Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
Move the arm-optimized CRC code from arch/arm/lib/crc* into its new
location in lib/crc/arm/, and wire it up in the new way. This new way
of organizing the CRC code eliminates the need to artificially split the
code for each CRC variant into separate arch and generic modules,
enabling better inlining and dead code elimination. For more details,
see "lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/".
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20250607200454.73587-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move the contents of arch/arm/lib/crypto/ into lib/crypto/arm/.
The new code organization makes a lot more sense for how this code
actually works and is developed. In particular, it makes it possible to
build each algorithm as a single module, with better inlining and dead
code elimination. For a more detailed explanation, see the patchset
which did this for the CRC library code:
https://lore.kernel.org/r/20250607200454.73587-1-ebiggers@kernel.org/.
Also see the patchset which did this for SHA-512:
https://lore.kernel.org/linux-crypto/20250616014019.415791-1-ebiggers@kernel.org/
This is just a preparatory commit, which does the move to get the files
into their new location but keeps them building the same way as before.
Later commits will make the actual improvements to the way the
arch-optimized code is integrated for each algorithm.
Add a gitignore entry for the removed directory arch/arm/lib/crypto/ so
that people don't accidentally commit leftover generated files.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20250619191908.134235-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
Add explicit array bounds to the function prototypes for the parameters
that didn't already get handled by the conversion to use chacha_state:
- chacha_block_*():
Change 'u8 *out' or 'u8 *stream' to u8 out[CHACHA_BLOCK_SIZE].
- hchacha_block_*():
Change 'u32 *out' or 'u32 *stream' to u32 out[HCHACHA_OUT_WORDS].
- chacha_init():
Change 'const u32 *key' to 'const u32 key[CHACHA_KEY_WORDS]'.
Change 'const u8 *iv' to 'const u8 iv[CHACHA_IV_SIZE]'.
No functional changes. This just makes it clear when fixed-size arrays
are expected.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ChaCha state matrix is 16 32-bit words. Currently it is represented
in the code as a raw u32 array, or even just a pointer to u32. This
weak typing is error-prone. Instead, introduce struct chacha_state:
struct chacha_state {
u32 x[16];
};
Convert all ChaCha and HChaCha functions to use struct chacha_state.
No functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the architecture-optimized CRC code do its CPU feature checks in
subsys_initcalls instead of arch_initcalls. This makes it consistent
with arch/*/lib/crypto/ and ensures that it runs after initcalls that
possibly could be a prerequisite for kernel-mode FPU, such as x86's
xfd_update_static_branch() and loongarch's init_euen_mask().
Note: as far as I can tell, x86's xfd_update_static_branch() isn't
*actually* needed for kernel-mode FPU. loongarch's init_euen_mask() is
needed to enable save/restore of the vector registers, but loongarch
doesn't yet have any CRC or crypto code that uses vector registers
anyway. Regardless, let's be consistent with arch/*/lib/crypto/ and
robust against any potential future dependency on an arch_initcall.
Link: https://lore.kernel.org/r/20250510035959.87995-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD and a SIMD block function
so that the caller can decide whether to use SIMD.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the block functions as GPL only, there is no reason
to let arbitrary modules use these internal functions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit c4741b2305.
Crypto API self-tests no longer run at registration time and now
occur either at late_initcall or upon the first use.
Therefore the premise of the above commit no longer exists. Revert
it and subsequent additions of subsys_initcall and arch_initcall.
Note that lib/crypto calls will stay at subsys_initcall (or rather
downgraded from arch_initcall) because they may need to occur
before Crypto API registration.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of providing crypto_shash algorithms for the arch-optimized
SHA-256 code, instead implement the SHA-256 library. This is much
simpler, it makes the SHA-256 library functions be arch-optimized, and
it fixes the longstanding issue where the arch-optimized SHA-256 was
disabled by default. SHA-256 still remains available through
crypto_shash, but individual architectures no longer need to handle it.
To merge the scalar, NEON, and CE code all into one module cleanly, add
!CPU_V7M as a direct dependency of the CE code. Previously, !CPU_V7M
was only a direct dependency of the scalar and NEON code. The result is
still the same because CPU_V7M implies !KERNEL_MODE_NEON, so !CPU_V7M
was already an indirect dependency of the CE code.
To match sha256_blocks_arch(), change the type of the nblocks parameter
of the assembly functions from int to size_t. The assembly functions
actually already treated it as size_t.
While renaming the assembly files, also fix the naming quirk where
"sha2" meant sha256. (SHA-512 is also part of SHA-2.)
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that every architecture provides a block function, use that
to implement the lib/poly1305 and remove the old per-arch code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The use of the term "glue" in filenames is a Crypto API-ism that rarely
shows up elsewhere in lib/ or arch/*/lib/. I think adopting it there
was a mistake. The library just uses standard functions, so the amount
of code that could be considered "glue" is quite small. And while often
the C functions just wrap the assembly functions, there are also cases
like crc32c_arch() in arch/x86/lib/crc32-glue.c that blur the line by
in-lining the actual implementation into the C function. That's not
"glue code", but rather the actual code.
Therefore, let's drop "glue" from the filenames and instead use e.g.
crc32.c instead of crc32-glue.c.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250424002038.179114-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that the architecture-optimized Poly1305 kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_POLY1305 to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_POLY1305_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_POLY1305 directly. Finally, make the fallback to
the generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the architecture-optimized ChaCha kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_CHACHA to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_CHACHA_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_CHACHA directly. Finally, make the fallback to the
generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the arm BLAKE2s, ChaCha, and Poly1305
library functions into a new directory arch/arm/lib/crypto/ that does
not depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following the standardization on crc32c() as the lib entry point for the
Castagnoli CRC32 instead of the previous mix of crc32c(), crc32c_le(),
and __crc32c_le(), make the same change to the underlying base and arch
functions that implement it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Move the arm CRC-T10DIF assembly code into the lib directory and wire it
up to the library interface. This allows it to be used without going
through the crypto API. It remains usable via the crypto API too via
the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.
Note: to see the diff from arch/arm/crypto/crct10dif-ce-glue.c to
arch/arm/lib/crc-t10dif-glue.c, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241202012056.209768-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Christoph HellwigandAndrew Morton
Linus Torvalds
Eric Biggers
Eric BiggersandHerbert Xu