netlink: specs: clean up spaces in brackets

Clean up all space inside brackets errors reported by yamllint in
the netlink specs:

    error    too many spaces inside brackets  (brackets)

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/netlink/specs/dpll.yaml

@@ -445,7 +445,7 @@ operations:
       doc: |
         Get id of dpll device that matches given attributes
       attribute-set: dpll
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         pre: dpll-lock-doit
@@ -464,7 +464,7 @@ operations:
       doc: |
         Get list of DPLL devices (dump) or attributes of a single dpll device
       attribute-set: dpll
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         pre: dpll-pre-doit
@@ -491,7 +491,7 @@ operations:
       name: device-set
       doc: Set attributes for a DPLL device
       attribute-set: dpll
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         pre: dpll-pre-doit
@@ -519,7 +519,7 @@ operations:
       doc: |
         Get id of a pin that matches given attributes
       attribute-set: pin
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         pre: dpll-lock-doit
@@ -547,7 +547,7 @@ operations:
           a given dpll device
         - do request with target dpll and target pin - single pin attributes
       attribute-set: pin
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         pre: dpll-pin-pre-doit
@@ -585,7 +585,7 @@ operations:
       name: pin-set
       doc: Set attributes of a target pin
       attribute-set: pin
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         pre: dpll-pin-pre-doit

Documentation/netlink/specs/ethtool.yaml

@@ -12,7 +12,7 @@ definitions:
     name: udp-tunnel-type
     enum-name:
     type: enum
-    entries: [ vxlan, geneve, vxlan-gpe ]
+    entries: [vxlan, geneve, vxlan-gpe]
     enum-cnt-name: __ethtool-udp-tunnel-type-cnt
     render-max: true
   -
@@ -93,11 +93,11 @@ definitions:
     header: linux/ethtool.h
     type: enum
     name-prefix: phy-upstream
-    entries: [ mac, phy ]
+    entries: [mac, phy]
   -
     name: tcp-data-split
     type: enum
-    entries: [ unknown, disabled, enabled ]
+    entries: [unknown, disabled, enabled]
   -
     name: hwtstamp-source
     doc: Source of the hardware timestamp
@@ -1224,7 +1224,7 @@ attribute-sets:
       -
         name: stat
         type: u64
-        type-value: [ id ]
+        type-value: [id]
       -
         name: hist-rx
         type: nest

Documentation/netlink/specs/fou.yaml

@@ -18,7 +18,7 @@ definitions:
     name: encap_type
     name-prefix: fou-encap-
     enum-name:
-    entries: [ unspec, direct, gue ]
+    entries: [unspec, direct, gue]
 
 attribute-sets:
   -
@@ -81,8 +81,8 @@ operations:
       doc: Add port.
       attribute-set: fou
 
-      dont-validate: [ strict, dump ]
+      dont-validate: [strict, dump]
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         request: &all_attrs
@@ -103,8 +103,8 @@ operations:
       doc: Delete port.
       attribute-set: fou
 
-      dont-validate: [ strict, dump ]
+      dont-validate: [strict, dump]
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         request: &select_attrs
@@ -122,7 +122,7 @@ operations:
       name: get
       doc: Get tunnel info.
       attribute-set: fou
-      dont-validate: [ strict, dump ]
+      dont-validate: [strict, dump]
 
       do:
         request: *select_attrs

Documentation/netlink/specs/handshake.yaml

@@ -16,17 +16,17 @@ definitions:
     type: enum
     name: handler-class
     value-start: 0
-    entries: [ none, tlshd, max ]
+    entries: [none, tlshd, max]
   -
     type: enum
     name: msg-type
     value-start: 0
-    entries: [ unspec, clienthello, serverhello ]
+    entries: [unspec, clienthello, serverhello]
   -
     type: enum
     name: auth
     value-start: 0
-    entries: [ unspec, unauth, psk, x509 ]
+    entries: [unspec, unauth, psk, x509]
 
 attribute-sets:
   -
@@ -95,7 +95,7 @@ operations:
       name: accept
       doc: Handler retrieves next queued handshake request
       attribute-set: accept
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       do:
         request:
           attributes:

Documentation/netlink/specs/lockd.yaml

@@ -26,7 +26,7 @@ operations:
       name: server-set
       doc: set the lockd server parameters
       attribute-set: server
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       do:
         request:
           attributes:

Documentation/netlink/specs/mptcp_pm.yaml

@@ -277,8 +277,8 @@ operations:
       name: add-addr
       doc: Add endpoint
       attribute-set: endpoint
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ uns-admin-perm ]
+      flags: [uns-admin-perm]
       do: &add-addr-attrs
         request:
           attributes:
@@ -287,14 +287,14 @@ operations:
       name: del-addr
       doc: Delete endpoint
       attribute-set: endpoint
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ uns-admin-perm ]
+      flags: [uns-admin-perm]
       do: *add-addr-attrs
     -
       name: get-addr
       doc: Get endpoint information
       attribute-set: attr
-      dont-validate: [ strict ]
+      dont-validate: [strict]
       do: &get-addr-attrs
         request:
           attributes:
@@ -311,15 +311,15 @@ operations:
       name: flush-addrs
       doc: Flush addresses
       attribute-set: endpoint
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ uns-admin-perm ]
+      flags: [uns-admin-perm]
       do: *add-addr-attrs
     -
       name: set-limits
       doc: Set protocol limits
       attribute-set: attr
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ uns-admin-perm ]
+      flags: [uns-admin-perm]
       do: &mptcp-limits
         request:
           attributes:
@@ -329,7 +329,7 @@ operations:
       name: get-limits
       doc: Get protocol limits
       attribute-set: attr
-      dont-validate: [ strict ]
+      dont-validate: [strict]
       do: &mptcp-get-limits
         request:
            attributes:
@@ -343,8 +343,8 @@ operations:
       name: set-flags
       doc: Change endpoint flags
       attribute-set: attr
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ uns-admin-perm ]
+      flags: [uns-admin-perm]
       do: &mptcp-set-flags
         request:
           attributes:
@@ -355,8 +355,8 @@ operations:
       name: announce
       doc: Announce new address
       attribute-set: attr
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ uns-admin-perm ]
+      flags: [uns-admin-perm]
       do: &announce-add
         request:
           attributes:
@@ -366,8 +366,8 @@ operations:
       name: remove
       doc: Announce removal
       attribute-set: attr
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ uns-admin-perm ]
+      flags: [uns-admin-perm]
       do:
         request:
          attributes:
@@ -377,8 +377,8 @@ operations:
       name: subflow-create
       doc: Create subflow
       attribute-set: attr
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ uns-admin-perm ]
+      flags: [uns-admin-perm]
       do: &sf-create
         request:
           attributes:
@@ -389,6 +389,6 @@ operations:
       name: subflow-destroy
       doc: Destroy subflow
       attribute-set: attr
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ uns-admin-perm ]
+      flags: [uns-admin-perm]
       do: *sf-create

Documentation/netlink/specs/net_shaper.yaml

@@ -244,7 +244,7 @@ operations:
         The set operation can't be used to create a @node scope shaper,
         use the @group operation instead.
       attribute-set: net-shaper
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         pre: net-shaper-nl-pre-doit
@@ -275,7 +275,7 @@ operations:
         node with infinite bandwidth. The queue's implicit node
         feeds an implicit RR node at the root of the hierarchy.
       attribute-set: net-shaper
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         pre: net-shaper-nl-pre-doit
@@ -306,7 +306,7 @@ operations:
         full identifier, comprising @binding and @handle, is provided
         as the reply.
       attribute-set: net-shaper
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         pre: net-shaper-nl-pre-doit

Documentation/netlink/specs/netdev.yaml

@@ -77,11 +77,11 @@ definitions:
   -
     name: queue-type
     type: enum
-    entries: [ rx, tx ]
+    entries: [rx, tx]
   -
     name: qstats-scope
     type: flags
-    entries: [ queue ]
+    entries: [queue]
 
 attribute-sets:
   -
@@ -721,7 +721,7 @@ operations:
       name: bind-rx
       doc: Bind dmabuf to netdev
       attribute-set: dmabuf
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       do:
         request:
           attributes:
@@ -735,7 +735,7 @@ operations:
       name: napi-set
       doc: Set configurable NAPI instance settings.
       attribute-set: napi
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       do:
         request:
           attributes:
@@ -757,7 +757,7 @@ operations:
             - id
 
 kernel-family:
-  headers: [ "net/netdev_netlink.h"]
+  headers: ["net/netdev_netlink.h"]
   sock-priv: struct netdev_nl_sock
 
 mcast-groups:

Documentation/netlink/specs/nfsd.yaml

@@ -151,7 +151,7 @@ operations:
       name: threads-set
       doc: set the number of running threads
       attribute-set: server
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       do:
         request:
           attributes:
@@ -174,7 +174,7 @@ operations:
       name: version-set
       doc: set nfs enabled versions
       attribute-set: server-proto
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       do:
         request:
           attributes:
@@ -191,7 +191,7 @@ operations:
       name: listener-set
       doc: set nfs running sockets
       attribute-set: server-sock
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       do:
         request:
           attributes:
@@ -208,7 +208,7 @@ operations:
       name: pool-mode-set
       doc: set the current server pool-mode
       attribute-set: pool-mode
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       do:
         request:
           attributes:

Documentation/netlink/specs/nlctrl.yaml

@@ -76,12 +76,12 @@ attribute-sets:
       -
         name: policy
         type: nest-type-value
-        type-value: [ policy-id, attr-id ]
+        type-value: [policy-id, attr-id]
         nested-attributes: policy-attrs
       -
         name: op-policy
         type: nest-type-value
-        type-value: [ op-id ]
+        type-value: [op-id]
         nested-attributes: op-policy-attrs
       -
         name: op

Documentation/netlink/specs/ovpn.yaml

@@ -19,7 +19,7 @@ definitions:
   -
     type: enum
     name: cipher-alg
-    entries: [ none, aes-gcm, chacha20-poly1305 ]
+    entries: [none, aes-gcm, chacha20-poly1305]
   -
     type: enum
     name: del-peer-reason
@@ -32,7 +32,7 @@ definitions:
   -
     type: enum
     name: key-slot
-    entries: [ primary, secondary ]
+    entries: [primary, secondary]
 
 attribute-sets:
   -
@@ -241,7 +241,7 @@ operations:
     -
       name: peer-new
       attribute-set: ovpn
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       doc: Add a remote peer
       do:
         pre: ovpn-nl-pre-doit
@@ -253,7 +253,7 @@ operations:
     -
       name: peer-set
       attribute-set: ovpn
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       doc: modify a remote peer
       do:
         pre: ovpn-nl-pre-doit
@@ -265,7 +265,7 @@ operations:
     -
       name: peer-get
       attribute-set: ovpn
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       doc: Retrieve data about existing remote peers (or a specific one)
       do:
         pre: ovpn-nl-pre-doit
@@ -287,7 +287,7 @@ operations:
     -
       name: peer-del
       attribute-set: ovpn
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       doc: Delete existing remote peer
       do:
         pre: ovpn-nl-pre-doit
@@ -305,7 +305,7 @@ operations:
     -
       name: key-new
       attribute-set: ovpn
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       doc: Add a cipher key for a specific peer
       do:
         pre: ovpn-nl-pre-doit
@@ -317,7 +317,7 @@ operations:
     -
       name: key-get
       attribute-set: ovpn
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       doc: Retrieve non-sensitive data about peer key and cipher
       do:
         pre: ovpn-nl-pre-doit
@@ -332,7 +332,7 @@ operations:
     -
       name: key-swap
       attribute-set: ovpn
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       doc: Swap primary and secondary session keys for a specific peer
       do:
         pre: ovpn-nl-pre-doit
@@ -351,7 +351,7 @@ operations:
     -
       name: key-del
       attribute-set: ovpn
-      flags: [ admin-perm ]
+      flags: [admin-perm]
       doc: Delete cipher key for a specific peer
       do:
         pre: ovpn-nl-pre-doit

Documentation/netlink/specs/ovs_vport.yaml

@@ -21,7 +21,7 @@ definitions:
     type: enum
     enum-name: ovs-vport-type
     name-prefix: ovs-vport-type-
-    entries: [ unspec, netdev, internal, gre, vxlan, geneve ]
+    entries: [unspec, netdev, internal, gre, vxlan, geneve]
   -
     name: ovs-vport-stats
     type: struct

Documentation/netlink/specs/tcp_metrics.yaml

@@ -133,7 +133,7 @@ operations:
       doc: Retrieve metrics.
       attribute-set: tcp-metrics
 
-      dont-validate: [ strict, dump ]
+      dont-validate: [strict, dump]
 
       do:
         request: &sel_attrs
@@ -162,8 +162,8 @@ operations:
       doc: Delete metrics.
       attribute-set: tcp-metrics
 
-      dont-validate: [ strict, dump ]
+      dont-validate: [strict, dump]
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         request: *sel_attrs

Documentation/netlink/specs/team.yaml

@@ -152,7 +152,7 @@ operations:
       doc: No operation
       value: 0
       attribute-set: team
-      dont-validate: [ strict ]
+      dont-validate: [strict]
 
       do:
         # Actually it only reply the team netlink family
@@ -164,8 +164,8 @@ operations:
       name: options-set
       doc: Set team options
       attribute-set: team
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         request: &option_attrs
@@ -178,8 +178,8 @@ operations:
       name: options-get
       doc: Get team options info
       attribute-set: team
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         request:
@@ -191,8 +191,8 @@ operations:
       name: port-list-get
       doc: Get team ports info
       attribute-set: team
-      dont-validate: [ strict ]
+      dont-validate: [strict]
-      flags: [ admin-perm ]
+      flags: [admin-perm]
 
       do:
         request: