Commit Graph
3725 Commits
Author SHA1 Message Date
Mika Westerberg e50d95e2ad pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant
It turns out the HOSTSW_OWN register offset is different between LP and
H variants. The latter should use 0xc0 instead so fix that.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199911
Fixes: a663ccf0fe ("pinctrl: intel: Add Intel Cannon Lake PCH-H pin controller support")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25 12:48:15 +02:00
Andy Shevchenko e99542fb8d pinctrl: intel: merrifield: Group IO accessors in code
Consolidate IO accessors in the code to make maintenance a little bit easier
in the future.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25 12:45:47 +02:00
Andy Shevchenko 5e0b7e7cd2 pinctrl: intel: merrifield: Introduce mrfld_read_bufcfg()
mrfld_read_bufcfg() helper checks if pin is correct and reads back
the current value of corresponding BUFCFG register.

While it adds lines of code it will be easier to maintain in the future.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25 12:44:41 +02:00
Daniel Kurtz b85bfa246e pinctrl/amd: poll InterruptEnable bits in amd_gpio_irq_set_type
From the AMD BKDG, if WAKE_INT_MASTER_REG.MaskStsEn is set, a software
write to the debounce registers of *any* gpio will block wake/interrupt
status generation for *all* gpios for a length of time that depends on
WAKE_INT_MASTER_REG.MaskStsLength[11:0].  During this period the Interrupt
Delivery bit (INTERRUPT_ENABLE) will read as 0.

In commit 4c1de0414a ("pinctrl/amd: poll InterruptEnable bits in
enable_irq") we tried to fix this same "gpio Interrupts are blocked
immediately after writing debounce registers" problem, but incorrectly
assumed it only affected the gpio whose debounce was being configured
and not ALL gpios.

To solve this for all gpios, we move the polling loop from
amd_gpio_irq_enable() to amd_gpio_irq_set_type(), while holding the gpio
spinlock.  This ensures that another gpio operation (e.g.
amd_gpio_irq_unmask()) can read a temporarily disabled IRQ and
incorrectly disable it while trying to modify some other register bits.

Fixes: 4c1de0414a pinctrl/amd: poll InterruptEnable bits in enable_irq
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25 12:39:19 +02:00
YueHaibing a4925311a5 pinctrl: sunxi: fix 'pctrl->functions' allocation in sunxi_pinctrl_build_state
fixes following Smatch static check warning:

 ./drivers/pinctrl/sunxi/pinctrl-sunxi.c:1112 sunxi_pinctrl_build_state()
 warn: passing devm_ allocated variable to kfree. 'pctrl->functions'

As we will be calling krealloc() on pointer 'pctrl->functions', which means
kfree() will be called in there, devm_kzalloc() shouldn't be used with
the allocation in the first place.  Fix the warning by calling kcalloc()
and managing the free procedure in error path on our own.

Fixes: 0e37f88d9a ("ARM: sunxi: Add pinctrl driver for Allwinner SoCs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 09:17:27 -07:00
Mars Cheng bb8d8466ca pinctrl: mediatek: add eint support to MT6765 pinctrl driver
Just add eint support to MT6765 pinctrl driver as usual as
happens on the other SoCs.

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 09:13:54 -07:00
ZH Chen 477fecee7c pinctrl: mediatek: add MT6765 pinctrl driver
Add MT6765 pinctrl driver based on MediaTek pinctrl-paris core.

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: ZH Chen <zh.chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 09:12:55 -07:00
Mars Cheng ecfcfb4988 pinctrl: mediatek: add no eint function for pin define
Add NO_EINT_SUPPORT back to pinctrl-mtk-common-v2.h as the alias of
EINT_NA to indicate that some pin not capable of being controlled as eint
and that is required by pinctrl-paris based driver as old
pinctrl-mtk-common.h already had.

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 09:12:06 -07:00
Sean Wang 7f2e29e133 pinctrl: mediatek: fix static checker warning caused by EINT_NA
EINT_NA is an u16 number, so it should be U16_MAX instead of -1
to fix up drivers/pinctrl/mediatek/pinctrl-paris.c:732 mtk_gpio_to_irq()
warn: impossible condition (desc->eint.eint_n == -1) => (0-u16max == (-1))

Also happens in
drivers/pinctrl/mediatek/pinctrl-paris.c:749 mtk_gpio_set_config()
warn: impossible condition (desc->eint.eint_n == -1) => (0-u16max == (-1))

drivers/pinctrl/mediatek/pinctrl-moore.c:479 mtk_gpio_to_irq()
warn: impossible condition (desc->eint.eint_n == -1) => (0-u16max == (-1))

drivers/pinctrl/mediatek/pinctrl-moore.c:496 mtk_gpio_set_config()
warn: impossible condition '(desc->eint.eint_n == -1) => (0-u16max == (-1))

