Previously, non-generic attributes (polling_interval, timer) used separate
create/delete logic, leading to race conditions during concurrent access in
creation/deletion. Multi-threaded operations also caused inconsistencies
between governor capabilities and attribute states.
1.Use is_visible + sysfs_update_group() to unify management of these
attributes, eliminating creation/deletion races.
2.Add locks and validation to these attributes, ensuring consistency
between current governor capabilities and attribute operations in
multi-threaded environments.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://www.spinics.net/lists/kernel/msg5967745.html
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
Like many other Rockchip drivers, rockchip-dfi brings with it its own
HIWORD_UPDATE macro. This variant doesn't shift the value (and like the
others, doesn't do any checking).
Remove it, and replace instances of it with hw_bitfield.h's
FIELD_PREP_WM16. Since FIELD_PREP_WM16 requires contiguous masks and
shifts the value for us, some reshuffling of definitions needs to
happen.
This gives us better compile-time error checking, and in my opinion,
nicer code.
Tested on an RK3568 ODROID-M1 board (LPDDR4X at 1560 MHz, an RK3588
Radxa ROCK 5B board (LPDDR4X at 2112 MHz) and an RK3588 Radxa ROCK 5T
board (LPDDR5 at 2400 MHz). perf measurements were consistent with the
measurements of stress-ng --stream in all cases.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
The Rockchip RK3588 SoC can also support LPDDR5 memory. This type of
memory needs some special case handling in the rockchip-dfi driver.
Add support for it in rockchip-dfi, as well as the needed GRF register
definitions.
This has been tested as returning both the right cycle count and
bandwidth on a LPDDR5 board where the CKR bit is 1. I couldn't test
whether the values are correct on a system where CKR is 0, as I'm not
savvy enough with the Rockchip tooling to know whether this can be set
in the DDR init blob.
Downstream has some special case handling for a hardware version where
not just the control bits differ, but also the register. Since I don't
know whether that hardware version is in any production silicon, it's
left unimplemented for now, with an error message urging users to report
if they have such a system.
There is a slight change of behaviour for non-LPDDR5 systems: instead of
writing 0 as the control flags to the control register and pretending
everything is alright if the memory type is unknown, we now explicitly
return an error.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/20250530-rk3588-dfi-improvements-v1-2-6e077c243a95@collabora.com/
On RK3588 with LPDDR4X memory, the cycle count as returned by
perf stat -a -e rockchip_ddr/cycles/ sleep 1
consistently reads half as much as what the actual DDR frequency is at.
For a LPDDR4X module running at 2112MHz, I get more like 1056059916
cycles per second, which is almost bang-on half what it should be. No,
I'm not mixing up megatransfers and megahertz.
Consulting the downstream driver, this appears to be because the RK3588
hardware specifically (and RK3528 as well, for future reference) needs a
multiplier of 2 to get to the correct frequency with everything but
LPDDR5.
The RK3588's actual memory bandwidth measurements in MB/s are correct
however, as confirmed with stress-ng --stream. This makes me think the
access counters are not affected in the same way. This tracks with the
vendor kernel not multiplying the access counts either.
Solve this by adding a new member to the dfi struct, which each SoC can
set to whatever they want, but defaults to 1 if left unset by the SoC
init functions. The event_get_count op can then use this multiplier if
the cycle count is requested.
The cycle multiplier is not used in rockchip_dfi_get_event because the
vendor driver doesn't use it there either, and we don't do other actual
bandwidth unit conversion stuff in there anyway.
Fixes: 481d97ba61 ("PM / devfreq: rockchip-dfi: add support for RK3588")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250530-rk3588-dfi-improvements-v1-1-6e077c243a95@collabora.com/
Add the HiSilicon uncore frequency scaling driver for Kunpeng SoCs based on
the devfreq framework. The uncore domain contains shared computing
resources, including system interconnects and L3 cache. The uncore
frequency significantly impacts the system-wide performance as well as
power consumption. This driver adds support for runtime management of
uncore frequency from kernel and userspace. The main function includes
setting and getting frequencies, changing frequency scaling policies, and
querying the list of CPUs whose performance is significantly related to
this uncore frequency domain, etc. The driver communicates with a platform
controller through an ACPI PCC mailbox to take the actual actions of
frequency scaling.
Co-developed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/20250623143401.4095045-3-zhanjie9@hisilicon.com/
Commit 96ffcdf239 ("PM / devfreq: Remove redundant governor_name from
struct devfreq") removes governor_name and uses governor->name to replace
it. But devfreq->governor may be NULL and directly using
devfreq->governor->name may cause null pointer exception. Move the check of
governor to before using governor->name.
Fixes: 96ffcdf239 ("PM / devfreq: Remove redundant governor_name from struct devfreq")
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://lore.kernel.org/lkml/20250421030020.3108405-5-zhenglifeng1@huawei.com/
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Merge devfreq updates for 6.14 from Chanwoo Choi:
"- Call of_node_put() only once in devfreq_event_get_edev_by_phandle()
on devfreq-event.c
- Remove unused function parameter of exynos_bus_parse_of() on
exynos-bus.c"
* tag 'devfreq-next-for-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: exynos: remove unused function parameter
PM / devfreq: event: Call of_node_put() only once in devfreq_event_get_edev_by_phandle()
