It was deprecated in 9.2, time to remove.
Note, that (which become obvious with this commit) we forget to do some
checks for reconnect-ms options, for example, it was silently ignored
for listening server, instead of error-out. The commit fixes this, as
now we use reconnect_ms everywhere.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow limiting the amount of log output sent. Allow up to 1 MiB.
In case the guest log buffer is larger than 1 MiB limit the output
instead of throwing an error.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20251017115006.2696991-4-kraxel@redhat.com>
Starting with the edk2-stable202508 tag OVMF (and ArmVirt too) have
optional support for logging to a memory buffer. There is guest side
support -- for example in linux kernels v6.17+ -- to read that buffer.
But that might not helpful if your guest stops booting early enough that
guest tooling can not be used yet. So host side support to read that
log buffer is a useful thing to have.
This patch implements the query-firmware-log qmp monitor command to
read the firmware log.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20251017115006.2696991-2-kraxel@redhat.com>
The recently-introduced query-mshv command is a duplicate of query-kvm,
and neither provides a full view of which accelerators are supported
by a particular binary of QEMU and which is in use.
KVM was the first accelerator added to QEMU, predating QOM and TYPE_ACCEL,
so it got a pass. But now, instead of adding a badly designed copy, solve
the problem completely for all accelerators with a command that provides
the whole picture:
>> {"execute": "query-accelerators"}
<< {"return": {"enabled": "tcg", "present": ["kvm", "mshv", "qtest", "tcg", "xen"]}}
Cc: Praveen K Paladugu <prapal@microsoft.com>
Cc: Magnus Kulke <magnuskulke@linux.microsoft.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio,pci,pc: features, fixes
users can now control VM bit in smbios.
vhost-user-device is now user-createable.
intel_iommu now supports PRI
virtio-net now supports GSO over UDP tunnel
ghes now supports error injection
amd iommu now supports dma remapping for vfio
better error messages for virtio
small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmji0s0PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpuH4H/09h70IqAWZGHIWKGmmGGtdKOj3g54KuI0Ss
# mGECEsHvvBexOy670Qy8jdgXfaW4UuNui8BiOnJnGsBX8Y0dy+/yZori3KhkXkaY
# D57Ap9agkpHem7Vw0zgNsAF2bzDdlzTiQ6ns5oDnSq8yt82onCb5WGkWTGkPs/jL
# Gf8Jv+Ddcpt5SU4/hHPYC8pUhl7z4xPOOyl0Qp1GG21Pxf5v4sGFcWuGGB7UEPSQ
# MjZeoM0rSnLDtNg18sGwD5RPLQs13TbtgsVwijI79c3w3rcSpPNhGR5OWkdRCIYF
# 8A0Nhq0Yfo0ogTht7yt1QNPf/ktJkuoBuGVirvpDaix2tCBECes=
# =Zvq/
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 05 Oct 2025 01:19:25 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [unknown]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (75 commits)
virtio: improve virtqueue mapping error messages
pci: Fix wrong parameter passing to pci_device_get_iommu_bus_devfn()
intel_iommu: Simplify caching mode check with VFIO device
intel_iommu: Enable Enhanced Set Root Table Pointer Support (ESRTPS)
vdpa-dev: add get_vhost() callback for vhost-vdpa device
amd_iommu: HATDis/HATS=11 support
intel-iommu: Move dma_translation to x86-iommu
amd_iommu: Refactor amdvi_page_walk() to use common code for page walk
amd_iommu: Do not assume passthrough translation when DTE[TV]=0
amd_iommu: Toggle address translation mode on devtab entry invalidation
amd_iommu: Add dma-remap property to AMD vIOMMU device
amd_iommu: Set all address spaces to use passthrough mode on reset
amd_iommu: Toggle memory regions based on address translation mode
amd_iommu: Invalidate address translations on INVALIDATE_IOMMU_ALL
amd_iommu: Add replay callback
amd_iommu: Unmap all address spaces under the AMD IOMMU on reset
amd_iommu: Use iova_tree records to determine large page size on UNMAP
amd_iommu: Sync shadow page tables on page invalidation
amd_iommu: Add basic structure to support IOMMU notifier updates
amd_iommu: Add a page walker to sync shadow page tables on invalidation
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch adds the ability to map a host unix socket to a guest tcp socket when
using the slirp backend. This feature was added in libslirp version 4.7.0.
