mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
master
279
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  Sascha BischoffandMarc Zyngier
|
d51c978b7d |
KVM: arm64: gic-v5: Communicate userspace-driveable PPIs via a UAPI
GICv5 systems will likely not support the full set of PPIs. The presence of any virtual PPI is tied to the presence of the physical PPI. Therefore, the available PPIs will be limited by the physical host. Userspace cannot drive any PPIs that are not implemented. Moreover, it is not desirable to expose all PPIs to the guest in the first place, even if they are supported in hardware. Some devices, such as the arch timer, are implemented in KVM, and hence those PPIs shouldn't be driven by userspace, either. Provided a new UAPI: KVM_DEV_ARM_VGIC_GRP_CTRL => KVM_DEV_ARM_VGIC_USERPSPACE_PPIs This allows userspace to query which PPIs it is able to drive via KVM_IRQ_LINE. Additionally, introduce a check in kvm_vm_ioctl_irq_line() to reject any PPIs not in the userspace mask. Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://patch.msgid.link/20260319154937.3619520-40-sascha.bischoff@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
  Yicong YangandWill Deacon
|
58ce78667a |
arm64: Add support for FEAT_{LS64, LS64_V}
Armv8.7 introduces single-copy atomic 64-byte loads and stores
instructions and its variants named under FEAT_{LS64, LS64_V}.
These features are identified by ID_AA64ISAR1_EL1.LS64 and the
use of such instructions in userspace (EL0) can be trapped.
As st64bv (FEAT_LS64_V) and st64bv0 (FEAT_LS64_ACCDATA) can not be tell
apart, FEAT_LS64 and FEAT_LS64_ACCDATA which will be supported in later
patch will be exported to userspace, FEAT_LS64_V will be enabled only
in kernel.
In order to support the use of corresponding instructions in userspace:
- Make ID_AA64ISAR1_EL1.LS64 visbile to userspace
- Add identifying and enabling in the cpufeature list
- Expose these support of these features to userspace through HWCAP3
and cpuinfo
ld64b/st64b (FEAT_LS64) and st64bv (FEAT_LS64_V) is intended for
special memory (device memory) so requires support by the CPU, system
and target memory location (device that support these instructions).
The HWCAP3_LS64, implies the support of CPU and system (since no
identification method from system, so SoC vendors should advertise
support in the CPU if system also support them).
Otherwise for ld64b/st64b the atomicity may not be guaranteed or a
DABT will be generated, so users (probably userspace driver developer)
should make sure the target memory (device) also have the support.
For st64bv 0xffffffffffffffff will be returned as status result for
unsupported memory so user should check it.
Document the restrictions along with HWCAP3_LS64.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
||
  Thomas HuthandCatalin Marinas
|
639f08fc20 |
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
__ASSEMBLY__ is only defined by the Makefile of the kernel, so this is not really useful for uapi headers (unless the userspace Makefile defines it, too). Let's switch to __ASSEMBLER__ which gets set automatically by the compiler when compiling assembly code. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Will Deacon
|
3d751c56c9 |
Merge branch 'for-next/cpufeature' into for-next/core
* for-next/cpufeature: arm64: cpufeature: add Neoverse-V3AE to BBML2 allow list arm64: errata: Apply workarounds for Neoverse-V3AE arm64: cputype: Add Neoverse-V3AE definitions arm64: cpufeature: add AmpereOne to BBML2 allow list arm64: cpufeature: Add Olympus MIDR to BBML2 allow list arm64: cputype: Add NVIDIA Olympus definitions arm64: cputype: Remove duplicate Cortex-X1C definitions arm64: errata: Expand speculative SSBS workaround for Cortex-A720AE arm64: cputype: Add Cortex-A720AE definitions arm64/hwcap: Add hwcap for FEAT_LSFE |
||
 Mark BrownandWill Deacon
|
220928e52c |
arm64/hwcap: Add hwcap for FEAT_LSFE
FEAT_LSFE (Large System Float Extension), providing atomic floating point memory operations, is optional from v9.5. This feature adds no new architectural stare and we have no immediate use for it in the kernel so simply provide a hwcap for it to support discovery by userspace. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> |
||
 Thomas WeißschuhandCatalin Marinas
|
9a6d3ff10f |
arm64: uapi: Provide correct __BITS_PER_LONG for the compat vDSO
The generic vDSO library uses the UAPI headers. On arm64 __BITS_PER_LONG is
always '64' even when used from the compat vDSO. In that case __GENMASK()
does an illegal bitshift, invoking undefined behaviour.
