppcheck issues
- switch ARM to use new common outgoing-CPU-notification code
- add some additional explanation about the boot code
- kbuild "make clean" fixes
- get rid of another "(____ptrval____)", this time for the VDSO code
- avoid treating cache maintenance faults as a write
- add a frame pointer unwinder implementation for clang
- add EDAC support for Aurora L2 cache
- improve robustness of adjust_lowmem_bounds() finding the bounds of
lowmem.
- add reset control for AMBA primecell devices
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits)
ARM: 8906/1: drivers/amba: add reset control to amba bus probe
ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer
ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary
ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address
ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs
ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC
ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper
ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora
ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding
ARM: 8886/1: l2x0: support parity-enable/disable on aurora
ARM: 8885/1: aurora-l2: add defines for parity and ECC registers
ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE
ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware
ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang
ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes
ARM: 8896/1: VDSO: Don't leak kernel addresses
ARM: 8895/1: visit mach-* and plat-* directories when cleaning
ARM: 8894/1: boot: Replace open-coded nop with macro
ARM: 8893/1: boot: Explain the 8 nops
ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE
...
Add support for the ECC functionality as found in the DDR RAM and L2
cache controllers on the MV78230/MV78x60 SoCs. This driver has been
tested on the MV78460 (on a custom board with a DDR3 ECC DIMM).
[cp use SPDX license]
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Ethan Nelson-Moore
Qiuxu Zhuo
Shubhrajyoti Datta
Sascha Hauer
Shiju Jose
Michael Ellerman
Zhao Qunqin
Rob Herring (Arm)
Arnd Bergmann
Marvin Lin
Sai Krishna Potthuri
Borislav Petkov
Talel Shenhar
Lei Wang
Linus Torvalds
Jan Luebbe