Pull driver core fixes from Danilo Krummrich:
- Prevent a device from being probed before device_add() has finished
initializing it; gate probe with a "ready_to_probe" device flag to
avoid races with concurrent driver_register() calls
- Fix a kernel-doc warning for DEV_FLAG_COUNT introduced by the above
- Return -ENOTCONN from software_node_get_reference_args() when a
referenced software node is known but not yet registered, allowing
callers to defer probe
- In sysfs_group_attrs_change_owner(), also check is_visible_const();
missed when the const variant was introduced
* tag 'driver-core-7.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: Add kernel-doc for DEV_FLAG_COUNT enum value
sysfs: attribute_group: Respect is_visible_const() when changing owner
software node: return -ENOTCONN when referenced swnode is not registered yet
driver core: Don't let a device probe until it's ready
It's possible that at the time of resolving a reference to a remote
software node, the node we know exists is not yet registered as a full
firmware node. We currently return -ENOENT in this case but the same
error code is also returned in some other cases, like the reference
property with given name not existing in the property list of the local
software node.
It makes sense to let users know that we're dealing with an unregistered
software node so that they can defer probe - the situation is somewhat
similar to there existing a firmware node to which no device is bound
yet - which is valid grounds for probe deferral. To that end: use
-ENOTCONN to indicate the software node is "not connected".
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407-swnode-unreg-retcode-v4-1-1b2f0725eb9c@oss.qualcomm.com
[ Drop software node backend specifics from
fwnode_property_get_reference_args() documentation. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
At the moment software nodes can only reference other software nodes.
This is a limitation for devices created, for instance, on the auxiliary
bus with a dynamic software node attached which cannot reference devices
the firmware node of which is "real" (as an OF node or otherwise).
Make it possible for a software node to reference all firmware nodes in
addition to static software nodes. To that end: add a second pointer to
struct software_node_ref_args of type struct fwnode_handle. The core
swnode code will first check the swnode pointer and if it's NULL, it
will assume the fwnode pointer should be set.
Software node graphs remain the same, as in: the remote endpoints still
have to be software nodes.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The fwnode/device property API currently implement
(fwnode|device)_property_read_bool() with (fwnode|device)_property_present().
That does not allow having different behavior depending on the backend.
Specifically, the usage of (fwnode|device)_property_read_bool() on
non-boolean properties is deprecated on DT. In order to add a warning
on this deprecated use, these 2 APIs need separate ops for the backend.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250109-dt-type-warnings-v1-1-0150e32e716c@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
nargs_prop refers to a property located in the reference that is found
within the nargs property. Use the correct reference node in call to
property_entry_read_int_array() to retrieve the correct nargs value.
Fixes: b06184acf7 ("software node: Add software_node_get_reference_args()")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Split software_node_notify_remove) out of software_node_notify()
and make device_platform_notify() call the latter on device addition
and the former on device removal.
While at it, put the headers of the above functions into base.h,
because they don't need to be present in a global header file.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The function software_node_notify() - the function that creates
and removes the symlinks between the node and the device - was
called unconditionally in device_add_software_node() and
device_remove_software_node(), but it needs to be called in
those functions only in the special case where the node is
added to a device that has already been registered.
This fixes NULL pointer dereference that happens if
device_remove_software_node() is used with device that was
never registered.
Fixes: b622b24519 ("software node: Allow node addition to already existing device")
Reported-and-tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
