C1-Pro acknowledges DVMSync messages before completing the SME/CME
memory accesses. Work around this by issuing an IPI to the affected CPUs
if they are running in EL0 with SME enabled.
Note that we avoid the local DSB in the IPI handler as the kernel runs
with SCTLR_EL1.IESB=1. This is sufficient to complete SME memory
accesses at EL0 on taking an exception to EL1. On the return to user
path, no barrier is necessary either. See the comment in
sme_set_active() and the more detailed explanation in the link below.
To avoid a potential IPI flood from malicious applications (e.g.
madvise(MADV_PAGEOUT) in a tight loop), track where a process is active
via mm_cpumask() and only interrupt those CPUs.
Link: https://lore.kernel.org/r/ablEXwhfKyJW1i7l@J2N7QTR9R3
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When software issues a Cache Maintenance Operation (CMO) targeting a
dirty cache line, the CPU and DSU cluster may optimize the operation by
combining the CopyBack Write and CMO into a single combined CopyBack
Write plus CMO transaction presented to the interconnect (MCN).
For these combined transactions, the MCN splits the operation into two
separate transactions, one Write and one CMO, and then propagates the
write and optionally the CMO to the downstream memory system or external
Point of Serialization (PoS).
However, the MCN may return an early CompCMO response to the DSU cluster
before the corresponding Write and CMO transactions have completed at
the external PoS or downstream memory. As a result, stale data may be
observed by external observers that are directly connected to the
external PoS or downstream memory.
This erratum affects any system topology in which the following
conditions apply:
- The Point of Serialization (PoS) is located downstream of the
interconnect.
- A downstream observer accesses memory directly, bypassing the
interconnect.
Conditions:
This erratum occurs only when all of the following conditions are met:
1. Software executes a data cache maintenance operation, specifically,
a clean or clean&invalidate by virtual address (DC CVAC or DC
CIVAC), that hits on unique dirty data in the CPU or DSU cache.
This results in a combined CopyBack and CMO being issued to the
interconnect.
2. The interconnect splits the combined transaction into separate Write
and CMO transactions and returns an early completion response to the
CPU or DSU before the write has completed at the downstream memory
or PoS.
3. A downstream observer accesses the affected memory address after the
early completion response is issued but before the actual memory
write has completed. This allows the observer to read stale data
that has not yet been updated at the PoS or downstream memory.
The implementation of workaround put a second loop of CMOs at the same
virtual address whose operation meet erratum conditions to wait until
cache data be cleaned to PoC. This way of implementation mitigates
performance penalty compared to purely duplicate original CMO.
Signed-off-by: Lucas Wei <lucaswei@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
* kvm-arm64/misc-6.16:
: .
: Misc changes and improvements for 6.16:
:
: - Add a new selftest for the SVE host state being corrupted by a guest
:
: - Keep HCR_EL2.xMO set at all times for systems running with the kernel at EL2,
: ensuring that the window for interrupts is slightly bigger, and avoiding
: a pretty bad erratum on the AmpereOne HW
:
: - Replace a couple of open-coded on/off strings with str_on_off()
:
: - Get rid of the pKVM memblock sorting, which now appears to be superflous
:
: - Drop superflous clearing of ICH_LR_EOI in the LR when nesting
:
: - Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers from
: a pretty bad case of TLB corruption unless accesses to HCR_EL2 are
: heavily synchronised
:
: - Add a per-VM, per-ITS debugfs entry to dump the state of the ITS tables
: in a human-friendly fashion
: .
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: vgic-its: Add debugfs interface to expose ITS tables
arm64: errata: Work around AmpereOne's erratum AC04_CPU_23
KVM: arm64: nv: Remove clearing of ICH_LR<n>.EOI if ICH_LR<n>.HW == 1
KVM: arm64: Drop sort_memblock_regions()
KVM: arm64: selftests: Add test for SVE host corruption
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Replace ternary flags with str_on_off() helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
On AmpereOne AC04, updates to HCR_EL2 can rarely corrupt simultaneous
translations for data addresses initiated by load/store instructions.
Only instruction initiated translations are vulnerable, not translations
from prefetches for example. A DSB before the store to HCR_EL2 is
sufficient to prevent older instructions from hitting the window for
corruption, and an ISB after is sufficient to prevent younger
instructions from hitting the window for corruption.
