Clang warns when multiple pairs of parentheses are used for a single
conditional statement.
drivers/staging/rtlwifi/phydm/phydm_adc_sampling.c:558:33: warning:
equality comparison with extraneous parentheses [-Wparentheses-equality]
} else if ((is_enable_la_mode == 1)) {
~~~~~~~~~~~~~~~~~~^~~~
drivers/staging/rtlwifi/phydm/phydm_adc_sampling.c:558:33: note: remove
extraneous parentheses around the comparison to silence this warning
} else if ((is_enable_la_mode == 1)) {
~ ^ ~
drivers/staging/rtlwifi/phydm/phydm_adc_sampling.c:558:33: note: use '='
to turn this equality comparison into an assignment
} else if ((is_enable_la_mode == 1)) {
^~
=
1 warning generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/172
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following:
bool efuse_re_pg_sec1flag;
u8 efuse_re_pg_data[8];
are not referenced anywhere in the rtlwifi code.
Signed-off-by: Rick Veens <rickveens92@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the ENOMEM constant instead of -1 for kzalloc failure checks in
rtl_halmac.c
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c: In function 'halbtc_leave_lps':
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:284:21: warning:
variable 'ppsc' set but not used [-Wunused-but-set-variable]
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c: In function 'halbtc_enter_lps':
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:307:21: warning:
variable 'ppsc' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang warns when one enumerated type is implicitly converted to another.
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1264:34: warning:
implicit conversion from enumeration type 'enum btc_chip_interface' to
different enumeration type 'enum wifionly_chip_interface'
[-Wenum-conversion]
wifionly_cfg->chip_interface = BTC_INTF_PCI;
~ ^~~~~~~~~~~~
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1267:34: warning:
implicit conversion from enumeration type 'enum btc_chip_interface' to
different enumeration type 'enum wifionly_chip_interface'
[-Wenum-conversion]
wifionly_cfg->chip_interface = BTC_INTF_USB;
~ ^~~~~~~~~~~~
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1270:34: warning:
implicit conversion from enumeration type 'enum btc_chip_interface' to
different enumeration type 'enum wifionly_chip_interface'
[-Wenum-conversion]
wifionly_cfg->chip_interface = BTC_INTF_UNKNOWN;
~ ^~~~~~~~~~~~~~~~
3 warnings generated.
Use the values from the correct enumerated type, wifionly_chip_interface.
BTC_INTF_UNKNOWN = WIFIONLY_INTF_UNKNOWN = 0
BTC_INTF_PCI = WIFIONLY_INTF_PCI = 1
BTC_INTF_USB = WIFIONLY_INTF_USB = 2
Link: https://github.com/ClangBuiltLinux/linux/issues/171
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member regd of the struct rtl_priv is true in a boolean context.
drivers/staging/rtlwifi/regd.c:413:27: warning: address of 'rtlpriv->regd' will always
evaluate to 'true' [-Wpointer-bool-conversion]
if (!wiphy || !&rtlpriv->regd)
~ ~~~~~~~~~^~~~
1 warning generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/170
Signed-off-by: Karthik Nishanth <nishanthkarthik@live.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull staging and IIO updates from Greg KH:
"Here are the big staging/iio patches for 4.19-rc1.
Lots of churn here, with tons of cleanups happening in staging
drivers, a removal of an old crypto driver that no one was using
(skein), and the addition of some new IIO drivers. Also added was a
"gasket" driver from Google that needs loads of work and the erofs
filesystem.
Even with adding all of the new drivers and a new filesystem, we are
only adding about 1000 lines overall to the kernel linecount, which
shows just how much cleanup happened, and how big the unused crypto
driver was.