Change __BITS_PER_LONG to also work when used from the comapt vDSO.
To not confuse real userspace, only do this when building the kernel.
Reported-by: John Stultz <jstultz@google.com>
Closes: https://lore.kernel.org/lkml/CANDhNCqvKOc9JgphQwr0eDyJiyG4oLFS9R8rSFvU0fpurrJFDg@mail.gmail.com/
Fixes:
|
||
 Yeoreum YunandCatalin Marinas
|
f620372209 |
arm64/hwcaps: Add MTE_STORE_ONLY hwcaps
Since ARMv8.9, FEAT_MTE_STORE_ONLY can be used to restrict raise of tag check fault on store operation only. add MTE_STORE_ONLY hwcaps so that user can use this feature. Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Link: https://lore.kernel.org/r/20250618092957.2069907-5-yeoreum.yun@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Yeoreum YunandCatalin Marinas
|
7c7f55039b |
arm64: Report address tag when FEAT_MTE_TAGGED_FAR is supported
If FEAT_MTE_TAGGED_FAR (Armv8.9) is supported, bits 63:60 of the fault address
are preserved in response to synchronous tag check faults (SEGV_MTESERR).
This patch modifies below to support this feature:
- Use the original FAR_EL1 value when an MTE tag check fault occurs,
if ARM64_MTE_FAR is supported so that not only logical tag
(bits 59:56) but also address tag (bits 63:60] being reported too.
- Add HWCAP for mtefar to let user know bits 63:60 includes
address tag information when when FEAT_MTE_TAGGED_FAR is supported.
Applications that require this information should install
a signal handler with the SA_EXPOSE_TAGBITS flag.
While this introduces a minor ABI change,
most applications do not set this flag and therefore will not be affected.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250618084513.1761345-3-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
||
|
Marc Zyngier
|
b7628c7973 |
KVM: arm64: Allow userspace to limit the number of PMU counters for EL2 VMs
As long as we had purely EL1 VMs, we could easily update the number of guest-visible counters by letting userspace write to PMCR_EL0.N. With VMs started at EL2, PMCR_EL1.N only reflects MDCR_EL2.HPMN, and we don't have a good way to limit it. For this purpose, introduce a new PMUv3 attribute that allows limiting the maximum number of counters. This requires the explicit selection of a PMU. Suggested-by: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
 Oliver Upton
|
d300b0168e |
Merge branch 'kvm-arm64/pv-cpuid' into kvmarm/next
* kvm-arm64/pv-cpuid: : Paravirtualized implementation ID, courtesy of Shameer Kolothum : : Big-little has historically been a pain in the ass to virtualize. The : implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim : of vCPU scheduling. This can be particularly annoying when the guest : needs to know the underlying implementation to mitigate errata. : : "Hyperscalers" face a similar scheduling problem, where VMs may freely : migrate between hosts in a pool of heterogenous hardware. And yes, our : server-class friends are equally riddled with errata too. : : In absence of an architected solution to this wart on the ecosystem, : introduce support for paravirtualizing the implementation exposed : to a VM, allowing the VMM to describe the pool of implementations that a : VM may be exposed to due to scheduling/migration. : : Userspace is expected to intercept and handle these hypercalls using the : SMCCC filter UAPI, should it choose to do so. smccc: kvm_guest: Fix kernel builds for 32 bit arm KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2 smccc/kvm_guest: Enable errata based on implementation CPUs arm64: Make _midr_in_range_list() an exported function KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2 KVM: arm64: Specify hypercall ABI for retrieving target implementations arm64: Modify _midr_range() functions to read MIDR/REVIDR internally Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Oliver Upton
|
13f64f6d21 |
Merge branch 'kvm-arm64/nv-idregs' into kvmarm/next
* kvm-arm64/nv-idregs:
: Changes to exposure of NV features, courtesy of Marc Zyngier
:
: Apply NV-specific feature restrictions at reset rather than at the point
: of KVM_RUN. This makes the true feature set visible to userspace, a
: necessary step towards save/restore support or NV VMs.
