After acpi_init_device_object(), the lifetime of struct acpi_device is
managed by the driver core through reference counting.
Both acpi_add_power_resource() and acpi_add_single_object() call
acpi_init_device_object() and then invoke acpi_device_add(). If that
fails, their error paths call the release callback directly instead of
dropping the device reference through acpi_dev_put().
This bypasses the normal device lifetime rules and frees the object
without releasing the reference acquired by device_initialize(), which
may lead to a refcount leak.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix both error paths by using acpi_dev_put() and let the release
callback handle the final cleanup.
Fixes: 781d737c74 ("ACPI: Drop power resources driver")
Fixes: 718fb0de8f ("ACPI: fix NULL bug for HID/UID string")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260413135343.2884481-1-lgs201920130244@gmail.com
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Commit 02c057ddef ("ACPI: video: Convert the driver to a platform one")
switched over the ACPI video bus driver from an ACPI driver to a platform
driver, but that change introduced an unwanted and unexpected side effect.
Namely, on some systems, the ACPI device object of the ACPI video bus
device is an ACPI companion of multiple platform devices and, after
adding video_device_ids[] as an acpi_match_table to the acpi_video_bus
platform driver, all of those devices started to match that driver and
its probe callback is invoked for all of them (it fails, but it leaves
a confusing message in the log). Moreover, the MODULE_DEVICE_TABLE()
of the ACPI video driver module matches all of the devices sharing the
ACPI companion with the ACPI video bus device.
To address this, make the core ACPI device enumeration code create an
auxiliary device for the ACPI video bus device object instead of a
platform device and switch over the ACPI video bus driver (once more)
to an auxiliary driver.
Auxiliary driver generally is a better match for ACPI video bus than
platform driver, among other things because the ACPI video bus device
does not require any resources to be allocated for it during
enumeration. It also allows the ACPI video bus driver to stop abusing
device matching based on ACPI device IDs and it allows a special case
to be dropped from acpi_create_platform_device() because that function
need not worry about the ACPI video bus device any more.
Fixes: 02c057ddef ("ACPI: video: Convert the driver to a platform one")
Reported-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Closes: https://lore.kernel.org/linux-acpi/007e3390-6b2b-457e-83c7-c794c5952018@amd.com/
Tested-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Added AUXILIARY_BUS selection to CONFIG_ACPI to fix build issue ]
[ rjw: Fixed error path in acpi_create_video_bus_device() ]
Link: https://patch.msgid.link/5986516.DvuYhMxLoT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Merge updates of drivers handling devices defined in the ACPI
specification and other generic devices with ACPI interfaces for
6.20-rc1/7.0-rc1:
- Add a piece of documentation explaining why binding drivers directly
to ACPI device objects is not a good idea in general and why it is
desirable to convert drivers doing so into proper platform drivers
that use struct platform_driver for device binding (Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI device
driver, the generic ACPI button drivers, the generic ACPI thermal
zone driver, the ACPI hardware event device (HED) driver, the ACPI EC
driver, the ACPI SMBUS HC driver, the ACPI Smart Battery Subsystem
(SBS) driver, and the ACPI backlight (video) driver to proper platform
drivers that use struct platform_driver for device binding (Rafael
Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video) driver
to evaluate _ADR instead of evaluating that object directly (Andy
Shevchenko)
* acpi-driver: (25 commits)
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: scan: Clean up after recent changes
ACPI: scan: Use acpi_setup_gpe_for_wake() for buttons
ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM
ACPI: Documentation: driver-api: Disapprove of using ACPI drivers
ACPI: video: Convert the driver to a platform one
ACPI: video: Adjust event notification routine
ACPI: scan: Register platform devices for backlight device objects
ACPI: SBS: Convert the driver to a platform one
ACPI: SMBUS HC: Convert the driver to a platform one
ACPI: EC: Convert the driver to a platform one
ACPI: EC: Register a platform device for ECDT EC
ACPI: HED: Convert the driver to a platform one
ACPI: thermal: Rework system suspend and resume handling
ACPI: thermal: Convert the driver to a platform one
ACPI: thermal: Adjust event notification routine
ACPI: scan: Register platform devices for thermal zones
ACPI: scan: Do not mark button ACPI devices as wakeup-capable
ACPI: scan: Do not bind ACPI drivers to fixed event buttons
ACPI: tiny-power-button: Convert the driver to a platform one
...
The device object rescan in acpi_scan_clear_dep_fn() is scheduled on a
system workqueue which is not guaranteed to be finished before entering
userspace. This may cause some key devices to be missing when userspace
init task tries to find them. Two issues observed on RISCV platforms:
- Kernel panic due to userspace init cannot have an opened
console.
The console device scanning is queued by acpi_scan_clear_dep_queue()
and not finished by the time userspace init process running, thus by
the time userspace init runs, no console is present.
