mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
master
734
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Ninad Naik
|
80f4a7b8ce |
Documentation: kvm: update links in the references section of AMD Memory Encryption
Replace non-working links in the reference section with the working ones. Signed-off-by: Ninad Naik <ninadnaik07@gmail.com> Link: https://patch.msgid.link/20260511174302.811918-1-ninadnaik07@gmail.com/ Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
 Paolo Bonzini
|
6b80203187 |
Merge tag 'kvm-s390-next-7.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- ESA nesting support - 4k memslots - LPSW/E fix |
||
 Marc Zyngier
|
83a3980750 |
Merge branch kvm-arm64/pkvm-protected-guest into kvmarm-master/next
* kvm-arm64/pkvm-protected-guest: (41 commits) : . : pKVM support for protected guests, implementing the very long : awaited support for anonymous memory, as the elusive guestmem : has failed to deliver on its promises despite a multi-year : effort. Patches courtesy of Will Deacon. From the initial cover : letter: : : "[...] this patch series implements support for protected guest : memory with pKVM, where pages are unmapped from the host as they are : faulted into the guest and can be shared back from the guest using pKVM : hypercalls. Protected guests are created using a new machine type : identifier and can be booted to a shell using the kvmtool patches : available at [2], which finally means that we are able to test the pVM : logic in pKVM. Since this is an incremental step towards full isolation : from the host (for example, the CPU register state and DMA accesses are : not yet isolated), creating a pVM requires a developer Kconfig option to : be enabled in addition to booting with 'kvm-arm.mode=protected' and : results in a kernel taint." : . KVM: arm64: Don't hold 'vm_table_lock' across guest page reclaim KVM: arm64: Allow get_pkvm_hyp_vm() to take a reference to a dying VM KVM: arm64: Prevent teardown finalisation of referenced 'hyp_vm' drivers/virt: pkvm: Add Kconfig dependency on DMA_RESTRICTED_POOL KVM: arm64: Rename PKVM_PAGE_STATE_MASK KVM: arm64: Extend pKVM page ownership selftests to cover guest hvcs KVM: arm64: Extend pKVM page ownership selftests to cover forced reclaim KVM: arm64: Register 'selftest_vm' in the VM table KVM: arm64: Extend pKVM page ownership selftests to cover guest donation KVM: arm64: Add some initial documentation for pKVM KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled KVM: arm64: Implement the MEM_UNSHARE hypercall for protected VMs KVM: arm64: Implement the MEM_SHARE hypercall for protected VMs KVM: arm64: Add hvc handler at EL2 for hypercalls from protected VMs KVM: arm64: Return -EFAULT from VCPU_RUN on access to a poisoned pte KVM: arm64: Reclaim faulting page from pKVM in spurious fault handler KVM: arm64: Introduce hypercall to force reclaim of a protected page KVM: arm64: Annotate guest donations with handle and gfn in host stage-2 KVM: arm64: Change 'pkvm_handle_t' to u16 KVM: arm64: Introduce host_stage2_set_owner_metadata_locked() ... Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
 Hendrik Brueckner
|
4aebd7d5c7 |
KVM: s390: Add KVM capability for ESA mode guests
Now that all the bits are properly addressed, provide a mechanism for testing ESA mode guests in nested configurations. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> [farman@us.ibm.com: Updated commit message] Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> |
||
 Will Deacon
|
287c6981f1 |
KVM: arm64: Add some initial documentation for pKVM
Add some initial documentation for pKVM to help people understand what is supported, the limitations of protected VMs when compared to non-protected VMs and also what is left to do. Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Tested-by: Mostafa Saleh <smostafa@google.com> Signed-off-by: Will Deacon <will@kernel.org> Link: https://patch.msgid.link/20260330144841.26181-33-will@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
 Sascha Bischoff
|
d51c978b7d |
KVM: arm64: gic-v5: Communicate userspace-driveable PPIs via a UAPI
GICv5 systems will likely not support the full set of PPIs. The presence of any virtual PPI is tied to the presence of the physical PPI. Therefore, the available PPIs will be limited by the physical host. Userspace cannot drive any PPIs that are not implemented. Moreover, it is not desirable to expose all PPIs to the guest in the first place, even if they are supported in hardware. Some devices, such as the arch timer, are implemented in KVM, and hence those PPIs shouldn't be driven by userspace, either. Provided a new UAPI: KVM_DEV_ARM_VGIC_GRP_CTRL => KVM_DEV_ARM_VGIC_USERPSPACE_PPIs This allows userspace to query which PPIs it is able to drive via KVM_IRQ_LINE. Additionally, introduce a check in kvm_vm_ioctl_irq_line() to reject any PPIs not in the userspace mask. Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://patch.msgid.link/20260319154937.3619520-40-sascha.bischoff@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Sascha Bischoff
