Reduce 22 declarations of empty_zero_page to 3 and 23 declarations of
ZERO_PAGE() to 4.
Every architecture defines empty_zero_page that way or another, but for the
most of them it is always a page aligned page in BSS and most definitions
of ZERO_PAGE do virt_to_page(empty_zero_page).
Move Linus vetted x86 definition of empty_zero_page and ZERO_PAGE() to the
core MM and drop these definitions in architectures that do not implement
colored zero page (MIPS and s390).
ZERO_PAGE() remains a macro because turning it to a wrapper for a static
inline causes severe pain in header dependencies.
For the most part the change is mechanical, with these being noteworthy:
* alpha: aliased empty_zero_page with ZERO_PGE that was also used for boot
parameters. Switching to a generic empty_zero_page removes the aliasing
and keeps ZERO_PGE for boot parameters only
* arm64: uses __pa_symbol() in ZERO_PAGE() so that definition of
ZERO_PAGE() is kept intact.
* m68k/parisc/um: allocated empty_zero_page from memblock,
although they do not support zero page coloring and having it in BSS
will work fine.
* sparc64 can have empty_zero_page in BSS rather allocate it, but it
can't use virt_to_page() for BSS. Keep it's definition of ZERO_PAGE()
but instead of allocating it, make mem_map_zero point to
empty_zero_page.
* sh: used empty_zero_page for boot parameters at the very early boot.
Rename the parameters page to boot_params_page and let sh use the generic
empty_zero_page.
* hexagon: had an amusing comment about empty_zero_page
/* A handy thing to have if one has the RAM. Declared in head.S */
that unfortunately had to go :)
Link: https://lkml.kernel.org/r/20260211103141.3215197-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha]
Acked-by: Dinh Nguyen <dinguyen@kernel.org> [nios2]
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3e ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.
sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
The include/generated/asm-offsets.h is generated in Kbuild during
compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to
generate another similar offset header file, circular dependency can
happen.
For example, we want to generate a offset file include/generated/test.h,
which is included in include/sched/sched.h. If we generate asm-offsets.h
first, it will fail, as include/sched/sched.h is included in asm-offsets.c
and include/generated/test.h doesn't exist; If we generate test.h first,
it can't success neither, as include/generated/asm-offsets.h is included
by it.
In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular
dependency. We can generate asm-offsets.h first, and if the
COMPILE_OFFSETS is defined, we don't include the "generated/test.h".
And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this
purpose.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of the copy_thread
function that is called from copy_process to consistently pass
clone_flags as u64, so that no truncation to 32-bit integers occurs on
32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-3-53fcf5577d57@siemens-energy.com
Fixes: c5febea095 ("fork: Pass struct kernel_clone_args into copy_thread")
Acked-by: Guo Ren (Alibaba Damo Academy) <guoren@kernel.org>
Acked-by: Andreas Larsson <andreas@gaisler.com> # sparc
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
Pull execve updates from Kees Cook:
- Introduce regular REGSET note macros arch-wide (Dave Martin)
- Remove arbitrary 4K limitation of program header size (Yin Fengwei)
- Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi)
* tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits)
fork: reorder function qualifiers for copy_clone_args_from_user
binfmt_elf: remove the 4k limitation of program header size
binfmt_elf: Warn on missing or suspicious regset note names
xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
...
Patch series "kdump: crashkernel reservation from CMA", v5.
This series implements a way to reserve additional crash kernel memory
using CMA.
Currently, all the memory for the crash kernel is not usable by the 1st
(production) kernel. It is also unmapped so that it can't be corrupted by
the fault that will eventually trigger the crash. This makes sense for
the memory actually used by the kexec-loaded crash kernel image and initrd
and the data prepared during the load (vmcoreinfo, ...). However, the
reserved space needs to be much larger than that to provide enough
run-time memory for the crash kernel and the kdump userspace. Estimating
the amount of memory to reserve is difficult. Being too careful makes
kdump likely to end in OOM, being too generous takes even more memory from
the production system. Also, the reservation only allows reserving a
single contiguous block (or two with the "low" suffix). I've seen systems
where this fails because the physical memory is fragmented.
