diff --git a/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi b/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi
index 6b4747025b9f..ced9051651d4 100644
--- a/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmh0104-glymur.dtsi
@@ -46,7 +46,45 @@
 			};
 		};
 
-		pmh0104-l1-thermal {
+		pmh0104_i1_thermal: pmh0104-i1-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pmh0104_i_e1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmh0104_j1_thermal: pmh0104-j1-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pmh0104_j_e1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmh0104_l1_thermal: pmh0104-l1-thermal {
 			polling-delay-passive = <100>;
 			thermal-sensors = <&pmh0104_l_e1_temp_alarm>;
 
@@ -118,6 +156,54 @@
 };
 
 &spmi_bus1 {
+	pmh0104_i_e1: pmic@8 {
+		compatible = "qcom,pmh0104", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmh0104_i_e1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmh0104_i_e1_gpios: gpio@8800 {
+			compatible = "qcom,pmh0104-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmh0104_i_e1_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmh0104_j_e1: pmic@9 {
+		compatible = "qcom,pmh0104", "qcom,spmi-pmic";
+		reg = <0x9 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmh0104_j_e1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmh0104_j_e1_gpios: gpio@8800 {
+			compatible = "qcom,pmh0104-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmh0104_j_e1_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	pmh0104_l_e1: pmic@b {
 		compatible = "qcom,pmh0104", "qcom,spmi-pmic";
 		reg = <0xb SPMI_USID>;
diff --git a/arch/arm64/boot/dts/qcom/pmh0110-glymur.dtsi b/arch/arm64/boot/dts/qcom/pmh0110-glymur.dtsi
index 7655bc030348..c2d0b9597818 100644
--- a/arch/arm64/boot/dts/qcom/pmh0110-glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmh0110-glymur.dtsi
@@ -46,7 +46,7 @@
 			};
 		};
 
-		pmh0110-h0-thermal {
+		pmh0110_h0_thermal: pmh0110-h0-thermal {
 			polling-delay-passive = <100>;
 			thermal-sensors = <&pmh0110_h_e0_temp_alarm>;