|
eb3c4d2c9a |
Documentation: KVM: Introduce documentation for VGICv5
Now that it is possible to create a VGICv5 device, provide initial documentation for it. At this stage, there is little to document. Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://patch.msgid.link/20260319154937.3619520-39-sascha.bischoff@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Sascha Bischoff
|
7c31c06e2d |
KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5
Make it mandatory to use the architected PPI when running a GICv5 guest. Attempts to set anything other than the architected PPI (23) are rejected. Additionally, KVM_ARM_VCPU_PMU_V3_INIT is relaxed to no longer require KVM_ARM_VCPU_PMU_V3_IRQ to be called for GICv5-based guests. In this case, the architectued PPI is automatically used. Documentation is bumped accordingly. Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Joey Gouly <joey.gouly@arm.com> Link: https://patch.msgid.link/20260319154937.3619520-33-sascha.bischoff@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
 Sascha BischoffandTimothy Hayes
|
b88d05a893 |
KVM: arm64: gic-v5: Support GICv5 interrupts with KVM_IRQ_LINE
Interrupts under GICv5 look quite different to those from older Arm GICs. Specifically, the type is encoded in the top bits of the interrupt ID. Extend KVM_IRQ_LINE to cope with GICv5 PPIs and SPIs. The requires subtly changing the KVM_IRQ_LINE API for GICv5 guests. For older Arm GICs, PPIs had to be in the range of 16-31, and SPIs had to be 32-1019, but this no longer holds true for GICv5. Instead, for a GICv5 guest support PPIs in the range of 0-127, and SPIs in the range 0-65535. The documentation is updated accordingly. The SPI range doesn't cover the full SPI range that a GICv5 system can potentially cope with (GICv5 provides up to 24-bits of SPI ID space, and we only have 16 bits to work with in KVM_IRQ_LINE). However, 65k SPIs is more than would be reasonably expected on systems for years to come. In order to use vgic_is_v5(), the kvm/arm_vgic.h header is added to kvm/arm.c. Note: As the GICv5 KVM implementation currently doesn't support injecting SPIs attempts to do so will fail. This restriction will by lifted as the GICv5 KVM support evolves. Co-authored-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://patch.msgid.link/20260319154937.3619520-28-sascha.bischoff@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Paolo Bonzini
|
dca01b0a26 |
Documentation: kvm: fix formatting of the quirks table
A recently added quirk does not fit in the left column of the table, so it all has to be reformatted and realigned. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
 Jim Mattson
|
e2ffe85b6d |
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
Add KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM to allow L1 to set FREEZE_IN_SMM in vmcs12's GUEST_IA32_DEBUGCTL field, as permitted prior to commit |
||
|
Paolo Bonzini
|
94fe3e6515 |
Merge tag 'kvm-x86-generic-7.0-rc3' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 7.0 - Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being unnecessary and confusing, triggered compiler warnings due to -Wflex-array-member-not-at-end. - Document that vcpu->mutex is take outside of kvm->slots_lock and kvm->slots_arch_lock, which is intentional and desirable despite being rather unintuitive. |
||
 Sean Christopherson
|
f8211e95df |
Documentation: KVM: Formalizing taking vcpu->mutex *outside* of kvm->slots_lock
Explicitly document the ordering of vcpu->mutex being taken *outside* of
kvm->slots_lock. While somewhat unintuitive since vCPUs conceptually have
narrower scope than VMs, the scope of the owning object (vCPU versus VM)
doesn't automatically carry over to the lock. In this case, vcpu->mutex
has far broader scope than kvm->slots_lock. As Paolo put it, it's a
"don't worry about multiple ioctls at the same time" mutex that's intended
to be taken at the outer edges of KVM.
More importantly, arm64 and x86 have gained flows that take kvm->slots_lock
inside of vcpu->mutex. x86's kvm_inhibit_apic_access_page() is particularly
nasty, as slots_lock is taken quite deep within KVM_RUN, i.e. simply
swapping the ordering isn't an option.
Commit to the vcpu->mutex => kvm->slots_lock ordering, as vcpu->mutex
really is intended to be a "top-level" lock, whereas kvm->slots_lock is
"just" a helper lock.
