Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
Recently, when testing 10-bit dsi C-PHY panel, clks are different
from the usual. (dsi0_phy_pll_out_dsiclk's parent is dsi0_pll_bit_clk
now (dsiclk_sel = 0)) And we failed to set dsiclk's children.
dsi_link_clk_set_rate_6g: Set clk rates: pclk=172992000, byteclk=108120000
byteclk was set first to 108120000, so the vco rate was set to
108120000 * 7 * 1 * 1 = 756840000. When we was trying to set
172992000 on mdss_pixel_clk_src later.
Since there was no matched ratio, we failed to set it. And dsiclk
divider ratio was set to 15:1 (wrong cached register value 0xf and
didn't update), we finally got 50455997, apparently wrong.
dsi0vco_clk 1 1 0 756839941
dsi0_pll_out_div_clk 1 1 0 756839941
dsi0_pll_post_out_div_clk 0 0 0 216239983
dsi0_pll_bit_clk 2 2 0 756839941
dsi0_phy_pll_out_dsiclk 2 2 0 50455997
disp_cc_mdss_pclk1_clk_src 1 1 0 50455997
dsi0_pll_by_2_bit_clk 0 0 0 378419970
dsi0_phy_pll_out_byteclk 2 2 0 108119991
disp_cc_mdss_byte1_clk_src 2 2 0 108119991
Downstream clk_summary shows the mdss_pixel_clk_src support the
ratio(35:16)
dsi0_phy_pll_out_dsiclk 2 2 0 378420000
disp_cc_mdss_pclk1_clk_src 1 1 0 172992000
dsi0_phy_pll_out_byteclk 2 2 0 108120000
disp_cc_mdss_byte1_clk_src 2 2 0 108120000
After checking downstream source, 15:4 also seems to be supported,
add them two.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260321095029.2259489-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The XO clock source is always-on in hardware and cannot be gated.
Without CLK_IS_CRITICAL, runtime PM of downstream consumers (such as
the CMN PLL driver) cascades a disable up to gcc_xo_clk_src, causing
a branch status timeout warning.
The IPQ8074 GCC driver already marks this clock as CLK_IS_CRITICAL.
Apply the same fix to IPQ6018.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311182147.30266-1-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
mdss_gdsc can get stuck on boot due to RCGs being left on from last boot.
As a fix, commit 01a0a6cc8c ("clk: qcom: Park shared RCGs upon
registration") introduced a callback to ensure the RCG is off upon init.
However, the fix depends on all shared RCGs being marked as such in code.
For SM8150/SC8180X/SM8250 the MDSS vsync clock was using regular ops,
unlike the same clock in the SC7180 code. This was causing display to
frequently fail to initialize after rebooting on the Surface Pro X.
Fix by using shared ops for this clock.
Fixes: 80a18f4a85 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312112321.370983-8-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As the PCIe host controller driver does not yet support dealing with the
loss of state during suspend, use retention for relevant GDSCs.
This fixes the link not surviving upon resume:
nvme 0002:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS read failed (134)
nvme 0002:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
nvme nvme0: Disabling device after reset failure: -19
Fixes: 4433594bbe ("clk: qcom: gcc: Add global clock controller driver for SC8180x")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20260312112321.370983-5-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Linus Torvalds
Stephen Boyd
Taniya Das
Prasanna Tolety
Jagadeesh Kona
Krzysztof Kozlowski
Konrad Dybcio
John Crispin
Vladimir Zapolskiy
Abel Vesa
Pengyu Luo
Val Packett