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250513184514.2678288-1-scott@os.amperecomputing.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Calling into the MIDR checking framework from the PI code has recently
become much harder, due to the new fancy "multi-MIDR" support that
relies on tables being populated at boot time, but not that early that
they are available to the PI code. There are additional issues with
this framework, as the code really isn't position independend *at all*.
This leads to some ugly breakages, as reported by Ada.
It so appears that the only reason for the PI code to call into the
MIDR checking code is to cope with The Most Broken ARM64 System Ever,
aka Cavium ThunderX, which cannot deal with nG attributes that result
of the combination of KASLR and KPTI as a consequence of Erratum 27456.
Duplicate the check for the erratum in the PI code, removing the
dependency on the bulk of the MIDR checking framework. This allows
dropping that same check from kaslr_requires_kpti(), as the KPTI code
already relies on the ARM64_WORKAROUND_CAVIUM_27456 cap.
Fixes: c8c2647e69 ("arm64: Make _midr_in_range_list() an exported function")
Reported-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/3d97e45a-23cf-419b-9b6f-140b4d88de7b@arm.com
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250418093129.1755739-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/pmuv3-asahi:
: Support PMUv3 for KVM guests on Apple silicon
:
: Take advantage of some IMPLEMENTATION DEFINED traps available on Apple
: parts to trap-and-emulate the PMUv3 registers on behalf of a KVM guest.
: Constrain the vPMU to a cycle counter and single event counter, as the
: Apple PMU has events that cannot be counted on every counter.
:
: There is a small new interface between the ARM PMU driver and KVM, where
: the PMU driver owns the PMUv3 -> hardware event mappings.
arm64: Enable IMP DEF PMUv3 traps on Apple M*
KVM: arm64: Provide 1 event counter on IMPDEF hardware
drivers/perf: apple_m1: Provide helper for mapping PMUv3 events
KVM: arm64: Remap PMUv3 events onto hardware
KVM: arm64: Advertise PMUv3 if IMPDEF traps are present
KVM: arm64: Compute synthetic sysreg ESR for Apple PMUv3 traps
KVM: arm64: Move PMUVer filtering into KVM code
KVM: arm64: Use guard() to cleanup usage of arm_pmus_lock
KVM: arm64: Drop kvm_arm_pmu_available static key
KVM: arm64: Use a cpucap to determine if system supports FEAT_PMUv3
KVM: arm64: Always support SW_INCR PMU event
KVM: arm64: Compute PMCEID from arm_pmu's event bitmaps
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
It appears that on Qualcomm's x1e CPU, CNTVOFF_EL2 doesn't really
work, specially with HCR_EL2.E2H=1.
A non-zero offset results in a screaming virtual timer interrupt,
to the tune of a few 100k interrupts per second on a 4 vcpu VM.
This is also evidenced by this CPU's inability to correctly run
any of the timer selftests.
The only case this doesn't break is when this register is set to 0,
which breaks VM migration.
When HCR_EL2.E2H=0, the timer seems to behave normally, and does
not result in an interrupt storm.
As a workaround, use the fact that this CPU implements FEAT_ECV,
and trap all accesses to the virtual timer and counter, keeping
CNTVOFF_EL2 set to zero, and emulate accesses to CVAL/TVAL/CTL
and the counter itself, fixing up the timer to account for the
missing offset.
And if you think this is disgusting, you'd probably be right.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for a number of CPUs in commits:
* 7187bb7d0b ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
* 75b3c43eab ("arm64: errata: Expand speculative SSBS workaround")
* 145502cac7ea70b5 ("arm64: errata: Expand speculative SSBS workaround (again)")
Since then, a (hopefully final) batch of updates have been published,
with two more affected CPUs. For the affected CPUs the existing
mitigation is sufficient, as described in their respective Software
Developer Errata Notice (SDEN) documents:
* Cortex-A715 (MP148) SDEN v15.0, erratum 3456084https://developer.arm.com/documentation/SDEN-2148827/1500/
* Neoverse-N3 (MP195) SDEN v5.0, erratum 3456111
https://developer.arm.com/documentation/SDEN-3050973/0500/
Enable the existing mitigation by adding the relevant MIDRs to
erratum_spec_ssbs_list, and update silicon-errata.rst and the
Kconfig text accordingly.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240930111705.3352047-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cortex-X4 erratum 3194386 and Neoverse-V3 erratum 3312417 are identical,
with duplicate Kconfig text and some unsightly ifdeffery. While we try
to share code behind CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS, having
separate options results in a fair amount of boilerplate code, and this
will only get worse as we expand the set of affected CPUs.