Opportunistically document that vcpu->mutex is also taken outside of
slots_arch_lock, e.g. when allocating shadow roots on x86 (which is the
entire reason slots_arch_lock exists, as shadow roots must be allocated
while holding kvm->srcu)
kvm_mmu_new_pgd()
|
-> kvm_mmu_reload()
|
-> kvm_mmu_load()
|
-> mmu_alloc_shadow_roots()
|
-> mmu_first_shadow_root_alloc()
but also when manipulating memslots in vCPU context, e.g. when inhibiting
the APIC-access page via the aforementioned kvm_inhibit_apic_access_page()
kvm_inhibit_apic_access_page()
|
-> __x86_set_memory_region()
|
-> kvm_set_internal_memslot()
|
-> kvm_set_memory_region()
|
-> kvm_set_memslot()
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260302170239.596810-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
||
|
Paolo Bonzini
|
70295a479d |
KVM: always define KVM_CAP_SYNC_MMU
KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always available. Move the definition from individual architectures to common code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
 Linus Torvalds
|
cb5573868e |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Loongarch:
- Add more CPUCFG mask bits
- Improve feature detection
- Add lazy load support for FPU and binary translation (LBT) register
state
- Fix return value for memory reads from and writes to in-kernel
devices
- Add support for detecting preemption from within a guest
- Add KVM steal time test case to tools/selftests
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers
- More pKVM fixes for features that are not supposed to be exposed to
guests
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest
- Preliminary work for guest GICv5 support
- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures
- A small set of FPSIMD cleanups
- Selftest fixes addressing the incorrect alignment of page
allocation
- Other assorted low-impact fixes and spelling fixes
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).
KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.
For more information, see the commit message for merge commit
|
||
|
Paolo Bonzini
|
b1195183ed |
Merge tag 'kvm-s390-next-7.0-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- gmap rewrite: completely new memory management for kvm/s390 - vSIE improvement - maintainership change for s390 vfio-pci - small quality of life improvement for protected guests |
||
|
Paolo Bonzini
|
9123c5f956 |
Merge tag 'kvm-x86-gmem-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM guest_memfd changes for 6.20 - Remove kvm_gmem_populate()'s preparation tracking and half-baked hugepage handling, and instead rely on SNP (the only user of the tracking) to do its own tracking via the RMP. - Retroactively document and enforce (for SNP) that KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the source page to be 4KiB aligned, to avoid non-trivial complexity for a non-existent usecase (and because in-place conversion simply can't support unaligned sources). - When populating guest_memfd memory, GUP the source page in common code and pass the refcounted page to the vendor callback, instead of letting vendor code do the heavy lifting. Doing so avoids a looming deadlock bug with in-place due an AB-BA conflict betwee mmap_lock and guest_memfd's filemap invalidate lock. |
||
|
Linus Torvalds
|
72c395024d |
Merge tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
|
||
|
Paolo Bonzini
|
9e03b7caf4 |
Merge tag 'kvm-x86-misc-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.20 - Disallow changing the virtual CPU model if L2 is active, for all the same reasons KVM disallows change the model after the first KVM_RUN. - Fix a bug where KVM would incorrectly reject host accesses to PV MSRs that were advertised as supported to userspace when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled. - Fix a bug where KVM would attempt to read protect guest state (CR3) when configuring an async #PF entry. - Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM (for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL. Explicitly allow the few exports that are intended for external usage. - Ignore -EBUSY when checking nested events after a vCPU exits blocking as the WARN is user-triggerable, and because exiting to userspace on -EBUSY does more harm than good in pretty much every situation. - Throw in the towel and drop the WARN on INIT/SIPI being blocked when vCPU is in Wait-For-SIPI, as playing whack-a-mole with syzkaller turned out to be an unwinnable game. - Add support for new Intel instructions that don't require anything beyond enumerating feature flags to userspace. - Grab SRCU when reading PDPTRs in KVM_GET_SREGS2. - Add WARNs to guard against modifying KVM's CPU caps outside of the intended setup flow, as nested VMX in particular is sensitive to unexpected changes in KVM's golden configuration. - Add a quirk to allow userspace to opt-in to actually suppress EOI broadcasts when the suppression feature is enabled by the guest (currently limited to split IRQCHIP, i.e. userspace I/O APIC). Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an option as some userspaces have come to rely on KVM's buggy behavior (KVM advertises Supress EOI Broadcast irrespective of whether or not userspace I/O APIC supports Directed EOIs). - Minor cleanups. |
||
|
Paolo Bonzini
|
4215ee0d7b |
