reset: eyeq: add platform driver

Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H
SoCs. Instances belong to a shared register region called OLB and gets
spawned as auxiliary device to the platform driver for clock.

There is one OLB instance for EyeQ5 and EyeQ6L. There are seven OLB
instances on EyeQ6H; three have a reset controller embedded:
 - West and east get handled by the same compatible.
 - Acc (accelerator) is another one.

Each instance vary in the number and types of reset domains.
Instances with single domain expect a single cell, others two.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-2-00b870a6a2ff@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

drivers/reset/Kconfig

@@ -66,6 +66,19 @@ config RESET_BRCMSTB_RESCAL
 	  This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
 	  BCM7216.
 
+config RESET_EYEQ
+	bool "Mobileye EyeQ reset controller"
+	depends on MACH_EYEQ5 || MACH_EYEQ6H || COMPILE_TEST
+	select AUXILIARY_BUS
+	default MACH_EYEQ5 || MACH_EYEQ6H
+	help
+	  This enables the Mobileye EyeQ reset controller, used in EyeQ5, EyeQ6L
+	  and EyeQ6H SoCs.
+
+	  It has one or more domains, with a varying number of resets in each.
+	  Registers are located in a shared register region called OLB. EyeQ6H
+	  has multiple reset instances.
+
 config RESET_GPIO
 	tristate "GPIO reset controller"
 	depends on GPIOLIB

drivers/reset/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
 obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o
 obj-$(CONFIG_RESET_BRCMSTB_RESCAL) += reset-brcmstb-rescal.o
+obj-$(CONFIG_RESET_EYEQ) += reset-eyeq.o
 obj-$(CONFIG_RESET_GPIO) += reset-gpio.o
 obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o