The amdxdna driver normally performs DMA using userspace virtual address
plus PASID. For debugging and validation purposes, add a module parameter,
force_iova, to force DMA to go through IOMMU IOVA mapping.
When force_iova=1 is set, the driver will allocate and map DMA buffers
using IOVA.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260126193001.1400545-1-lizhi.hou@amd.com
The AMD PMF driver provides realtime column utilization (npu_busy)
metrics for the NPU. Extend the DRM_IOCTL_AMDXDNA_GET_INFO sensor
query to expose these metrics to userspace.
Add AMDXDNA_SENSOR_TYPE_COLUMN_UTILIZATION to the sensor type enum
and update aie2_get_sensors() to return both the total power and up
to 8 column utilization sensors if the user buffer permits.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
[lizhi: support legacy tool which uses small buffer. checkpatch cleanup]
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260311171842.473453-1-lizhi.hou@amd.com
The AMD PMF driver provides an interface to obtain realtime power
estimates for the NPU. Expose this information to userspace through a
new DRM_IOCTL_AMDXDNA_GET_INFO parameter, allowing applications to query
the current NPU power level.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
(Update comment to indicate power and utilization)
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260228061109.361239-2-superm1@kernel.org
Requested by Maxime Ripard for drm-misc-next because renesas people need
fb797a7010 ("drm: renesas: rz-du: mipi_dsi: Set DSI divider").
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
The runtime suspend callback drains the running job workqueue before
suspending the device. If a job is still executing and calls
pm_runtime_resume_and_get(), it can deadlock with the runtime suspend
path.
Fix this by moving pm_runtime_resume_and_get() from the job execution
routine to the job submission routine, ensuring the device is resumed
before the job is queued and avoiding the deadlock during runtime
suspend.
Fixes: 063db45183 ("accel/amdxdna: Enhance runtime power management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260310180058.336348-1-lizhi.hou@amd.com
If the command stream has larger padding sizes than the IFM and OFM
diminsions, then the calculations will underflow to a negative value.
The result is a very large region bounds which is caught on submit, but
it's better to catch it earlier.
Current mesa ethosu driver has a signedness bug which resulted in
padding of 127 (the max) and triggers this issue.
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-3-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
If the job submit fails before adding the job to the scheduler queue
such as when the GEM buffer bounds checks fail, then doing a
ethosu_job_put() results in a pm_runtime_put_autosuspend() without the
corresponding pm_runtime_resume_and_get(). The dma_fence_put()'s are
also unnecessary, but seem to be harmless.
Split the ethosu_job_cleanup() function into 2 parts for the before
and after the job is queued.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-1-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The management channel used for firmware control command submission is
currently created after the firmware is started. If channel creation
fails (for example, due to memory allocation failure or workqueue
creation interruption), the firmware remains in a pending state and is
unable to receive any control commands.
To avoid leaving the firmware in this inconsistent state, split
xdna_mailbox_create_channel() into two separate functions so that
resource allocation can be completed before interacting with the
hardware.
xdna_mailbox_alloc_channel()
Allocates memory and initializes the workqueue. This can be called
earlier, before interacting with the hardware.
xdna_mailbox_start_channel()
Performs the hardware interaction required to start the channel.
Rename xdna_mailbox_destroy_channel() to xdna_mailbox_free_channel().
Ensure that xdna_mailbox_stop_channel() and xdna_mailbox_free_channel()
properly unwind the corresponding start and allocation steps, respectively.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260305062041.3954024-1-lizhi.hou@amd.com
Add the missing major number in npu1_fw_feature_table.
Without the major version specified, the firmware feature check fails,
preventing new firmware commands from being enabled on the NPU1
platform.
With the correct major version populated, the driver properly detects
firmware support and enables the new command.
Fixes: f1eac46fe5 ("accel/amdxdna: Update firmware version check for latest firmware")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260304195012.3616908-1-lizhi.hou@amd.com
Implement per-user resource limits to prevent resource exhaustion.
Root users can allocate all available contexts (128) and doorbells
(255), while non-root users are limited to half of the available
resources (64 contexts and 127 doorbells respectively).
This prevents scenarios where a single user could monopolize NPU
resources and starve other users on multi-user systems.
Change doorbell ID and command queue ID allocation errors to debug
messages as those are user triggered.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20260302202207.469442-1-maciej.falkowski@linux.intel.com
mgmt_chann may be set to NULL if the firmware returns an unexpected
error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL
pointer dereference in aie2_hw_stop().
Fix this by introducing a dedicated helper to destroy mgmt_chann
and by adding proper NULL checks before accessing it.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260226213857.3068474-1-lizhi.hou@amd.com
Newer userspace applications may read the payload of a failed command
to obtain detailed error information. However, the driver and old firmware
versions may not support returning advanced error information.
In this case, initialize the command payload with an invalid value so
userspace can detect that no detailed error information is available.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260227004841.3080241-1-lizhi.hou@amd.com
Lizhi Hou
Maxime Ripard
Mario Limonciello (AMD)andLizhi Hou
Karol Wachowski
Simona Vetter
Andrzej KacprowskiandThomas Zimmermann
Rob Herring (Arm)