Merge tag 'kvm-x86-svm-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.20 - Drop a user-triggerable WARN on nested_svm_load_cr3() failure. - Add support for virtualizing ERAPS. Note, correct virtualization of ERAPS relies on an upcoming, publicly announced change in the APM to reduce the set of conditions where hardware (i.e. KVM) *must* flush the RAP. - Ignore nSVM intercepts for instructions that are not supported according to L1's virtual CPU model. - Add support for expedited writes to the fast MMIO bus, a la VMX's fastpath for EPT Misconfig. - Don't set GIF when clearing EFER.SVME, as GIF exists independently of SVM, and allow userspace to restore nested state with GIF=0. - Treat exit_code as an unsigned 64-bit value through all of KVM. - Add support for fetching SNP certificates from userspace. - Fix a bug where KVM would use vmcb02 instead of vmcb01 when emulating VMLOAD or VMSAVE on behalf of L2. - Misc fixes and cleanups. |
||
 Claudio Imbrenda
|
0ee4ddc164 |
KVM: s390: Storage key manipulation IOCTL
Add a new IOCTL to allow userspace to manipulate storage keys directly. This will make it easier to write selftests related to storage keys. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
 Khushit Shah
|
6517dfbcc9 |
KVM: x86: Add x2APIC "features" to control EOI broadcast suppression
Add two flags for KVM_CAP_X2APIC_API to allow userspace to control support for Suppress EOI Broadcasts when using a split IRQCHIP (I/O APIC emulated by userspace), which KVM completely mishandles. When x2APIC support was first added, KVM incorrectly advertised and "enabled" Suppress EOI Broadcast, without fully supporting the I/O APIC side of the equation, i.e. without adding directed EOI to KVM's in-kernel I/O APIC. That flaw was carried over to split IRQCHIP support, i.e. KVM advertised support for Suppress EOI Broadcasts irrespective of whether or not the userspace I/O APIC implementation supported directed EOIs. Even worse, KVM didn't actually suppress EOI broadcasts, i.e. userspace VMMs without support for directed EOI came to rely on the "spurious" broadcasts. KVM "fixed" the in-kernel I/O APIC implementation by completely disabling support for Suppress EOI Broadcasts in commit |
||
 Jani Nikula
|
a592a36e49 |
Documentation: use a source-read extension for the index link boilerplate
The root document usually has a special :ref:`genindex` link to the generated index. This is also the case for Documentation/index.rst. The other index.rst files deeper in the directory hierarchy usually don't. For SPHINXDIRS builds, the root document isn't Documentation/index.rst, but some other index.rst in the hierarchy. Currently they have a ".. only::" block to add the index link when doing SPHINXDIRS html builds. This is obviously very tedious and repetitive. The link is also added to all index.rst files in the hierarchy for SPHINXDIRS builds, not just the root document. Put the boilerplate in a sphinx-includes/subproject-index.rst file, and include it at the end of the root document for subproject builds in an ad-hoc source-read extension defined in conf.py. For now, keep having the boilerplate in translations, because this approach currently doesn't cover translated index link headers. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> [jc: did s/doctree/kern_doc_dir/ ] Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20260123143149.2024303-1-jani.nikula@intel.com> |
||
 Michael Roth
|
20c3c4108d |
KVM: SEV: Add KVM_SEV_SNP_ENABLE_REQ_CERTS command
Introduce a new command for KVM_MEMORY_ENCRYPT_OP ioctl that can be used to enable fetching of endorsement key certificates from userspace via the new KVM_EXIT_SNP_REQ_CERTS exit type. Also introduce a new KVM_X86_SEV_SNP_REQ_CERTS KVM device attribute so that userspace can query whether the kernel supports the new command/exit. Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Tested-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Link: https://patch.msgid.link/20260109231732.1160759-3-michael.roth@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Michael Roth
|
fa9893fadb |
KVM: Introduce KVM_EXIT_SNP_REQ_CERTS for SNP certificate-fetching
For SEV-SNP, the host can optionally provide a certificate table to the
guest when it issues an attestation request to firmware (see GHCB 2.0
specification regarding "SNP Extended Guest Requests"). This certificate
table can then be used to verify the endorsement key used by firmware to
sign the attestation report.
While it is possible for guests to obtain the certificates through other
means, handling it via the host provides more flexibility in being able
to keep the certificate data in sync with the endorsement key throughout
host-side operations that might resulting in the endorsement key
changing.
In the case of KVM, userspace will be responsible for fetching the
certificate table and keeping it in sync with any modifications to the
endorsement key by other userspace management tools. Define a new
KVM_EXIT_SNP_REQ_CERTS event where userspace is provided with the GPA of
the buffer the guest has provided as part of the attestation request so
that userspace can write the certificate data into it while relying on
filesystem-based locking to keep the certificates up-to-date relative to
the endorsement keys installed/utilized by firmware at the time the
certificates are fetched.
[Melody: Update the documentation scheme about how file locking is
expected to happen.]
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Melody Wang <huibo.wang@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://patch.msgid.link/20260109231732.1160759-2-michael.roth@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|