In randconfig builds without CONFIG_GENERIC_ALLOCATOR, this driver
fails to link:
ERROR: "gen_pool_alloc_algo" [drivers/fsi/fsi-master-ast-cf.ko] undefined!
ERROR: "gen_pool_fixed_alloc" [drivers/fsi/fsi-master-ast-cf.ko] undefined!
ERROR: "of_gen_pool_get" [drivers/fsi/fsi-master-ast-cf.ko] undefined!
ERROR: "gen_pool_free" [drivers/fsi/fsi-master-ast-cf.ko] undefined!
Select the dependency as all other users do.
Fixes: 6a794a27da ("fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.
Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.
Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>
Otherwise cronus putmem fails istep and BML fails to upload skiboot
To do that, we still use our one-page command buffer for small commands
for speed, and for anything bigger, with a limit of 1MB plus a page,
we vmalloc a temporary buffer.
The limit was chosen because Cronus will break up any data transfer
into 1M chunks (the extra page is for the command header).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
The chardev conversion forgot to copy the fsi_dev,
silly mistake, compounded by a testing mistake on
my side, this specific driver wasn't being tested
properly.
Fixes: d8f4587655 "fsi: scom: Convert to use the new chardev"
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The bus scanning process isn't terribly good at parallel attempts
at rescanning the same bus. Let's have a per-master mutex protecting
the scanning process.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This aims to deprecate the "raw" sysfs file used for directly
accessing the CFAM and instead use a char device like the
other sub drivers.
Since it reworks the slave creation code and adds a cfam device
type, we also use the opportunity to convert the attributes
to attribute groups and add a couple more.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This converts FSI scom to use the new fsi-core controlled
chardev allocator and use a real cdev instead of a miscdev.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This converts FSI sbefifo to use the new fsi-core controlled
chardev allocator and use a real cdev instead of a miscdev.
One side effect is to fix the object lifetime by removing
the use of devm_kzalloc() for something that contains kobjects,
and using proper reference counting.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The various FSI devices (sbefifo, occ, scom, more to come)
currently use misc devices.
This is problematic as the minor device space for misc is
limited and there can be a lot of them. Also it limits our
ability to move them to a dedicated /dev/fsi directory or
to be smart about device naming and numbering.
It also means we have IDAs on every single of these drivers
This creates a common fsi "device_type" for the optional
/dev/fsi grouping and a dev_t allocator for all FSI devices.
"Legacy" devices get to use a backward compatible numbering
scheme (as long as chip id <16 and there's only one copy
of a given unit type per chip).
A single major number and a single IDA are shared for all
FSI devices.
This doesn't convert the FSI device drivers to use the new
scheme yet, they will be converted individually.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
s390 defines a global dump_trace() symbol. Rename ours to
dump_ucode_trace() to avoid a collision in build tests.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
In case memory resources for *fw* were allocated, release them
before return.
Addresses-Coverity-ID: 1472044 ("Resource leak")
Fixes: 6a794a27da ("fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Then reading the RTAG/RCRC "registers" from the coprocessor after
a command is complete, mask out the top bits, only keep the relevant
bits. Microcode v5 will leave garbage in those top bits as a
result of a performance optimization.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
Some of the exit path missed the unlock. Move the mutex to
an outer function to avoid the problem completely
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The Aspeed AST2x00 can contain a ColdFire v1 coprocessor which
is currently unused on OpenPower systems.
This adds an alternative to the fsi-master-gpio driver that
uses that coprocessor instead of bit banging from the ARM
core itself. The end result is about 4 times faster.
The firmware for the coprocessor and its source code can be
found at https://github.com/ozbenh/cf-fsi and is system specific.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This moves the definitions for various protocol details
(message & response codes, delays etc...) out of
fsi-master-gpio.c to fsi-master.h in order to share them
with other master implementations.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
The embedded struct device needs a release function to be
able to successfully remove the driver.
We remove the devm_gpiod_put() as they are unnecessary
(the resources will be released automatically) and because
fsi_master_unregister() will cause the master structure to
be freed.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
In the error path of fsi_master_register(), we currently
use device_unregister(). This will cause the last reference
to the structure to be dropped, thus freeing the enclosing
structure, which isn't what the callers want.
Use device_del() instead so that we return to the caller
with a refcount of 1. The caller can then assume that it
must use put_device() after a call to fsi_master_register()
regardless of whether the latter suceeded or failed.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Some definitions are generic to the FSI protocol or any
give master implementation. Rename them to remove the
"GPIO" prefix in preparation for moving them to a common
header.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
# Conflicts:
# drivers/fsi/fsi-master-gpio.c
This adds a few more tracepoints that have proven useful when
debugging issues with the FSI bus.
This also makes echo_delay() use clock_zeros() instead of
open-code it in order to share the tracepoint.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
What the driver called "FSI_GPIO_PRIME_SLAVE_CLOCKS" is what
the FSI spec calls tSendDelay and should be 16 clocks by
default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