:
: Add an additional vCPU feature flag for selecting the E2H0 flavor of NV,
: such that the VHE-ness of the VM can be applied to the feature set.
KVM: arm64: selftests: Test that TGRAN*_2 fields are writable
KVM: arm64: Allow userspace to write ID_AA64MMFR0_EL1.TGRAN*_2
KVM: arm64: Advertise FEAT_ECV when possible
KVM: arm64: Make ID_AA64MMFR4_EL1.NV_frac writable
KVM: arm64: Allow userspace to limit NV support to nVHE
KVM: arm64: Move NV-specific capping to idreg sanitisation
KVM: arm64: Enforce NV limits on a per-idregs basis
KVM: arm64: Make ID_REG_LIMIT_FIELD_ENUM() more widely available
KVM: arm64: Consolidate idreg callbacks
KVM: arm64: Advertise NV2 in the boot messages
KVM: arm64: Mark HCR.EL2.{NV*,AT} RES0 when ID_AA64MMFR4_EL1.NV_frac is 0
KVM: arm64: Mark HCR.EL2.E2H RES0 when ID_AA64MMFR1_EL1.VH is zero
KVM: arm64: Hide ID_AA64MMFR2_EL1.NV from guest and userspace
arm64: cpufeature: Handle NV_frac as a synonym of NV2
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
||
 Andre PrzywaraandOliver Upton
|
faf7714a47 |
KVM: arm64: nv: Allow userland to set VGIC maintenance IRQ
The VGIC maintenance IRQ signals various conditions about the LRs, when the GIC's virtualization extension is used. So far we didn't need it, but nested virtualization needs to know about this interrupt, so add a userland interface to setup the IRQ number. The architecture mandates that it must be a PPI, on top of that this code only exports a per-device option, so the PPI is the same on all VCPUs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [added some bits of documentation] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20250225172930.1850838-16-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
 Shameer KolothumandOliver Upton
|
c0000e58c7 |
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
The vendor_hyp_bmap bitmap holds the information about the Vendor Hyp
services available to the user space and can be get/set using
{G, S}ET_ONE_REG interfaces. This is done using the pseudo-firmware
bitmap register KVM_REG_ARM_VENDOR_HYP_BMAP.
At present, this bitmap is a 64 bit one and since the function numbers
for newly added DISCOVER_IPML_* hypercalls are 64-65, introduce
another pseudo-firmware bitmap register KVM_REG_ARM_VENDOR_HYP_BMAP_2.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250221140229.12588-4-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
||
|
Marc ZyngierandOliver Upton
|
f83c41fb3d |
KVM: arm64: Allow userspace to limit NV support to nVHE
NV is hard. No kidding. In order to make things simpler, we have established that NV would support two mutually exclusive configurations: - VHE-only, and supporting recursive virtualisation - nVHE-only, and not supporting recursive virtualisation For that purpose, introduce a new vcpu feature flag that denotes the second configuration. We use this flag to limit the idregs further. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Joey Gouly <joey.gouly@arm.com> Link: https://lore.kernel.org/r/20250220134907.554085-11-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
 Linus Torvalds
|
0f8e26b38d |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
|
||
|
Mark BrownandWill Deacon
|
819935464c |
arm64/hwcap: Describe 2024 dpISA extensions to userspace
The 2024 dpISA introduces a number of architecture features all of which only add new instructions so only require the addition of hwcaps and ID register visibility. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250107-arm64-2024-dpisa-v5-3-7578da51fc3d@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
 Sean Christopherson
|
915d2f0718 |
KVM: Move KVM_REG_SIZE() definition to common uAPI header
Define KVM_REG_SIZE() in the common kvm.h header, and delete the arm64 and RISC-V versions. As evidenced by the surrounding definitions, all aspects of the register size encoding are generic, i.e. RISC-V should have moved arm64's definition to common code instead of copy+pasting. Acked-by: Anup Patel <anup@brainfault.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20241128005547.4077116-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Linus Torvalds
|
9f16d5e6f2 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
||
|
Catalin Marinas
|
5a4332062e |
