during entropy evaluation, if the generated samples fail
any statistical test, then, all of the bits will be discarded,
and a second set of samples will be generated and tested.
the entropy delay interval should be doubled before performing the
retry.
also, ctrlpriv->rng4_sh_init and inst_handles both reads RNG DRNG
status register, but only inst_handles is updated before every retry.
so only check inst_handles and removing ctrlpriv->rng4_sh_init
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the Makefile, the new build option CONFIG_CAAM_QI is defined conditioned
on the existence of the CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI, which is
properly defined in the Kconfig file. So, CONFIG_CAAM_QI is just a local
alias for CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI.
There is little benefit in the source code of having this slightly shorter
alias for this configuration, but it complicates further maintenance, as
searching for the impact of CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
requires to grep once, and then identify the option introduced and continue
searching for that. Further, tools, such as cross referencers, and scripts
to check Kconfig definitions and their use simply do not handle this
situation. Given that this is the only incidence of such a config alias in
the whole kernel tree, just prefer to avoid this pattern of aliasing here.
Use CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI throughout the Freescale
CAAM-Multicore platform driver backend source code.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The iMX8QXP (and variants such as the QX, DX, DXP) all identify as iMX8QXP.
They have the exact same restrictions as the supported iMX8QM introduced
at commit 61bb8db6f6 ("crypto: caam - Add support for i.MX8QM")
Loosen the check a little bit with a wildcard to also match the iMX8QXP
and its variants.
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the CAAM on these SoCs is managed by another ARM core, called the
SECO (Security Controller) on iMX8QM and Secure Enclave on iMX8ULP, which
also reserves access to register page 0 suspend operations cannot touch
this page.
This is similar to when running OPTEE, where OPTEE will reserve page 0.
Track this situation using a new state variable no_page0, reflecting if
page 0 is reserved elsewhere, either by other management cores in SoC or
by OPTEE.
Replace the optee_en check in suspend/resume with the new check.
optee_en cannot go away as it's needed elsewhere to gate OPTEE specific
situations.
Fixes the following splat at suspend:
Internal error: synchronous external abort: 0000000096000010 [#1] SMP
Hardware name: Freescale i.MX8QXP ACU6C (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : readl+0x0/0x18
lr : rd_reg32+0x18/0x3c
sp : ffffffc08192ba20
x29: ffffffc08192ba20 x28: ffffff8025190000 x27: 0000000000000000
x26: ffffffc0808ae808 x25: ffffffc080922338 x24: ffffff8020e89090
x23: 0000000000000000 x22: ffffffc080922000 x21: ffffff8020e89010
x20: ffffffc080387ef8 x19: ffffff8020e89010 x18: 000000005d8000d5
x17: 0000000030f35963 x16: 000000008f785f3f x15: 000000003b8ef57c
x14: 00000000c418aef8 x13: 00000000f5fea526 x12: 0000000000000001
x11: 0000000000000002 x10: 0000000000000001 x9 : 0000000000000000
x8 : ffffff8025190870 x7 : ffffff8021726880 x6 : 0000000000000002
x5 : ffffff80217268f0 x4 : ffffff8021726880 x3 : ffffffc081200000
x2 : 0000000000000001 x1 : ffffff8020e89010 x0 : ffffffc081200004
Call trace:
readl+0x0/0x18
caam_ctrl_suspend+0x30/0xdc
dpm_run_callback.constprop.0+0x24/0x5c
device_suspend+0x170/0x2e8
dpm_suspend+0xa0/0x104
dpm_suspend_start+0x48/0x50
suspend_devices_and_enter+0x7c/0x45c
pm_suspend+0x148/0x160
state_store+0xb4/0xf8
kobj_attr_store+0x14/0x24
sysfs_kf_write+0x38/0x48
kernfs_fop_write_iter+0xb4/0x178
vfs_write+0x118/0x178
ksys_write+0x6c/0xd0
__arm64_sys_write+0x14/0x1c
invoke_syscall.constprop.0+0x64/0xb0
do_el0_svc+0x90/0xb0
el0_svc+0x18/0x44
el0t_64_sync_handler+0x88/0x124
el0t_64_sync+0x150/0x154
Code: 88dffc21 88dffc21 5ac00800 d65f03c0 (b9400000)
Fixes: d2835701d9 ("crypto: caam - i.MX8ULP donot have CAAM page0 access")
Cc: stable@kernel.org # v6.10+
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On i.MX8QM, caam clocks are turned on automatically and Linux does not have
access to the caam controller's register page, so skip clocks
initialization.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
iMX8ULP have a secure-enclave hardware IP called EdgeLock Enclave(ELE),
that control access to caam controller's register page, i.e., page0.
At all, if the ELE release access to CAAM controller's register page,
it will release to secure-world only.
Clocks are turned on automatically for iMX8ULP. There exists the caam
clock gating bit, but it is not advised to gate the clock at linux, as
optee-os or any other entity might be using it.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAAM clock initializat is done based on the basis of soc specific
info stored in struct caam_imx_data:
- caam-page0-access flag
- num_clks
CAAM driver needs to be aware of access rights to CAAM control page
i.e., page0, to do things differently.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The newly added PM operations use the deprecated SIMPLE_DEV_PM_OPS() macro,
causing a warning in some configurations:
drivers/crypto/caam/ctrl.c:828:12: error: 'caam_ctrl_resume' defined but not used [-Werror=unused-function]
828 | static int caam_ctrl_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/crypto/caam/ctrl.c:818:12: error: 'caam_ctrl_suspend' defined but not used [-Werror=unused-function]
818 | static int caam_ctrl_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:732:12: error: 'caam_jr_resume' defined but not used [-Werror=unused-function]
732 | static int caam_jr_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:687:12: error: 'caam_jr_suspend' defined but not used [-Werror=unused-function]
687 | static int caam_jr_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~
Use the normal DEFINE_SIMPLE_DEV_PM_OPS() variant now, and use pm_ptr() to
completely eliminate the structure in configs without CONFIG_PM.