- Entering rescue shell due to the lack of root devices (PCIe nvme in
our case).
Same reason as above, the PCIe host bridge scanning is queued on
a system workqueue and finished after init process runs.
The reason is because both devices (console, PCIe host bridge) depend on
riscv-aplic irqchip to serve their interrupts (console's wired interrupt
and PCI's INTx interrupts). In order to keep the dependency, these
devices are scanned and created after initializing riscv-aplic. The
riscv-aplic is initialized in device_initcall() and a device scan work
is queued via acpi_scan_clear_dep_queue(), which is close to the time
userspace init process is run. Since system_dfl_wq is used in
acpi_scan_clear_dep_queue() with no synchronization, the issues will
happen if userspace init runs before these devices are ready.
The solution is to wait for the queued work to complete before entering
userspace init. One possible way would be to use a dedicated workqueue
instead of system_dfl_wq, and explicitly flush it somewhere in the
initcall stage before entering userspace. Another way is to use
async_schedule_dev_nocall() for scanning these devices. It's designed
for asynchronous initialization and will work in the same way as before
because it's using a dedicated unbound workqueue as well, but the kernel
init code calls async_synchronize_full() right before entering userspace
init which will wait for the work to complete.
Compared to a dedicated workqueue, the second approach is simpler
because the async schedule framework takes care of all of the details.
The ACPI code only needs to focus on its job. A dedicated workqueue for
this could also be redundant because some platforms don't need
acpi_scan_clear_dep_queue() for their device scanning.
Signed-off-by: Yicong Yang <yang.yicong@picoheart.com>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20260128132848.93638-1-yang.yicong@picoheart.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After starting to use platform devices for representing buttons
enumerated via ACPI, acpi_mark_gpe_for_wake() is insufficient for
preparing their GPEs to wake up the system from sleep because it
does not change the "dispatch type" of the given GPE to
ACPI_GPE_DISPATCH_NOTIFY. Subsequently, this causes acpi_enable_gpe()
in __acpi_device_wakeup_enable() to fail and system suspend transitions
to be aborted.
Address this by updating acpi_wakeup_gpe_init() to use
acpi_setup_gpe_for_wake() for buttons like for any other devices.
This allows acpi_setup_gpe_for_wake() to be simplified further because
buttons are not a special case in it any more, so do that as well.
Fixes: 52d8640196 ("ACPI: button: Convert the driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/2259694.irdbgypaU6@rafael.j.wysocki
ACPI device objects associated with backlight interfaces are special
because they are ACPI companions of PCI devices (GPUs), but the
interfaces exposed by them resemble platform device one.
Currently, the ACPI video driver binds to them with the help of a
special "synthetic" device ID regardless of the pairing with the PCI
devices, but since it is generally better to use platform drivers for
handling such interfaces, the plan is to convert that drviver into a
platform one.
However, for this purpose, platform devices corresponding to the
ACPI backlight device objects need to be registered, so update
acpi_bus_attach() to apply the default ACPI enumeration to them
and modify acpi_create_platform_device() to avoid bailing out early
if a "physical" device is already attached to a backlight ACPI device
object.
In addition, update acpi_companion_match() to return a valid struct
acpi_device pointer if the ACPI companion of the given device is a
backlight ACPI device object, which will facilitate driver matching
for platform devices corresponding to those objects.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/5081593.31r3eYUQgx@rafael.j.wysocki
The function acpi_video_get_capabilities() was removed from
drivers/acpi/video_detect.c by commit 87521e16a7 ("acpi-video-detect:
Rewrite backlight interface selection logic") in 2015. At the time,
comments about this function were just removed, and no replacement
seemed to be proposed.
Drop the reference to acpi_video_get_capabilities() here as well.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251230160644.100439-1-Julia.Lawall@inria.fr
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI embedded controller (EC) driver
to a platform one.
After this conversion, acpi_bus_register_early_device() does not need
to attempt to bind an ACPI driver to the struct acpi_device created by
it, so update it accordingly.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Removed excess semicolon ]
Link: https://patch.msgid.link/1946304.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To facilitate converting the ACPI EC driver into a platform one,
modify acpi_bus_register_early_device(), used by acpi_ec_ecdt_start()
for creating a struct acpi_device to represent the "early" EC based
on the ECDT ACPI table, to carry out the default ACPI enumeration for
the given device which will cause a platform device to be registered
for it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2397353.ElGaqSPkdT@rafael.j.wysocki
Currently, platform devices are not registered for ACPI thermal zones
because they are not represented as device objects in the ACPI namespace.
Instead, they are represented as thermal zone objects, so in particular
the platform_id flag is not set for them during enumeration because it
is only set for objects of type ACPI_BUS_TYPE_DEVICE, but otherwise they
are handled similarly at the ACPI core level.