Fixes: 6561859b06 ("pinctrl: mediatek: add eint support to MT8183 pinctrl driver")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 09:11:12 -07:00
Wei Yongjun 068cfb9a0f pinctrl: mediatek: moore: fix return value check in mtk_moore_pinctrl_probe()
In case of error, the function devm_kmalloc_array() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Fixes: b7d7f9eeca ("pinctrl: mediatek: extend struct mtk_pin_desc which per-pin driver depends on")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 09:08:18 -07:00
Wei Yongjun 07c6b037c2 pinctrl: mediatek: make symbol 'mtk_drive' static
Fixes the following sparse warning:

drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:37:29: warning:
 symbol 'mtk_drive' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 09:02:37 -07:00
Wei Yongjun 184744e9a0 pinctrl: mediatek: paris: fix return value check in mtk_paris_pinctrl_probe()
In case of error, the function devm_kmalloc_array() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Fixes: 805250982b ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 09:00:51 -07:00
YueHaibing 69f8455f6c pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux
'ret' should be returned while pmic_mpp_write_mode_ctl fails.

Fixes: 0e948042c4 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 08:17:43 -07:00
Fabio Estevam c98b0d2db7 pinctrl: mxs: do not export mxs_pinctrl_probe
No user of mxs_pinctrl_probe() can be built as a module, hence
exporting the symbol is not necessary. Drop EXPORT_SYMBOL_GPL.

Inspired by a patch from Stefan Agner for the tegra pinctrl driver.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20 15:45:14 -07:00
Mika Westerberg 96147db1e1 pinctrl: intel: Do pin translation in other GPIO operations as well
For some reason I thought GPIOLIB handles translation from GPIO ranges
to pinctrl pins but it turns out not to be the case. This means that
when GPIOs operations are performed for a pin controller having a custom
GPIO base such as Cannon Lake and Ice Lake incorrect pin number gets
used internally.

Fix this in the same way we did for lock/unlock IRQ operations and
translate the GPIO number to pin before using it.

Fixes: a60eac3239 ("pinctrl: intel: Allow custom GPIO base for pad groups")
Reported-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20 08:21:52 -07:00
Stefan Agner a65fbff275 pinctrl: tegra: do not export tegra_pinctrl_probe
No user of tegra_pinctrl_probe can be built as a module, hence
exporting the symbol is not necessary. Drop EXPORT_SYMBOL_GPL.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20 08:15:16 -07:00
Fabrizio Castro 8faa0754ec pinctrl: sh-pfc: r8a77470: Add USB pin groups
Add USB[01] pin groups and functions to the R8A77470 SoC.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-20 17:11:25 +02:00
Fabrizio Castro df9c71694f pinctrl: sh-pfc: r8a77470: Add SDHI2 pin groups
Add SDHI2 pin groups and functions to the R8A77470 SoC.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-20 17:11:25 +02:00
Fabrizio Castro e5984d0576 pinctrl: sh-pfc: r8a77470: Add QSPI0 pin groups
Add QSPI0 pin groups and function to the R8A77470 SoC.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-20 17:11:25 +02:00
Fabrizio Castro 469c1e97dc pinctrl: sh-pfc: r8a77470: Add DU0 pin groups
Add DU0 pin groups and function to the R8A77470 SoC.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-20 17:11:25 +02:00
Fabrizio Castro e34ebe5a6b pinctrl: sh-pfc: r8a77470: Add I2C4 pin groups
Add I2C4 pin groups and function to the R8A77470 SoC.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-20 17:11:25 +02:00
Fabrizio Castro 9f2b76a2db pinctrl: sh-pfc: r8a77990: Add R8A774C0 PFC support
Renesas RZ/G2E (a.k.a. r8a774c0) is pin compatible with R-Car
E3 (a.k.a. r8a77990), however it doesn't have several automotive
specific peripherals. Add a r8a77990 specific pin groups/functions
along with common pin groups/functions for supporting both r8a77990
and r8a774c0 SoCs.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19 17:29:00 +02:00
Biju Das d7097b97e9 pinctrl: sh-pfc: r8a7791: Add r8a7744 support
Renesas RZ/G1N (R8A7744) is pin compatible with R-Car M2-W/N (R8A7791/3)
and RZ/G1M.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19 17:27:18 +02:00
Linus Walleij 22d7fe4984 pinctrl: mtk: Fix up GPIO includes
Include only <linux/gpio/driver.h> since this is a driver,
not a consumer.

Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 16:38:27 -07:00
Andy Shevchenko 994f886568 pinctrl: cherryview: Remove linux/init.h and sort headers
There is no need to include linux/init.h when at the same time
we include linux/module.h.

Remove redundant inclusion.

While here, sort header block alphabetically for easy maintenance.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 16:37:19 -07:00