All of these have been in the linux-next tree for a while now with no
reported issues"
* tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits)
staging:rtl8192u: Remove unused macro definitions - Style
staging:rtl8192u: Add spaces around '+' operator - Style
staging:rtl8192u: Remove stale comment - Style
staging: rtl8188eu: remove unused mp_custom_oid.h
staging: fbtft: Add spaces around / - Style
staging: fbtft: Erases some repetitive usage of function name - Style
staging: fbtft: Adjust some empty-line problems - Style
staging: fbtft: Removes one nesting level to help readability - Style
staging: fbtft: Changes gamma table to define.
staging: fbtft: A bit more information on dev_err.
staging: fbtft: Fixes some alignment issues - Style
staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style
staging: rtl8188eu: remove unused array dB_Invert_Table
staging: rtl8188eu: remove whitespace, add missing blank line
staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c
staging: rtl8188eu: remove whitespace - style
staging: rtl8188eu: cleanup block comment - style
staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c
staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c
staging: rtlwifi: refactor rtl_get_tcb_desc
...
Refactored rtl_get_tcb_desc slightly to stay within the 80 character
line limit.
Signed-off-by: Luke Triantafyllidis <ltriant@cpan.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the "Lines should not end with a '('" warning reported by
checkpatch.pl script. The line containing 'rtl_mrate_idx_to_arfr_id' function
previously ended with '(', which did not conform to the linux kernel
coding style.
Signed-off-by: Sohil Ladhani <supertakumi86@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
halmac_pcie_reg.h is empty, so remove it and the only include of it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RTL8822be can't bring up properly on ASUS X530UN, and dmesg says:
[ 8.591333] r8822be: module is from the staging directory, the quality
is unknown, you have been warned.
[ 8.593122] r8822be 0000:02:00.0: enabling device (0000 -> 0003)
[ 8.669163] r8822be: Using firmware rtlwifi/rtl8822befw.bin
[ 9.289939] r8822be: rtlwifi: wireless switch is on
[ 10.056426] r8822be 0000:02:00.0 wlp2s0: renamed from wlan0
...
[ 11.952534] r8822be: halmac_init_hal failed
[ 11.955933] r8822be: halmac_init_hal failed
[ 11.956227] r8822be: halmac_init_hal failed
[ 22.007942] r8822be: halmac_init_hal failed
Jian-Hong reported it works if turn off ASPM with module parameter aspm=0.
In order to fix this problem kindly, this commit don't turn off aspm but
enlarge ASPM L1 latency to 7.
Reported-by: Jian-Hong Pan <jian-hong@endlessm.com>
Tested-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Small merge conflict in net/mac80211/scan.c, I preserved
the kcalloc() conversion. -DaveM
Johannes Berg says:
====================
This round's updates:
* finally some of the promised HE code, but it turns
out to be small - but everything kept changing, so
one part I did in the driver was >30 patches for
what was ultimately <200 lines of code ... similar
here for this code.
* improved scan privacy support - can now specify scan
flags for randomizing the sequence number as well as
reducing the probe request element content
* rfkill cleanups
* a timekeeping cleanup from Arnd
* various other cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver may sleep with holding a spinlock.
The function call path (from bottom to top) in Linux-4.16.7 is:
[FUNC] schedule
drivers/staging/rtlwifi/halmac/rtl_halmac.c, 884:
schedule in _is_fw_read_cmd_down
drivers/staging/rtlwifi/halmac/rtl_halmac.c, 912:
_is_fw_read_cmd_down in rtl_halmac_send_h2c
drivers/staging/rtlwifi/halmac/rtl_halmac.c, 907:
_raw_spin_lock_irqsave in rtl_halmac_send_h2c
To fix this bug, schedule() is replaced with mdelay(1).
This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bump the IEEE80211_MAX_AMPDU_BUF size to 0x100 for HE support
and - for now - use IEEE80211_MAX_AMPDU_BUF_HT everywhere.
This is derived from my internal patch, parts of which Luca
had sent upstream.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
single_open() returns -ENOMEM when malloc failed, so the caller function
rtl_debugfs_open_rw() should not always return 0. In addition, when using
single_open(), we should use single_release() instead of seq_release() in
the file_operations structure to avoid a memory leak.
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King
Nathan Chancellor
Rick Veens
Aymen Qader
YueHaibing
Karthik Nishanth
Tom Todd
Linus Torvalds
Luke Triantafyllidis
Sohil Ladhani
David S. Miller
Greg Kroah-Hartman
Bjorn Helgaas
Ping-Ke Shih
Jia-Ju Bai
Johannes Berg
Sabin Mihai Rapan
Kees Cook
Tiezhu Yang