Pull uml updates from Johannes Berg:
"Mostly cleanups and small things, notably:
- musl libc compatibility
- vDSO installation fix
- TLB sync race fix for recent SMP support
- build fix for 32-bit with Clang 20/21"
* tag 'uml-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Disable GCOV_PROFILE_ALL on 32-bit UML with Clang 20/21
um: drivers: call kernel_strrchr() explicitly in cow_user.c
um: Replace strncpy() with strnlen()+memcpy_and_pad() in strncpy_chunk_from_user()
x86/um: fix vDSO installation
um: Remove CONFIG_FRAME_WARN from x86_64_defconfig
um: Fix pte_read() and pte_exec() for kernel mappings
um: Fix potential race condition in TLB sync
um: time-travel: clean up kernel-doc warnings
um: avoid struct sigcontext redefinition with musl
um: fix address-of CMSG_DATA() rvalue in stub
Reduce 22 declarations of empty_zero_page to 3 and 23 declarations of
ZERO_PAGE() to 4.
Every architecture defines empty_zero_page that way or another, but for the
most of them it is always a page aligned page in BSS and most definitions
of ZERO_PAGE do virt_to_page(empty_zero_page).
Move Linus vetted x86 definition of empty_zero_page and ZERO_PAGE() to the
core MM and drop these definitions in architectures that do not implement
colored zero page (MIPS and s390).
ZERO_PAGE() remains a macro because turning it to a wrapper for a static
inline causes severe pain in header dependencies.
For the most part the change is mechanical, with these being noteworthy:
* alpha: aliased empty_zero_page with ZERO_PGE that was also used for boot
parameters. Switching to a generic empty_zero_page removes the aliasing
and keeps ZERO_PGE for boot parameters only
* arm64: uses __pa_symbol() in ZERO_PAGE() so that definition of
ZERO_PAGE() is kept intact.
* m68k/parisc/um: allocated empty_zero_page from memblock,
although they do not support zero page coloring and having it in BSS
will work fine.
* sparc64 can have empty_zero_page in BSS rather allocate it, but it
can't use virt_to_page() for BSS. Keep it's definition of ZERO_PAGE()
but instead of allocating it, make mem_map_zero point to
empty_zero_page.
* sh: used empty_zero_page for boot parameters at the very early boot.
Rename the parameters page to boot_params_page and let sh use the generic
empty_zero_page.
* hexagon: had an amusing comment about empty_zero_page
/* A handy thing to have if one has the RAM. Declared in head.S */
that unfortunately had to go :)
Link: https://lkml.kernel.org/r/20260211103141.3215197-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha]
Acked-by: Dinh Nguyen <dinguyen@kernel.org> [nios2]
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace the deprecated[1] strncpy() with strnlen() on the source
followed by memcpy_and_pad().
This function is a chunk callback for UML's strncpy_from_user()
implementation, called by buffer_op() to process userspace memory one
page at a time. The source is a kernel-mapped userspace address that
is not guaranteed to be NUL-terminated; "len" bounds how many bytes
to read from it.
By measuring the source string length first with strnlen(), we avoid
reading past the NUL terminator in the source. memcpy_and_pad() then
copies the string content and zero-fills the remainder of the chunk,
preserving the original strncpy() behavior exactly: copy up to the
first NUL, then pad with zeros to the full length.
strtomem_pad() would be the idiomatic helper for this strnlen() +
memcpy_and_pad() pattern, but it requires a compile-time-determinable
destination size (via ARRAY_SIZE()). Here the destination is a char *
into a caller-provided buffer and the chunk length is a runtime value,
so the explicit two-step is necessary.
No behavioral change: the same bytes are written to the destination
(string content followed by zero padding), the pointer advances by
the same amount, and the NUL-found return condition is unchanged.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20260323171713.work.839-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The pte_read() and pte_exec() helpers are only used during the TLB
sync to determine the read/exec permissions for mmap. However, for
kernel mappings, they will always return 0. This leads to kern_map()
having to unconditionally set the exec flag to 1 and the read flag
unexpectedly always being 0. Remove the unnecessary check for the
_PAGE_USER bit in these helpers to ensure that the kernel mapping
permissions can be correctly determined.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20260302235224.1915380-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The UML stub takes the address of CMSG_DATA(fd_msg):
fd_map = (void *)&CMSG_DATA(fd_msg);
CMSG_DATA() is specified by POSIX to return unsigned char *. Taking
its address is semantically wrong -- the intent is to get a pointer
to the control message data, which is exactly what CMSG_DATA()
already returns.
This happens to compile with glibc because glibc's primary
CMSG_DATA definition accesses a flexible array member:
#define CMSG_DATA(cmsg) ((cmsg)->__cmsg_data)
An array lvalue can have its address taken, and &array yields the
same address as array. However, glibc also has an alternative
definition that uses pointer arithmetic (returning an rvalue), and
musl's definition always uses pointer arithmetic:
/* musl */
#define CMSG_DATA(cmsg) \
((unsigned char *)(((struct cmsghdr *)(cmsg)) + 1))
Taking the address of an rvalue is a hard error in C, so the
current code fails to compile with musl libc.
Remove the erroneous & operator. The resulting code is correct
regardless of the CMSG_DATA implementation -- it simply assigns the
data pointer, which is what the subsequent code (fd_map[--num_fds])
expects.
No functional change with glibc; fixes the build with musl.
Signed-off-by: Marcel W. Wysocki <maci.stgn@gmail.com>
Link: https://patch.msgid.link/20260215142803.1455757-1-maci.stgn@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3e ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
With Clang's context analysis, the compiler is a bit more strict about
what goes into the __acquires/__releases annotations and can't refer to
non-existent variables.
On an UM build, mm_id.h is transitively included into mm_types.h, and we
can observe the following error (if context analysis is enabled in e.g.
stackdepot.c):
In file included from lib/stackdepot.c:17:
In file included from include/linux/debugfs.h:15:
In file included from include/linux/fs.h:5:
In file included from include/linux/fs/super.h:5:
In file included from include/linux/fs/super_types.h:7:
In file included from include/linux/list_lru.h:14:
In file included from include/linux/xarray.h:16:
In file included from include/linux/gfp.h:7:
In file included from include/linux/mmzone.h:22:
In file included from include/linux/mm_types.h:26:
In file included from arch/um/include/asm/mmu.h:12:
>> arch/um/include/shared/skas/mm_id.h:24:54: error: use of undeclared identifier 'turnstile'
24 | void enter_turnstile(struct mm_id *mm_id) __acquires(turnstile);
| ^~~~~~~~~
arch/um/include/shared/skas/mm_id.h:25:53: error: use of undeclared identifier 'turnstile'
25 | void exit_turnstile(struct mm_id *mm_id) __releases(turnstile);
| ^~~~~~~~~
One (discarded) option was to use token_context_lock(turnstile) to just
define a token with the already used name, but that would not allow the
compiler to distinguish between different mm_id-dependent instances.
Another constraint is that struct mm_id is only declared and incomplete
in the header, so even if we tried to construct an expression to get to
the mutex instance, this would fail (including more headers transitively
everywhere should also be avoided).
Instead, just declare an mm_id-dependent helper to return the mutex, and
use the mm_id-dependent call expression in the __acquires/__releases
attributes; the compiler will consider the identity of the mutex to be
the call expression. Then using __get_turnstile() in the lock/unlock
wrappers (with context analysis enabled for mmu.c) the compiler will be
able to verify the implementation of the wrappers as-is.
We leave context analysis disabled in arch/um/kernel/skas/ for now. This
change is a preparatory change to allow enabling context analysis in
subsystems that include any of the above headers.
No functional change intended.
