pin_user_pages_fast() can partially succeed and return the number of
pages that were actually pinned. However, the bio_integrity_map_user()
does not handle this partial pinning. This leads to a general protection
fault since bvec_from_pages() dereferences an unpinned page address,
which is 0.
To fix this, add a check to verify that all requested memory is pinned.
If partial pinning occurs, unpin the memory and return -EFAULT.
Kernel Oops:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6
Fixes: 492c5d4559 ("block: bio-integrity: directly map user buffers")
Acked-by: Chao Shi <cshi008@fiu.edu>
Acked-by: Weidong Zhu <weizhu@fiu.edu>
Acked-by: Dave Tian <daveti@purdue.edu>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://github.com/linux-blktests/blktests/pull/244
Link: https://patch.msgid.link/20260512050929.541397-2-iam@sung-woo.kim
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER.
Fixes: 3991657ae7 ("block: set bip_vcnt correctly")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511215151.346228-1-devnexen@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_add_page() and bio_integrity_add_page() reject pages from different
dev_pagemaps entirely, returning 0 even when those pages have compatible
DMA mapping requirements. This forces callers to start a new bio when
buffers span pgmap boundaries, even though the pages could safely coexist
as separate bvec entries.
This matters for guests where memory is registered through
devm_memremap_pages() with MEMORY_DEVICE_GENERIC in multiple calls,
creating separate dev_pagemaps for each chunk. When a direct I/O buffer
spans two such chunks, bio_add_page() rejects the second page, forcing an
unnecessary bio split or I/O failure.
Introduce zone_device_pages_compatible() in blk.h to check whether two
pages can coexist in the same bio as separate bvec entries. The block DMA
iterator (blk_dma_map_iter_start) caches the P2PDMA mapping state from the
first segment and applies it to all others, so P2PDMA pages from different
pgmaps must not be mixed, and neither must P2PDMA and non-P2PDMA pages.
All other combinations (MEMORY_DEVICE_GENERIC pages from different pgmaps,
or MEMORY_DEVICE_GENERIC with normal RAM) use the same dma_map_phys path
and are safe.
Replace the blanket zone_device_pages_have_same_pgmap() rejection with
zone_device_pages_compatible(), while keeping
zone_device_pages_have_same_pgmap() as a merge guard.
Pages from different pgmaps can be added as separate bvec entries but
must not be coalesced into the same segment, as that would make
it impossible to recover the correct pgmap via page_pgmap().
Fixes: 49580e6907 ("block: add check when merging zone device pages")
Cc: stable@vger.kernel.org
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260410153414.4159050-3-namjain@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to set the seed and check flag based on useful defaults
from the profile.
Note that this includes a small behavior change, as we now only set the
seed if any action is set, which is fine as nothing will look at it
otherwise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The current block layer automatic integrity protection allocates the
actual integrity buffer, which has three problems:
- because it happens at the bottom of the I/O stack and doesn't use a
mempool it can deadlock under load
- because the data size in a bio is almost unbounded when using lage
folios it can relatively easily exceed the maximum kmalloc size
- even when it does not exceed the maximum kmalloc size, it could
exceed the maximum segment size of the device
Fix this by limiting the I/O size so that we can allocate at least a
2MiB integrity buffer, i.e. 128MiB for 8 byte PI and 512 byte integrity
intervals, and create a mempool as a last resort for this maximum size,
mirroring the scheme used for bvecs. As a nice upside none of this
can fail now, so we remove the error handling and open code the
trivial addition of the bip vec.
The new allocation helpers sit outside of bio-integrity-auto.c because
I plan to reuse them for file system based PI in the near future.
Fixes: 7ba1ba12ee ("block: Block layer data integrity support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the extraction flags to allow p2p pages for the metadata buffer if
the block device allows it. Similar to data payloads, ensure the bio
does not use merging if we see a p2p page.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're checking length and addresses against the same alignment value, so
use the more simple iterator check.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To get out of the DMA mapping helpers having to check every segment for
it's P2P status, ensure that bios either contain P2P transfers or non-P2P
transfers, and that a P2P bio only contains ranges from a single device.
