Add default handler for non-jump instructions. This really only has an
effect on instructions that compute a PC-relative address, such as
'adrp,' as seen in these couple of examples:
BEFORE: adrp x0, ffff20000aa11000 <kallsyms_token_index+0xce000>
AFTER: adrp x0, kallsyms_token_index+0xce000
BEFORE: adrp x23, ffff20000ae94000 <__per_cpu_load>
AFTER: adrp x23, __per_cpu_load
The implementation is identical to that of s390, but with a slight
adjustment for objdump whitespace propagation (arm64 objdump puts spaces
after commas, whereas s390's presumably doesn't).
The mov__scnprintf() declaration is moved from s390's to arm64's
instructions.c because arm64's gets included before s390's.
Committer testing:
Ran 'perf annotate --stdio2 > /tmp/{before,after}' no diff.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20180827150807.304110d2e9919a17c832ca48@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Command 'perf record' calls:
cmd_report()
record__auxtrace_init()
auxtrace_record__init()
On s390 function auxtrace_record__init() returns random return value due
to missing initialization.
This sometime causes 'perf record' to exit immediately without error
message and creating a perf.data file.
Fix this by setting error the return code to zero before returning from
platform specific functions which may not set the error code in call
cases.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180423142940.21143-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the type field in pmu-events/arch/s390/mapfile.cvs more generic to
match the created cpuid string for s390.
The pattern also checks for the counter first version number and counter
second version number ([13]\.[1-5]) and the authorization field which
follows.
These numbers do not exist in the cpuid identification string when perf
commands are executed on a z/VM environment (which does not support CPU
counter measurement facility).
CPUID string for LPAR:
cpuid : IBM,3906,704,M03,3.5,002f
CPUID string for z/VM:
cpuid : IBM,2964,702,N96
This allows the removal of s390 specific cpuid compare code and uses the
common compare function with its regular expression matching algorithm.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180423081745.3672-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
S390 has several load and store instructions with target operand
addressing relative to the program counter, for example lrl, lgrl, strl,
stgrl.
These instructions are handled similar to x86. Objdump output displays
those instructions as:
9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60>
This output is parsed (like on x86) and perf annotate shows those lines
as:
lgrl %r7,mp_+0x60
This patch handles the s390 specific instruction parsing for PC relative
load and store instructions.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf annotate' displays function call assembler instructions with a
right arrow. Hitting enter on this line/instruction causes the browser
to disassemble this target function and show it on the screen. On s390
this results in an error message 'The called function was not found.'
The function call assembly line parsing does not handle the s390 bras
and brasl instructions. Function call__parse expects the target as first
operand:
callq e9140 <__fxstat>
S390 has a register number as first operand:
brasl %r14,41d60 <abort>
Therefore the target addresses on s390 are always zero which is an
invalid address.
Introduce a s390 specific call parsing function which skips the first
operand on s390.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180307134325.96106-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function get_cpuid_str() is called by perf_pmu__getcpuid() and on
s390 returns a complete description of the CPU and its capabilities,
which is a comma separated list.
To map the CPU type with the value defined in the
pmu-events/arch/s390/mapfile.csv, introduce an architecture specific
cpuid compare function named strcmp_cpuid_str()
The currently used regex algorithm is defined as the weak default and
will be used if no platform specific one is defined. This matches the
current behavior.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180213151419.80737-3-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf record ... is setup to record data, the s390 cpu information
was a fixed string "IBM/S390".
Replace this string with one containing more information about the
machine. The information included in the cpuid is a comma separated
list:
manufacturer,type,model-capacity,model[,version,authorization]
with
- manufacturer: up to 16 byte name of the manufacturer (IBM).
- type: a four digit number refering to the machine
generation.
- model-capacitiy: up to 16 characters describing number
of cpus etc.
- model: up to 16 characters describing model.
- version: the CPU-MF counter facility version number,
available on LPARs only, omitted on z/VM guests.
- authorization: the CPU-MF counter facility authorization level,
available on LPARs only, omitted on z/VM guests.
