Added pygments as optional dependency for AQMP TUI.
This is required for the upcoming syntax highlighting feature
in AQMP TUI.
The dependency has also been added in the devel optional group.
Added mypy 'ignore_missing_imports' for pygments since it does
not have any type stubs.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-5-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Add an entry point for aqmp-tui. This will allow it to be run from
the command line using "aqmp-tui localhost:1234"
More options available in the TUI can be found using "aqmp-tui -h"
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-4-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Added AQMP TUI.
Implements the follwing basic features:
1) Command transmission/reception.
2) Shows events asynchronously.
3) Shows server status in the bottom status bar.
4) Automatic retries on disconnects and error conditions.
Also added type annotations and necessary pylint/mypy configurations.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-3-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Added dependencies for the upcoming AQMP TUI under the optional
'tui' group.
The same dependencies have also been added under the devel group
since no work around has been found for optional groups to imply
other optional groups.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-2-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
I'm not exposing this via the Makefile help, it's not likely to be
useful to passersby. Switch the avocado runner to the 'legacy' runner
for now, as the new runner seems to obscure coverage reports, again.
Usage is to enter your venv of choice and then:
`make check-coverage && xdg-open htmlcov/index.html`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-28-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Avocado v90 includes improved support for running async unit tests. The
workaround that existed prior to v90 causes the unit tests to fail
afterwards, however, so upgrade our minimum version pin to the very
latest and greatest.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-25-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
mypy handles this better -- but we only need the workaround because
pylint under Python 3.6 does not understand that a MutableMapping really
does have a .get() method attached.
We could remove this again once 3.7 is our minimum.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
too-many-function-args seems prone to failure when considering
things like Method Resolution Order, which mypy gets correct. When
dealing with multiple inheritance, pylint doesn't seem to understand
which method will actually get called, while mypy does.
Remove the less powerful, redundant check.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A few new annoyances. Of note is the new warning for an unspecified
encoding when opening a text file, which actually does indicate a
potentially real problem; see
https://www.python.org/dev/peps/pep-0597/#motivation
Use LC_CTYPE to determine an encoding to use for interpreting QEMU's
terminal output. Note that Python states: "language code and encoding
may be None if their values cannot be determined" -- use a platform
default as a backup.
Notes: Passing encoding=None will generate a suppressed warning on
Python 3.10+ that 'None' should not be passed as the encoding
argument. This behavior may be deprecated in the future and the default
switched to be a ubiquitous UTF-8. Opting in to the locale default will
be done by passing the encoding 'locale', but that isn't available in
3.6 through 3.9. Presumably this warning will be unsuppressed some time
prior to the actual switch and we can re-investigate these issues at
that time if necessary.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210916182248.721529-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Pylint prior to 2.8.3 (We pin at >= 2.8.0) includes function and method
signatures as part of its duplicate checking algorithm. This check does
not listen to pragmas, so the only way to disable it is to turn it off
completely or increase the minimum duplicate lines so that it doesn't
trigger for functions with long, multi-line signatures.
When we decide to upgrade to pylint 2.8.3 or greater, we will be able to
use 'ignore-signatures = true' to the config instead.
I'd prefer not to keep us on the very bleeding edge of pylint if I can
help it -- 2.8.3 came out only three days ago at time of writing.
See: https://github.com/PyCQA/pylint/pull/4474
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210809090114.64834-3-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Currently tox tests against the installed interpreters, however if any
supported interpreter is absent then it will return fail. It seems not
reasonable to expect developers to have all supported interpreters
installed on their systems. Luckily tox can be configured to skip
missing interpreters.
This changed the tox setup so that missing interpreters are skipped by
default. On the CI, however, we still want to enforce it tests
against all supported. This way on CI the
--skip-missing-interpreters=false option is passed to tox.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210630184546.456582-1-wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
tox is already testing the most recent versions. Let's use pipenv to
test the oldest versions we claim to support. This matches the stylistic
choice to have pipenv always test our oldest supported Python version, 3.6.
The effect of this is that the python-check-pipenv CI job on gitlab will
now test against much older versions of these linters, which will help
highlight incompatible changes that might otherwise go unnoticed.
Update instructions for adding and bumping versions in setup.cfg. The
reason for deleting the line that gets added to Pipfile is largely just
to avoid having the version minimums specified in multiple places in
config checked into the tree.
(This patch was written by deleting Pipfile and Pipfile.lock, then
explicitly installing each dependency manually at a specific
version. Then, I restored the prior Pipfile and re-ran `pipenv lock
--dev --keep-outdated` to re-add the qemu dependency back to the pipenv
environment while keeping the "old" packages. It's annoying, yes, but I
think the improvement to test coverage is worthwhile.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These suppressions only apply to a small handful of places. Instead of
disabling them globally, disable them just in the cases where we
need. The design of the machine class grew quite organically with tons
of constructor and class instance variables -- there's little chance of
meaningfully refactoring it in the near term, so just suppress the
warnings for that class.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
https://www.python.org/dev/peps/pep-0561/#specification
Create 'py.typed' files in each subpackage that indicate to mypy that
this is a typed module, so that users of any of these packages can use
mypy to check their code as well.
Note: Theoretically it's possible to ditch MANIFEST.in in favor of using
package_data in setup.cfg, but I genuinely could not figure out how to
get it to include things from the *source root* into the *package root*;
only how to include things from each subpackage. I tried!
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Remove the shebang, and add a package-defined entry point instead. Now,
it can be accessed using 'qemu-ga-client' from the command line after
installing the package.
The next commit adds a forwarder shim that allows the running of this
script without needing to install the package again.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In preparation for moving qom-fuse over to the python package, we need
some new dependencies to support it.
Add an optional 'fusepy' dependency that users of the package can opt
into with e.g. "pip install qemu[fuse]" which installs the requirements
necessary to obtain the additional functionality.
Add the same fusepy dependency to the 'devel' extras group --
unfortunately I do not see a way for optional groups to imply other
optional groups at present, so the dependency is repeated. The
development group needs to include the full set of dependencies for the
purpose of static analysis of all features offered by this library.
Lastly, add the [fuse] extras group to tox's configuration as a
workaround so that if a stale tox environment is found when running
`make check-tox`, tox will know to rebuild its environments.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Because fusepy does not have type hints, add some targeted warning
suppressions.
Namely, we need to allow subclassing something of an unknown type (in
qom_fuse.py), and we need to allow missing imports (recorded against
fuse itself) because mypy will be unable to import fusepy (even when
installed) as it has no types nor type stubs available.
Note: Until now, it was possible to run invocations like 'mypy qemu/'
from ./python and have that work. However, these targeted suppressions
require that you run 'mypy -p qemu/' instead. The correct, canonical
invocation is recorded in ./python/tests/mypy.sh and all of the various
CI invocations always use this correct form.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
fd and fh are fine: we often use these for "file descriptor" or "file
handle" accordingly. It is rarely the case that you need to enforce a
more semantically meaningful name beyond "This is the file we are using
right now."
While we're here: add comments for all of the non-standard pylint
names. (And the underscore.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
G S Niteesh BabuandJohn Snow
Wainer dos Santos MoschettaandCleber Rosa