To reduce this boilerplate, unify the two behind a common Kconfig
option. This removes the duplicate text and Kconfig logic, and removes
the need for the intermediate ARM64_WORKAROUND_SPECULATIVE_SSBS option.
The set of affected CPUs is described as a list so that this can easily
be extended.
I've used ARM64_ERRATUM_3194386 (matching the Neoverse-V3 erratum ID) as
the common option, matching the way we use ARM64_ERRATUM_1319367 to
cover Cortex-A57 erratum 1319537 and Cortex-A72 erratum 1319367.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <wilL@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cortex-X4 and Neoverse-V3 suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time. This is described in their Software Developer Errata Notice (SDEN)
documents:
* Cortex-X4 SDEN v8.0, erratum 3194386:
https://developer.arm.com/documentation/SDEN-2432808/0800/
* Neoverse-V3 SDEN v6.0, erratum 3312417:
https://developer.arm.com/documentation/SDEN-2891958/0600/
To workaround these errata, it is necessary to place a speculation
barrier (SB) after MSR to the SSBS special-purpose register. This patch
adds the requisite SB after writes to SSBS within the kernel, and hides
the presence of SSBS from EL0 such that userspace software which cares
about SSBS will manipulate this via prctl(PR_GET_SPECULATION_CTRL, ...).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Implement the workaround for ARM Cortex-A510 erratum 3117295. On an
affected Cortex-A510 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The erratum and workaround are the same as ARM Cortex-A520 erratum
2966298, so reuse the existing workaround.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-2-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Pull arm64 updates from Catalin Marinas:
"No major architecture features this time around, just some new HWCAP
definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.
The bulk of the changes is reworking of the CPU capability checking
code (cpus_have_cap() etc).
- Major refactoring of the CPU capability detection logic resulting
in the removal of the cpus_have_const_cap() function and migrating
the code to "alternative" branches where possible
- Backtrace/kgdb: use IPIs and pseudo-NMI
- Perf and PMU:
- Add support for Ampere SoC PMUs
- Multi-DTC improvements for larger CMN configurations with
multiple Debug & Trace Controllers
- Rework the Arm CoreSight PMU driver to allow separate
registration of vendor backend modules
- Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
driver; use device_get_match_data() in the xgene driver; fix
NULL pointer dereference in the hisi driver caused by calling
cpuhp_state_remove_instance(); use-after-free in the hisi driver
- HWCAP updates:
- FEAT_SVE_B16B16 (BFloat16)
- FEAT_LRCPC3 (release consistency model)
- FEAT_LSE128 (128-bit atomic instructions)
- SVE: remove a couple of pseudo registers from the cpufeature code.
There is logic in place already to detect mismatched SVE features
- Miscellaneous:
- Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
bouncing is needed. The buffer is still required for small
kmalloc() buffers
- Fix module PLT counting with !RANDOMIZE_BASE
- Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
synchronisation code out of the set_ptes() loop
- More compact cpufeature displaying enabled cores
- Kselftest updates for the new CPU features"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
arm64/mm: Hoist synchronization out of set_ptes() loop
...
For ARM64_WORKAROUND_2658417, we use a cpu_enable() callback to hide the
ID_AA64ISAR1_EL1.BF16 ID register field. This is a little awkward as
CPUs may attempt to apply the workaround concurrently, requiring that we
protect the bulk of the callback with a raw_spinlock, and requiring some
pointless work every time a CPU is subsequently hotplugged in.
This patch makes this a little simpler by handling the masking once at
boot time. A new user_feature_fixup() function is called at the start of
setup_user_features() to mask the feature, matching the style of
elf_hwcap_fixup(). The ARM64_WORKAROUND_2658417 cpucap is added to
cpucap_is_possible() so that code can be elided entirely when this is
not possible.
Note that the ARM64_WORKAROUND_2658417 capability is matched with
ERRATA_MIDR_RANGE(), which implicitly gives the capability a
ARM64_CPUCAP_LOCAL_CPU_ERRATUM type, which forbids the late onlining of
a CPU with the erratum if the erratum was not present at boot time.
Therefore this patch doesn't change the behaviour for late onlining.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