To facilitate converting the ACPI thermal zone driver into a platform
one, modify acpi_set_pnp_ids() to set the platform_id flag for thermal
zones in analogy with device objects to cause platform devices to be
registered for them.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: lihuisong@huawei.com
Link: https://patch.msgid.link/4701463.LvFx2qVVIh@rafael.j.wysocki
It is generally questionable to mark struct acpi_device "devices" as
wakeup-capable because they represent firmware entities that by
themselves have no wakeup capabilities.
It was done for struct acpi_device "devices" corresponding to buttons
because the ACPI button driver was binding to them directly, but now
that corresponding platform devices are created for the buttons and
they are marked as wakeup-capable by the ACPI button driver, there is
no reason to continue doing it.
Update acpi_wakeup_gpe_init() accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2891119.BEx9A2HvPv@rafael.j.wysocki
Both ACPI button drivers have been converted to platform ones, so there
is no reason to attempt to bind an ACPI driver to a struct acpi_device
representing a fixed event device button.
Update the relevant code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2213073.OBFZWjSADL@rafael.j.wysocki
Move duplicate fixed event device registration code
from acpi_bus_scan_fixed() into a new function called
acpi_bus_add_fixed_device_object() and make acpi_bus_scan_fixed()
invoke that function as needed.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1916860.atdPhlSkOF@rafael.j.wysocki
On platforms using ACPI, power and sleep buttons may be so called "fixed
event devices" in which case they are hooked up directly to the Fixed
Events register in the platform via dedicated lines and there are no
corresponding device objects in the ACPI namespace. Nevertheless, in
Linux they get corresponding struct acpi_device objects with special
device IDs, either LNXPWRBN or LNXSLPBN, which are then used for driver
binding in a ususal way.
However, the function creating those struct acpi_device objects for
"fixed event device" buttons, acpi_bus_scan_fixed(), does not register
platform devices for them, unlike the generic code handling device
enumeration based on the ACPI namespace. Consequently, if an ACPI power
or sleep button is represented by a device object in the ACPI namespace,
it will get a corresponding platform device, but if it is a "fixed event
device", it will not get one, which is inconsistent and prevents the
ACPI power button driver from being converted into a platform driver.
For the sake of consistency and to allow the ACPI power button driver to
become a platform one going forward, modify acpi_bus_scan_fixed() to
register platform devices for "fixed event device" buttons and update
ACPI platform device registration code to work with non-device ACPI
object types, so it can handle the buttons in question.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3731144.R56niFO833@rafael.j.wysocki
There is a long-standing problem with ACPI device enumeration that
if the given device has a compatible ID which is one of the generic
system resource device IDs (PNP0C01 and PNP0C02), it will be claimed
by the PNP scan handler and it will not be represented as a platform
device, so it cannot be handled by a platform driver.
Drivers have been working around this issue by "manually" creating
platform devices that they can bind to (see the Intel HID driver for
one example) or adding their device IDs to acpi_nonpnp_device_ids[].
None of the above is particularly clean though and the only reason why
the PNP0C01 and PNP0C02 device IDs are present in acpi_pnp_device_ids[]
is to allow the legacy PNP system driver to bind to those devices and
reserve their resources so they are not used going forward.
Obviously, to address this problem PNP0C01 and PNP0C02 need to be
dropped from acpi_pnp_device_ids[], but doing so without making any
other changes would be problematic because the ACPI core would then
create platform devices for the generic system resource device objects
and that would not work on all systems for two reasons. First, the
PNP system driver explicitly avoids reserving I/O resources below the
"standard PC hardware" boundary, 0x100, to avoid conflicts in that range
(one possible case when this may happen is when the CMOS RTC driver is
involved), but the platform device creation code does not do that.
Second, there may be resource conflicts between the "system" devices and
the other devices in the system, possibly including conflicts with PCI
BARs. Registering the PNP system driver via fs_initcall() helps to
manage those conflicts, even though it does not make them go away.
Resource conflicts during the registration of "motherboard resources"
that occur after PCI has claimed BARs are harmless as a rule and do
not need to be addressed in any specific way.
To overcome the issues mentioned above, use the observation that it
is not actually necessary to create any device objects in addition
to struct acpi_device ones in order to reserve the "system" device
resources because that can be done directly in the ACPI device
enumeration code.
Namely, modify acpi_default_enumeration() to add the given ACPI device
object to a special "system devices" list if its _HID is either PNP0C01
or PNP0C02 without creating a platform device for it. Next, add a new
special acpi_scan_claim_resources() function that will be run via
fs_initcall() and will walk that list and reserve resources for each
device in it along the lines of what the PNP system driver does.