This means we do the page zone access in the bio add path where it should
be still page hot, and will only have do the fairly expensive P2P topology
lookup once per bio down in the DMA mapping path, and only for already
marked bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bvec_try_merge_page currently returns if the added page fragment is
within the same page as the last page in the last current bio_vec.
This information is used by __bio_iov_iter_get_pages so that we always
have a single folio pin per page even when the page is split over
multiple __bio_iov_iter_get_pages calls.
Threading this through the entire lowlevel add page to bio logic is
annoying and inefficient and leads to less code sharing than otherwise
possible. Instead add code to __bio_iov_iter_get_pages that checks if
the bio_vecs did not change and thus a merge into the last segment must
have happened, and if there is an offset into the page for the currently
added fragment, because if yes we must have already had a previous
fragment of the same page in the last bio_vec. While this is still a bit
ugly, it keeps the logic in the one place that needs it and allows for
more code sharing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250512042354.514329-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Placing multiple protection information buffers inside the same page
can lead to oopses because set_page_dirty_lock() can't be called from
interrupt context.
Since a protection information buffer is not backed by a file there is
no point in setting its page dirty, there is nothing to synchronize.
Drop the call to set_page_dirty_lock() and remove the last argument to
bio_integrity_unpin_bvec().
Cc: stable@vger.kernel.org
Fixes: 492c5d4559 ("block: bio-integrity: directly map user buffers")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/yq1v7r3ev9g.fsf@ca-mkp.ca.oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many of the fields in struct bio_integrity_payload are only needed for
the default integrity buffer in the block layer, and the variable
sized array at the end of the structure makes it very hard to embed
into caller allocated structures.
Reduce struct bio_integrity_payload to the minimal structure needed in
common code and create two separate containing structures for the
automatically generated payload and the caller allocated payload.
The latter is a simple wrapper for struct bio_integrity_payload and
the bvecs, while the former contains the additional fields moved out
of struct bio_integrity_payload.
Always use a dedicated mempool for automatic integrity metadata
instead of depending on bio_set that is submitter controlled and thus
often doesn't have the mempool initialized and stop using mempools for
the submitter buffers as they aren't in the NOIO I/O submission path
where we need to guarantee forward progress.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20250225154449.422989-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch introduces BIP_CHECK_GUARD/REFTAG/APPTAG bip_flags which
indicate how the hardware should check the integrity payload.
BIP_CHECK_GUARD/REFTAG are conversion of existing semantics, while
BIP_CHECK_APPTAG is a new flag. The driver can now just rely on block
layer flags, and doesn't need to know the integrity source. Submitter
of PI decides which tags to check. This would also give us a unified
interface for user and kernel generated integrity.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20241128112240.8867-8-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copy back the bounce buffer to user-space in entirety when the parent
bio completes. The existing code uses bip_iter.bi_size for sizing the
copy, which can be modified. So move away from that and fetch it from
the vector passed to the block layer. While at it, switch to using
better variable names.
Fixes: 492c5d4559 ("block: bio-integrity: directly map user buffers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20241128112240.8867-3-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.
* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...
bio_integrity_add_page restricts the size of the integrity metadata to
queue_max_hw_sectors(q). This restriction is not needed because oversized
bios are split automatically. This restriction causes problems with
dm-integrity 'inline' mode - if we send a large bio to dm-integrity and
the bio's metadata are larger than queue_max_hw_sectors(q),
bio_integrity_add_page fails and the bio is ended with BLK_STS_RESOURCE
error.
An example that triggers it:
dd: error writing '/dev/mapper/in2': Cannot allocate memory
1+0 records in
0+0 records out
0 bytes copied, 0.00169291 s, 0.0 kB/s
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fb0987682c ("dm-integrity: introduce the Inline mode")
Fixes: 0ece1d649b ("bio-integrity: create multi-page bvecs in bio_integrity_add_page()")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/e41b3b8e-16c2-70cb-97cb-881234bb200d@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