Before:
[root@s8360047 perf]# ./perf record -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ]
[root@s8360047 perf]# ./perf report --header | fgrep cpuid
# cpuid : IBM/S390
[root@s8360047 perf]#
After:
[root@s35lp76 perf]# ./perf report --header|fgrep cpuid
# cpuid : IBM,3906,704,M03,3.5,002f
[root@s35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180213151419.80737-1-tmricht@linux.vnet.ibm.com
[ Use scnprintf instead of strncat to fix build errors on gcc GNU C99 5.4.0 20160609 -march=zEC12 -m64 -mzarch -ggdb3 -O6 -std=gnu99 -fPIC -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Long ago we decided to be verbotten including files in the kernel git
sources from tools/ living source code, to avoid disturbing kernel
development (and perf's and other tools/) when, say, a kernel hacker
adds something, tests everything but tools/ and have tools/ build
broken.
This got broken recently by s/390, fix it by copying
arch/s390/include/uapi/asm/perf_regs.h to tools/arch/s390/include/uapi/asm/,
making this one be used by means of <asm/perf_regs.h> and updating
tools/perf/check_headers.sh to make sure we are notified when the
original changes, so that we can check if anything is needed on the
tooling side.
This would have been caught by the 'tarkpg' test entry in:
$ make -C tools/perf build-test
When run on a s/390 build system or container.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: f704ef4460 ("s390/perf: add support for perf_regs and libdw")
Link: https://lkml.kernel.org/n/tip-n57139ic0v9uffx8wdqi3d8a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The regs_query_register_offset() helper function converts
register name like "%r0" to an offset of a register in user_pt_regs
It is required by the BPF prologue generator.
The user_pt_regs structure was recently added to "asm/ptrace.h".
Hence, update tools/perf/check-headers.sh to keep the header file
in sync with kernel changes.
Suggested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch fixes a bug introduced with commit d9f8dfa9ba ("perf
annotate s390: Implement jump types for perf annotate").
'perf annotate' displays annotated assembler output by reading output of
command objdump and parsing the disassembled lines. For each shown
mnemonic this function sequence is executed:
disasm_line__new()
|
+--> disasm_line__init_ins()
|
+--> ins__find()
|
+--> arch->associate_instruction_ops()
The s390x specific function assigned to function pointer
associate_instruction_ops refers to function s390__associate_ins_ops().
This function checks for supported mnemonics and assigns a NULL pointer
to unsupported mnemonics. However even the NULL pointer is added to the
architecture dependend instruction array.
This leads to an extremely large architecture instruction array
(due to array resize logic in function arch__grow_instructions()).
Depending on the objdump output being parsed the array can end up
with several ten-thousand elements.
This patch checks if a mnemonic is supported and only adds supported
ones into the architecture instruction array. The array does not contain
elements with NULL pointers anymore.
Before the patch (With some debug printf output):
[root@s35lp76 perf]# time ./perf annotate --stdio > /tmp/xxxbb
real 8m49.679s
user 7m13.008s
sys 0m1.649s
[root@s35lp76 perf]# fgrep '__ins__find sorted:1 nr_instructions:'
/tmp/xxxbb | tail -1
__ins__find sorted:1 nr_instructions:87433 ins:0x341583c0
[root@s35lp76 perf]#
The number of different s390x branch/jump/call/return instructions
entered into the array is 87433.
After the patch (With some printf debug output:)
[root@s35lp76 perf]# time ./perf annotate --stdio > /tmp/xxxaa
real 1m24.553s
user 0m0.587s
sys 0m1.530s
[root@s35lp76 perf]# fgrep '__ins__find sorted:1 nr_instructions:'
/tmp/xxxaa | tail -1
__ins__find sorted:1 nr_instructions:56 ins:0x3f406570
[root@s35lp76 perf]#
The number of different s390x branch/jump/call/return instructions
entered into the array is 56 which is sensible.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20171124094637.55558-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For correct unwinding of user space processes, the floating-point
register contents are required. For example, leaf functions might
use fp registers to temporarily store the return address.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With support for perf_regs and libdw, you can record and report
call graphs for user space programs. Simply invoke perf with
the --call-graph=dwarf command line option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[brueckner: added dwfl_thread_state_register_pc() call]
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Perf tool need implement a callback to enable using AUX buffer. Perf
will do another mmap() to trigger the setup of AUX buffer in kernel
if there is such callback. The default size of the AUX buffer is set
properly according to the sampling frequency to avoid overflow. It
could also be manually set by -m option of perf.
The interface of perf is not changed. Diagnostic mode sampling
could be started by `perf record -e rBD000` like before.
Signed-off-by: Pu Hou <bjhoupu@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Kim Phillips
Thomas Richter
Arnaldo Carvalho de Melo
Thomas Richter
Hendrik Brueckner
Ingo Molnar
Heiko Carstens
Pu Hou