By reserving additional crashkernel memory from CMA, the main crashkernel
reservation can be just large enough to fit the kernel and initrd image,
minimizing the memory taken away from the production system. Most of the
run-time memory for the crash kernel will be memory previously available
to userspace in the production system. As this memory is no longer
wasted, the reservation can be done with a generous margin, making kdump
more reliable. Kernel memory that we need to preserve for dumping is
normally not allocated from CMA, unless it is explicitly allocated as
movable. Currently this is only the case for memory ballooning and zswap.
Such movable memory will be missing from the vmcore. User data is
typically not dumped by makedumpfile. When dumping of user data is
intended this new CMA reservation cannot be used.
There are five patches in this series:
The first adds a new ",cma" suffix to the recenly introduced generic
crashkernel parsing code. parse_crashkernel() takes one more argument to
store the cma reservation size.
The second patch implements reserve_crashkernel_cma() which performs the
reservation. If the requested size is not available in a single range,
multiple smaller ranges will be reserved.
The third patch updates Documentation/, explicitly mentioning the
potential DMA corruption of the CMA-reserved memory.
The fourth patch adds a short delay before booting the kdump kernel,
allowing pending DMA transfers to finish.
The fifth patch enables the functionality for x86 as a proof of
concept. There are just three things every arch needs to do:
- call reserve_crashkernel_cma()
- include the CMA-reserved ranges in the physical memory map
- exclude the CMA-reserved ranges from the memory available
through /proc/vmcore by excluding them from the vmcoreinfo
PT_LOAD ranges.
Adding other architectures is easy and I can do that as soon as this
series is merged.
With this series applied, specifying
crashkernel=100M craskhernel=1G,cma
on the command line will make a standard crashkernel reservation
of 100M, where kexec will load the kernel and initrd.
An additional 1G will be reserved from CMA, still usable by the production
system. The crash kernel will have 1.1G memory available. The 100M can
be reliably predicted based on the size of the kernel and initrd.
The new cma suffix is completely optional. When no
crashkernel=size,cma is specified, everything works as before.
This patch (of 5):
Add a new cma_size parameter to parse_crashkernel(). When not NULL, call
__parse_crashkernel to parse the CMA reservation size from
"crashkernel=size,cma" and store it in cma_size.
Set cma_size to NULL in all calls to parse_crashkernel().
Link: https://lkml.kernel.org/r/aEqnxxfLZMllMC8I@dwarf.suse.cz
Link: https://lkml.kernel.org/r/aEqoQckgoTQNULnh@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce file_getattr() and file_setattr() syscalls to manipulate inode
extended attributes. The syscalls takes pair of file descriptor and
pathname. Then it operates on inode opened accroding to openat()
semantics. The struct file_attr is passed to obtain/change extended
attributes.
This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference
that file don't need to be open as we can reference it with a path
instead of fd. By having this we can manipulated inode extended
attributes not only on regular files but also on special ones. This
is not possible with FS_IOC_FSSETXATTR ioctl as with special files
we can not call ioctl() directly on the filesystem inode using fd.
This patch adds two new syscalls which allows userspace to get/set
extended inode attributes on special files by using parent directory
and a path - *at() like syscall.
CC: linux-api@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: linux-xfs@vger.kernel.org
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
kbuild reports the following warning:
arch/sh/kernel/kprobes.c: In function 'kprobe_exceptions_notify':
>> arch/sh/kernel/kprobes.c:412:24: warning: variable 'p' set but not used [-Wunused-but-set-variable]
412 | struct kprobe *p = NULL;
| ^
The variable 'p' is indeed unused since the commit fa5a24b16f
("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Remove that variable along with 'kprobe_opcode_t *addr' which also
becomes unused after 'p' is removed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505151341.EuRFR22l-lkp@intel.com/
Fixes: fa5a24b16f ("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN),
which behaves equivalently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Pull sh updates from John Paul Adrian Glaubitz:
"One important fix and one small configuration update.
The first patch by Artur Rojek fixes an issue with the J2 firmware
loader not being able to find the location of the device tree blob due
to insufficient alignment of the .bss section which rendered J2 boards
unbootable.
The second patch by Johan Korsnes updates the defconfigs on sh to drop
the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete
after 8c710f7525 ("net/sched: Retire tcindex classifier").
Summary:
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary"
* tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
sh: Align .bss section padding to 8-byte boundary
J2-based devices expect to find a device tree blob at the end of the
.bss section. As of a77725a9a3 ("scripts/dtc: Update to upstream
version v1.6.1-19-g0a3a9d3449c8"), libfdt enforces 8-byte alignment
for the DTB, causing J2 devices to fail early in sh_fdt_init().
As the J2 loader firmware calculates the DTB location based on the kernel
image .bss section size rather than the __bss_stop symbol offset, the
required alignment can't be enforced with BSS_SECTION(0, PAGE_SIZE, 8).
To fix this, inline a modified version of the above macro which grows
.bss by the required size. While this change affects all existing SH
boards, it should be benign on platforms which don't need this alignment.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Pull asm-generic updates from Arnd Bergmann:
"This is mainly set of cleanups of asm-generic/io.h, resolving problems
with inconsistent semantics of ioread64/iowrite64 that were causing
runtime and build issues.
The "GENERIC_IOMAP" version that switches between inb()/outb() and
readb()/writeb() style accessors is now only used on architectures
that have PC-style ISA devices that are not memory mapped (x86, uml,
m68k-q40 and powerpc-powernv), while alpha and parisc use a more
complicated variant and everything else just maps the ioread
interfaces to plan MMIO (readb/writeb etc).
In addition there are two small changes from Raag Jadav to simplify
the asm-generic/io.h indirect inclusions and from Jann Horn to fix a
corner case with read_word_at_a_time"
* tag 'asm-generic-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
rwonce: fix crash by removing READ_ONCE() for unaligned read
rwonce: handle KCSAN like KASAN in read_word_at_a_time()
m68k: coldfire: select PCI_IOMAP for PCI
mips: export pci_iounmap()
mips: fix PCI_IOBASE definition
m68k/nommu: stop using GENERIC_IOMAP
mips: drop GENERIC_IOMAP wrapper
powerpc: asm/io.h: remove split ioread64/iowrite64 helpers
parisc: stop using asm-generic/iomap.h
sh: remove duplicate ioread/iowrite helpers
alpha: stop using asm-generic/iomap.h
io.h: drop unused headers
drm/draw: include missing headers
asm-generic/io.h: rework split ioread64/iowrite64 helpers
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
The ioread/iowrite functions on sh only do memory mapped I/O like the
generic verion, and never map onto non-MMIO inb/outb variants, so they
just add complexity. In particular, the use of asm-generic/iomap.h
ties the declaration to the x86 implementation.
Remove the custom versions and use the architecture-independent fallback
code instead. Some of the calling conventions on sh are different here,
so fix that by adding 'volatile' keywords where required by the generic
implementation and change the cpg clock driver to no longer depend on
the interesting choice of return types for ioread8/ioread16/ioread32.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 3b3376f222 ("sysctl.c: fix underflow value setting risk in vm_table")
fixes underflow value setting risk in vm_table but misses vdso_enabled
sysctl.
vdso_enabled sysctl is initialized with .extra1 value as SYSCTL_ZERO to
avoid negative value writes but the proc_handler is proc_dointvec and
not proc_dointvec_minmax and thus do not uses .extra1 and .extra2.
The following command thus works :
`# echo -1 > /proc/sys/vm/vdso_enabled`
This patch properly sets the proc_handler to proc_dointvec_minmax.
In addition to .extra1, .extra2 is set to SYSCTL_ONE. The sysctl is
thus bounded between 0 and 1.
Fixes: 3b3376f222 ("sysctl.c: fix underflow value setting risk in vm_table")
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
