Add support for SpacemiT K1 PDMA controller which features 64-bit
addressing capabilities.
The SpacemiT K1 PDMA extends the descriptor format with additional
32-bit words for high address bits, enabling access to memory beyond
4GB boundaries. The new spacemit_k1_pdma_ops provides necessary 64-bit
address handling functions and k1 specific controller configurations.
Key changes:
- Add ARCH_SPACEMIT dependency to Kconfig
- Define new high 32-bit address registers (DDADRH, DSADRH, DTADRH)
- Add DCSR_LPAEEN bit for Long Physical Address Extension Enable
- Implement 64-bit operations for SpacemiT K1 PDMA
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250822-working_dma_0701_v2-v5-5-f5c0eda734cc@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-9-0e6f9cb512c1@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Adds driver to enable PCIe board which uses AMD QDMA (the Queue-based
Direct Memory Access) subsystem. For example, Xilinx Alveo V70 AI
Accelerator devices.
https://www.xilinx.com/applications/data-center/v70.html
The QDMA subsystem is used in conjunction with the PCI Express IP block
to provide high performance data transfer between host memory and the
card's DMA subsystem.
+-------+ +-------+ +-----------+
PCIe | | | | | |
Tx/Rx | | | | AXI | |
<=======> | PCIE | <===> | QDMA | <====>| User Logic|
| | | | | |
+-------+ +-------+ +-----------+
The primary mechanism to transfer data using the QDMA is for the QDMA
engine to operate on instructions (descriptors) provided by the host
operating system. Using the descriptors, the QDMA can move data in both
the Host to Card (H2C) direction, or the Card to Host (C2H) direction.
The QDMA provides a per-queue basis option whether DMA traffic goes
to an AXI4 memory map (MM) interface or to an AXI4-Stream interface.
The hardware detail is provided by
https://docs.xilinx.com/r/en-US/pg302-qdma
Implements dmaengine APIs to support MM DMA transfers.
- probe the available DMA channels
- use dma_slave_map for channel lookup
- use virtual channel to manage dmaengine tx descriptors
- implement device_prep_slave_sg callback to handle host scatter gather
list
Signed-off-by: Nishad Saraf <nishads@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20240819211948.688786-2-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
Kbuild does not support having a source file compiled multiple times
and linked into distinct modules, or built-in and modular at the
same time. For fs-edma, there are two common components that are
linked into the fsl-edma.ko for Arm and PowerPC, plus the mcf-edma.ko
module on Coldfire. This violates the rule for compile-testing:
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is added to multiple modules: fsl-edma mcf-edma
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added to multiple modules: fsl-edma mcf-edma
I tried splitting out the common parts into a separate modules, but
that adds back the complexity that a cleanup patch removed, and it
gets harder with the addition of the tracepoints.
As a minimal workaround, address it at the Kconfig level, by disallowing
the broken configurations.
Link: https://lore.kernel.org/lkml/20240110232255.1099757-1-arnd@kernel.org/
Fixes: 66aac8ea0a ("dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240528115440.2965975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit e39a2329cf ("Kconfig: Allow k3dma driver to be selected for
more then HISI3xx platforms") expanded the "depends on" line of K3_DMA
from "ARCH_HI3xxx" to "ARCH_HI3xxx || ARCH_HISI || COMPILE_TEST".
However, ARCH_HI3xxx implies ARCH_HISI, so it's unnecessary to list
both.
Instead, just list ARCH_HISI, which covers all HiSilicon platforms.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230924152332.2254305-1-j.neuschaefer@gmx.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