Closes: https://lore.kernel.org/oe-kbuild-all/202512171220.vHlvhpCr-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-23-elver@google.com
Pull objtool fixes from Ingo Molnar:
"Address various objtool scalability bugs/inefficiencies exposed by
allmodconfig builds, plus improve the quality of alternatives
instructions generated code and disassembly"
* tag 'objtool-urgent-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Simplify .annotate_insn code generation output some more
objtool: Add more robust signal error handling, detect and warn about stack overflows
objtool: Remove newlines and tabs from annotation macros
objtool: Consolidate annotation macros
x86/asm: Remove ANNOTATE_DATA_SPECIAL usage
x86/alternative: Remove ANNOTATE_DATA_SPECIAL usage
objtool: Fix stack overflow in validate_branch()
Pull UML updates from Johannes Berg:
"Apart from the usual small churn, we have
- initial SMP support (only kernel)
- major vDSO cleanups (and fixes for 32-bit)"
* tag 'uml-for-linux-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (33 commits)
um: Disable KASAN_INLINE when STATIC_LINK is selected
um: Don't rename vmap to kernel_vmap
um: drivers: virtio: use string choices helper
um: Always set up AT_HWCAP and AT_PLATFORM
x86/um: Remove FIXADDR_USER_START and FIXADDR_USE_END
um: Remove __access_ok_vsyscall()
um: Remove redundant range check from __access_ok_vsyscall()
um: Remove fixaddr_user_init()
x86/um: Drop gate area handling
x86/um: Do not inherit vDSO from host
um: Split out default elf_aux_hwcap
x86/um: Move ELF_PLATFORM fallback to x86-specific code
um: Split out default elf_aux_platform
um: Avoid circular dependency on asm-offsets in pgtable.h
um: Enable SMP support on x86
asm-generic: percpu: Add assembly guard
um: vdso: Remove getcpu support on x86
um: Add initial SMP support
um: Define timers on a per-CPU basis
um: Determine sleep based on need_resched()
...
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
Add initial symmetric multi-processing (SMP) support to UML. With
this support enabled, users can tell UML to start multiple virtual
processors, each represented as a separate host thread.
In UML, kthreads and normal threads (when running in kernel mode)
can be scheduled and executed simultaneously on different virtual
processors. However, the userspace code of normal threads still
runs within their respective single-threaded stubs.
That is, SMP support is currently available both within the kernel
and across different processes, but still remains limited within
threads of the same process in userspace.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20251027001815.1666872-6-tiwei.bie@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With SMP and NO_HZ enabled, the CPU may still need to sleep even
if the timer is disarmed. Switch to deciding whether to sleep based
on pending resched. Additionally, because disabling IRQs does not
block SIGALRM, it is also necessary to check for any pending timer
alarms. This is a preparation for adding SMP support.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20251027001815.1666872-4-tiwei.bie@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, initial_thread_cb() temporarily disables kmalloc when
it invokes the callback, allowing the callback to bypass kmalloc.
This is unnecessary for the current users of initial_thread_cb(),
and we should avoid memory allocations that are not under the
control of the UML kernel. Therefore, let's stop temporarily
disabling kmalloc in initial_thread_cb().
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20251027001815.1666872-2-tiwei.bie@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The file-based iomem emulation was introduced to support writing
paravirtualized drivers based on emulated iomem regions. However,
the only driver that makes use of it is an example driver called
mmapper, which was written over two decades ago.
We now have several modern device emulation mechanisms, such as
vhost-user-based virtio-uml. Remove the file-based iomem emulation
support to reduce the maintenance burden.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20251027054519.1996090-5-tiwei.bie@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Although UML_ROUND_UP() is defined in a shared header file, it
depends on the PAGE_SIZE and PAGE_MASK macros, so it can only be
used in kernel code. Considering its name is not very clear and
its functionality is the same as PAGE_ALIGN(), replace its usages
with a direct call to PAGE_ALIGN() and remove it.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20251027054519.1996090-4-tiwei.bie@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