Fixes: 322d74752c ("crypto: caam - add power management support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for suspend and resume operation for PM in CAAM driver.
When the CAAM goes in suspend, the hardware is considered to do nothing.
On some platforms, the power of the CAAM is not turned off so it keeps
its configuration.
On other platforms, it doesn't so it is necessary to save the state of
the CAAM:
- JRs MID
- Address of input and output rings
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
TRNG "sample size" (the total number of entropy samples that will be taken
during entropy generation) default / POR value is very conservatively
set to 2500.
Let's set it to 512, the same as the caam driver in U-boot
(drivers/crypto/fsl_caam.c) does.
This solves the issue of RNG performance dropping after a suspend/resume
cycle on parts where caam loses power, since the initial U-boot setttings
are lost and kernel does not restore them when resuming.
Note: when changing the sample size, the self-test parameters need to be
updated accordingly.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since, CAAM driver is probed before soc_device_attribute done as part of:
- drivers/soc/imx/soc-imx8m.c (for i.MX8M)
- drivers/firmware/imx/ele_mu.c (EdgeLock Enclave kernel driver, for i.MX8ULP)
It is needed to return -EPROBE_DEFER, after calling soc_device_match() in
drivers/crypto/caam/ctrl.c.
soc_device_match returns NULL for:
- i.MX8M
- i.MX8ULP,
can be considered that the SoC device has not been probed yet.
Hence, it returns -EPROBE_DEFER directly.
caam: imx: change to use of_match_node in run_descriptor_deco0
Providing imx8m_machine_match to match:
- i.MX8M{Q,M,N,P},
- i.MX8ULP,
so as to start using of_match_node, to simplify the code.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam driver needs to be aware of OP-TEE f/w presence, since some things
are done differently:
1. there is no access to controller's register page (note however that
some registers are aliased in job rings' register pages)
2 Due to this, MCFGR[PS] cannot be read and driver assumes
MCFGR[PS] = b'0 - engine using 32-bit address pointers.
This is in sync with the fact that:
-all i.MX SoCs currently use MCFGR[PS] = b'0
-only i.MX OP-TEE use cases don't allow access to controller register page
Signed-off-by: Horia GeantA <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to the comment at the end of the 'for' loop just a few lines
below, it looks needed to clear 'desc'.
So it should also be cleared for the first iteration.
Move the memset() to the beginning of the loop to be safe.
Fixes: 281922a1d4 ("crypto: caam - add support for SEC v5.x RNG4")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GFP_DMA does not guarantee that the returned memory is aligned
for DMA. It should be removed where it is superfluous.
However, kmalloc may start returning DMA-unaligned memory in future
so fix this by adding the alignment by hand.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
Depending on SoC variant, a CAAM may be available, but with some futures
fused out. The LS1028A (non-E) SoC is one such SoC and while it
indicates BLOB support, BLOB operations will ultimately fail, because
there is no AES support. Add a new blob_present member to reflect
whether both BLOB support and the AES support it depends on is
available.
These will be used in a follow-up commit to allow blob driver
initialization to error out on SoCs without the necessary hardware
support instead of failing at runtime with a cryptic
caam_jr 8020000.jr: 20000b0f: CCB: desc idx 11: : Invalid CHA selected.
Co-developed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E)
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Since commit 358ba762d9 ("crypto: caam - enable prediction resistance
in HRWNG") the following CAAM errors can be seen on i.MX6SX:
caam_jr 2101000.jr: 20003c5b: CCB: desc idx 60: RNG: Hardware error
hwrng: no data available
This error is due to an incorrect entropy delay for i.MX6SX.
Fix it by increasing the minimum entropy delay for i.MX6SX
as done in U-Boot:
https://patchwork.ozlabs.org/project/uboot/patch/20220415111049.2565744-1-gaurav.jain@nxp.com/
As explained in the U-Boot patch:
"RNG self tests are run to determine the correct entropy delay.
Such tests are executed with different voltages and temperatures to identify
the worst case value for the entropy delay. For i.MX6SX, it was determined
that after adding a margin value of 1000 the minimum entropy delay should be
at least 12000."
Cc: <stable@vger.kernel.org>
Fixes: 358ba762d9 ("crypto: caam - enable prediction resistance in HRWNG")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Gaurav JainandHerbert Xu
Zhang EnpeiandHerbert Xu
Lukas BulwahnandHerbert Xu
John ErnbergandHerbert Xu
Thomas RichardandHerbert Xu
Breno LeitaoandJakub Kicinski
Pankaj GuptaandHerbert Xu
Linus Torvalds
Rob HerringandHerbert Xu
Arnd BergmannandHerbert Xu
Horia GeantaandHerbert Xu
Meenakshi AggarwalandHerbert Xu
Victoria MilhoanandHerbert Xu
Christophe JAILLETandHerbert Xu
Ahmad FatoumandJarkko Sakkinen
Fabio EstevamandHerbert Xu