Having made the above changes, drop PNP0C01 and PNP0C02 from
acpi_pnp_device_ids[] which will allow platform devices to be created
for ACPI device objects whose _CID lists contain PNP0C01 or PNP0C02,
but the _HID is not in acpi_pnp_device_ids[].
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Drop a leftover comment and add a new one elsewhere ]
Link: https://patch.msgid.link/9550709.CDJkKcVGEf@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull thermal control updates from Rafael Wysocki:
"These add Nova Lake processor support to the Intel thermal drivers and
DPTF code, update thermal control documentation, simplify the ACPI
DPTF code related to thermal control, add QCS8300 compatible to the
tsens thermal DT bindings, add DT bindings for NXP i.MX91 thermal
module and add support for it to the imx91 thermal driver, update a
few other thermal drivers and fix a format string issue in a thermal
utility:
- Add Nova Lake processor thermal device to the int340x
processor_thermal driver, add DLVR support for Nova Lake to it, add
Nova Lake support to the ACPI DPTF code, document thermal
throttling on Intel platforms, and update workload type hint
interface documentation (Srinivas Pandruvada)
- Remove int340x thermal scan handler from the ACPI DPTF code because
it turned out to be unnecessary (Slawomir Rosek)
- Clean up the Intel int340x thermal driver (Kaushlendra Kumar)
- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek
Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli)
- Add support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)"
* tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
docs: driver-api/thermal/intel_dptf: Add new workload type hint
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Documentation: thermal: Document thermal throttling on Intel platforms
ACPI: DPTF: Support Nova Lake
thermal: intel: int340x: Add DLVR support for Nova Lake
thermal: int340x: processor_thermal: Add Nova Lake processor thermal device
thermal: intel: int340x: Replace sprintf() with sysfs_emit()
thermal: intel: int340x: Use symbolic constant for UUID comparison
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
ACPI: DPTF: Remove int340x thermal scan handler
thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL
Using the IS_ENABLED() macro in the int340x_thermal_handler_attach()
forces the kernel to be recompiled when thermal drivers are enabled
or disabled, which is a significant limitation of its modularity.
The IS_ENABLED() macro is particularly problematic for the Android
Generic Kernel Image (GKI) project which uses unified core kernel
while SoC/board support is moved to loadable vendor modules.
The Intel Dynamic Platform and Thermal Framework (DPTF) requires
thermal drivers to be loaded at runtime, thus ACPI bus scan handler
is not needed and acpi_default_enumeration() may create all platform
devices, regardless of the actual setting of CONFIG_INT340X_THERMAL.
Signed-off-by: Slawomir Rosek <srosek@google.com>
Link: https://patch.msgid.link/20251103162516.2606158-3-srosek@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251030154739.262582-2-marco.crivellari@suse.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
Pull iommu updates from Joerg Roedel:
- Inte VT-d:
- IOMMU driver updated to the latest VT-d specification
- Don't enable PRS if PDS isn't supported
- Replace snprintf with scnprintf
- Fix legacy mode page table dump through debugfs
- Miscellaneous cleanups
- AMD-Vi:
- Support kdump boot when SNP is enabled
- Apple-DART:
- 4-level page-table support
- RISC-V IOMMU:
- ACPI support
- Small number of miscellaneous cleanups and fixes
* tag 'iommu-updates-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (22 commits)
iommu/vt-d: Disallow dirty tracking if incoherent page walk
iommu/vt-d: debugfs: Avoid dumping context command register
iommu/vt-d: Removal of Advanced Fault Logging
iommu/vt-d: PRS isn't usable if PDS isn't supported
iommu/vt-d: Remove LPIG from page group response descriptor
iommu/vt-d: Drop unused cap_super_offset()
iommu/vt-d: debugfs: Fix legacy mode page table dump logic
iommu/vt-d: Replace snprintf with scnprintf in dmar_latency_snapshot()
iommu/io-pgtable-dart: Fix off by one error in table index check
iommu/riscv: Add ACPI support
ACPI: scan: Add support for RISC-V in acpi_iommu_configure_id()
ACPI: RISC-V: Add support for RIMT
iommu/omap: Use int type to store negative error codes
iommu/apple-dart: Clear stream error indicator bits for T8110 DARTs
iommu/amd: Skip enabling command/event buffers for kdump
crypto: ccp: Skip SEV and SNP INIT for kdump boot
iommu/amd: Reuse device table for kdump
iommu/amd: Add support to remap/unmap IOMMU buffers for kdump
iommu/apple-dart: Add 4-level page table support
iommu/io-pgtable-dart: Add 4-level page table support
...
Guangshuo LiandRafael J. Wysocki
Rafael J. Wysocki
Linus Torvalds
Kees Cook
Yicong YangandRafael J. Wysocki
Julia LawallandRafael J. Wysocki
Slawomir RosekandRafael J. Wysocki
Marco CrivellariandRafael J. Wysocki