Merge branches 'for-next/gcs', 'for-next/probes', 'for-next/asm-offsets', 'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
||
 David WoodhouseandOliver Upton
|
97413cea1c |
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function which is analogous to ACPI S4 state. This will allow hosting environments to determine that a guest is hibernated rather than just powered off, and ensure that they preserve the virtual environment appropriately to allow the guest to resume safely (or bump the hardware_signature in the FACS to trigger a clean reboot instead). This feature is safe to enable unconditionally (in a subsequent commit) because it is exposed to userspace through the existing KVM_SYSTEM_EVENT_SHUTDOWN event, just with an additional flag which userspace can use to know that the instance intended hibernation instead of a plain power-off. As with SYSTEM_RESET2, there is only one type available (in this case HIBERNATE_OFF), and it is not explicitly reported to userspace through the event; userspace can get it from the registers if it cares). Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Miguel Luis <miguel.luis@oracle.com> Link: https://lore.kernel.org/r/20241019172459.2241939-3-dwmw2@infradead.org [oliver: slight cleanup of comments] Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Mark BrownandCatalin Marinas
|
ddadbcdaae |
arm64: Support AT_HWCAP3
We have filled all 64 bits of AT_HWCAP2 so in order to support discovery of further features provide the framework to use the already defined AT_HWCAP3 for further CPU features. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20241004-arm64-elf-hwcap3-v2-2-799d1daad8b0@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark BrownandCatalin Marinas
|
7ec3b57cb2 |
arm64/ptrace: Expose GCS via ptrace and core files
Provide a new register type NT_ARM_GCS reporting the current GCS mode and pointer for EL0. Due to the interactions with allocation and deallocation of Guarded Control Stacks we do not permit any changes to the GCS mode via ptrace, only GCSPR_EL0 may be changed. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-27-222b78d87eee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark BrownandCatalin Marinas
|
16f47bb9ac |
arm64/signal: Expose GCS state in signal frames
Add a context for the GCS state and include it in the signal context when running on a system that supports GCS. We reuse the same flags that the prctl() uses to specify which GCS features are enabled and also provide the current GCS pointer. We do not support enabling GCS via signal return, there is a conflict between specifying GCSPR_EL0 and allocation of a new GCS and this is not an ancticipated use case. We also enforce GCS configuration locking on signal return. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> Acked-by: Yury Khrustalev <yury.khrustalev@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-26-222b78d87eee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark BrownandCatalin Marinas
|
eefc98711f |
arm64/hwcap: Add hwcap for GCS
Provide a hwcap to enable userspace to detect support for GCS. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Yury Khrustalev <yury.khrustalev@arm.com> Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-18-222b78d87eee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Will Deacon
|
982a847c71 |
Merge branch 'for-next/poe' into for-next/core
* for-next/poe: (31 commits) arm64: pkeys: remove redundant WARN kselftest/arm64: Add test case for POR_EL0 signal frame records kselftest/arm64: parse POE_MAGIC in a signal frame kselftest/arm64: add HWCAP test for FEAT_S1POE selftests: mm: make protection_keys test work on arm64 selftests: mm: move fpregs printing kselftest/arm64: move get_header() arm64: add Permission Overlay Extension Kconfig arm64: enable PKEY support for CPUs with S1POE arm64: enable POE and PIE to coexist arm64/ptrace: add support for FEAT_POE arm64: add POE signal support arm64: implement PKEYS support arm64: add pte_access_permitted_no_overlay() arm64: handle PKEY/POE faults arm64: mask out POIndex when modifying a PTE arm64: convert protection key into vm_flags and pgprot values arm64: add POIndex defines arm64: re-order MTE VM_ flags arm64: enable the Permission Overlay Extension for EL0 ... |