Implementing job_abort() does not make sense on some drivers.
This is not a problem, as the abort is not required to
wait for the job to finish. Quite the opposite, drivers
are encouraged not to wait.
Demote v4l2_m2m_ops.job_abort from required to optional, and
clean all drivers with dummy implementations.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Building this driver on arm64 gives this warning:
drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:430:16: error: return expression in void function
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
s5p_jpeg_runtime_resume() does not call clk_disable_unprepare()
for jpeg->clocks[0] when one of the clk_prepare_enable() fails.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
On exynos5433 variant JPEG data is parsed by hardware only from SOS
marker, so subsampling is parsed by software. As such, its value need
not to be translated from hardware-specific encoding to V4L2 encoding.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The value to be processed must be first masked and then shifted,
not the other way round.
Fixes: 6c96dbbc2a ("[media] s5p-jpeg: add support for 5433")
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bits EXYNOS4_DEC_MODE and EXYNOS4_ENC_MODE do not get cleared
on software reset. These bits need to be cleared explicitly.
Even though the bits in question are already cleared in interrupt
service routine, the reset should also clear them in case when
e.g. bootloader uses the codec and leaves it in a bad state.
[Updated commit message]
Signed-off-by: Tony K Nadackal <tony.kn@samsung.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Clearing the bits turns off the encoder/decoder. If the hardware
is not turned off after use, at subsequent uses it does not work
in a stable manner, resulting in incorrect interrupt status value
being read and e.g. erroneous read of compressed bitstream size.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Originally the "size" member was modified in a local variable passed to
s5p_jpeg_parse_hdr() but the member was not used by the caller, so it did
not matter. After applying patch
"media: s5p-jpeg: Don't use temporary structure in s5p_jpeg_buf_queue"
the unnecessary assignment started overwriting already assigned "size"
member of the passed structure with an incorrect value.
Fixes: 14a2de14dc ("media: s5p-jpeg: Don't use temporary structure in s5p_jpeg_buf_queue")
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
On Exynos5420, the STREAM_STAT bit raised on the JPGINTST register means
there is a syntax error or an unrecoverable error on compressed file
when ERR_INT_EN is set to 1.
Fix this case and report BUF_STATE_ERROR to videobuf2.
Signed-off-by: Henry-Ruey Hsu <henryhsu@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch adds support for resolution change event to notify clients so
they can prepare correct output buffer. When resolution change happened,
G_FMT for CAPTURE should return old resolution and format before CAPTURE
queues streamoff.
This event is used in the Chromium browser project by the V4L2 JPEG
Decode Accelerator (V4L2JDA) to allocate output buffer.
Signed-off-by: Henry-Ruey Hsu <henryhsu@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch moves the subsampling value decoding read from the JPEG
header into its own function. This new function is called
s5p_jpeg_subsampling_decode() and returns true if it successfully
decodes the subsampling value, false otherwise.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If s5p_jpeg_parse_hdr() fails to parse the JPEG header, the passed
s5p_jpeg_q_data structure is not modified so there is no need to use a
temporary structure and the field-by-field copy can be avoided.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When queuing an OUTPUT buffer for decoder, s5p_jpeg_parse_hdr()
function parses the input jpeg file and takes the width and height
parameters from its header. These new width/height values will be used
for the calculation of stride. HX_JPEG Hardware needs the width and
height values aligned on a 16 bits boundary. This width/height alignment
is handled in the s5p_jpeg_s_fmt_vid_cap() function during the S_FMT
ioctl call.
But if user space calls the QBUF of OUTPUT buffer after the S_FMT of
CAPTURE buffer, these aligned values will be replaced by the values in
jpeg header. If the width/height values of jpeg are not aligned, the
decoder output will be corrupted. So in this patch we call
jpeg_bound_align_image() to align the width/height values of Capture
buffer in s5p_jpeg_buf_queue().
Signed-off-by: Tony K Nadackal <tony.kn@samsung.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
v4l2_m2m_job_finish(), which is called from the interrupt handler with
slock acquired, can call the device_run() hook immediately if another
context was in the queue. This hook also acquires slock, resulting in
a deadlock for this scenario.
Fix this by releasing slock right before calling v4l2_m2m_job_finish().
This is safe to do as the state of the hardware cannot change before
v4l2_m2m_job_finish() is called anyway.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Gcc 7.1 complains about:
drivers/media/platform/s5p-jpeg/jpeg-core.c: In function 's5p_jpeg_parse_hdr.isra.9':
drivers/media/platform/s5p-jpeg/jpeg-core.c:1207:12: warning: 'width' may be used uninitialized in this function [-Wmaybe-uninitialized]
result->w = width;
~~~~~~~~~~^~~~~~~
drivers/media/platform/s5p-jpeg/jpeg-core.c:1208:12: warning: 'height' may be used uninitialized in this function [-Wmaybe-uninitialized]
result->h = height;
~~~~~~~~~~^~~~~~~~
Indeed the code would allow it to return a random value (although
it shouldn't happen, in practice). So, explicitly set both to zero,
just in case.
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use generic helpers instead of open-coding usage of runtime PM for system
sleep PM, which was potentially broken for some corner cases.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for vb2_ops structures that are only stored in the ops field of a
vb2_queue structure. That field is declared const, so vb2_ops structures
that have this property can be declared as const also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct vb2_ops i@p = { ... };
@ok@
identifier r.i;
struct vb2_queue e;
position p;
@@
e.ops = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct vb2_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct vb2_ops i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
[hans.verkuil@cisco.com: dropped soc_camera/rcar_vin.c patch because that driver will be removed]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Mauro Carvalho Chehab
Ezequiel Garcia
Mauro Carvalho Chehab
Flavio Ceolin
Andrzej Pietrasiewicz
Tony K Nadackal
henryhsu
Thierry Escande
Alexandre Courbot
Masahiro Yamada
Marek Szyprowski
Julia Lawall
Shuah Khan