A new syntax for unix socket: -hostfwd=unix:hostpath-[guestaddr]:guestport
Signed-off-by: Viktor Kurilko <murlockkinght@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-ID: <20250808143904.363907-1-murlockkinght@gmail.com>
Create a QMP command to be used for generic ACPI APEI hardware error
injection (HEST) via GHESv2, and add support for it for ARM guests.
Error injection uses ACPI_HEST_SRC_ID_QMP source ID to be platform
independent. This is mapped at arch virt bindings, depending on the
types supported by QEMU and by the BIOS. So, on ARM, this is supported
via ACPI_GHES_NOTIFY_GPIO notification type.
This patch was co-authored:
- original ghes logic to inject a simple ARM record by Shiju Jose;
- generic logic to handle block addresses by Jonathan Cameron;
- generic GHESv2 error inject by Mauro Carvalho Chehab;
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-authored-by: Shiju Jose <shiju.jose@huawei.com>
Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <81e2118b3c8b7e5da341817f277d61251655e0db.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the cpr-exec migration mode. Usage:
qemu-system-$arch -machine aux-ram-share=on ...
migrate_set_parameter mode cpr-exec
migrate_set_parameter cpr-exec-command \
<arg1> <arg2> ... -incoming <uri-1> \
migrate -d <uri-1>
The migrate command stops the VM, saves state to uri-1,
directly exec's a new version of QEMU on the same host,
replacing the original process while retaining its PID, and
loads state from uri-1. Guest RAM is preserved in place,
albeit with new virtual addresses.
The new QEMU process is started by exec'ing the command
specified by the @cpr-exec-command parameter. The first word of
the command is the binary, and the remaining words are its
arguments. The command may be a direct invocation of new QEMU,
or may be a non-QEMU command that exec's the new QEMU binary.
This mode creates a second migration channel that is not visible
to the user. At the start of migration, old QEMU saves CPR state
to the second channel, and at the end of migration, it tells the
main loop to call cpr_exec. New QEMU loads CPR state early, before
objects are created.
Because old QEMU terminates when new QEMU starts, one cannot
stream data between the two, so uri-1 must be a type,
such as a file, that accepts all data before old QEMU exits.
Otherwise, old QEMU may quietly block writing to the channel.
Memory-backend objects must have the share=on attribute, but
memory-backend-epc is not supported. The VM must be started with
the '-machine aux-ram-share=on' option, which allows anonymous
memory to be transferred in place to the new process. The memfds
are kept open across exec by clearing the close-on-exec flag, their
values are saved in CPR state, and they are mmap'd in new QEMU.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/1759332851-370353-7-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
qemu_rbd_get_specific_info() has at least two problems:
The first is that it issues a blocking rbd_read() call in order to probe
the encryption format for the image while querying the node. This means
that if the connection to the server goes down, not only I/O is stuck
(which is unavoidable), but query-names-block-nodes will actually make
the whole QEMU instance unresponsive. .bdrv_get_specific_info
implementations shouldn't perform blocking operations, but only return
what is already known.
The second is that the information returned isn't even correct. If the
image is already opened with encryption enabled at the RBD level, we'll
probe for "double encryption", i.e. if the encrypted data contains
another encryption header. If it doesn't (which is the normal case), we
won't return the encryption format. If it does, we return misleading
information because it looks like we're talking about the outer level
(the encryption format of the image itself) while the information is
about an encryption header in the guest data.
Fix this by storing the encryption format in BDRVRBDState when the image
is opened (and we do blocking operations anyway) and returning only the
stored information in qemu_rbd_get_specific_info().
The information we'll store is either the actual encryption format that
we enabled on the RBD level, or if the image is unencrypted, the result
of the same probing as we previously did when querying the node. Probing
image formats based on content that can be modified by the guest has
long been known as problematic, but as long as we only output it to the
user instead of making decisions based on it, it should be okay. It is
undoubtedly useful in the context of 'qemu-img info' when you're trying
to figure out which encryption options you have to use to open the
image successfully.
Fixes: 42e4ac9ef5 ("block/rbd: Add support for rbd image encryption")
Buglink: https://issues.redhat.com/browse/RHEL-105440
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250811134010.81787-1-kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The docs generated for qapi/accelerator.json shows text "=
Accelerators" instead of a heading. This is because the patch that
added the heading crossed with the commit that changed heading
markup (commit 6c10778826 "docs/sphinx: remove special parsing for
freeform sections"). Fix the markup.
Fixes: 18da42ee42 (qapi/accel: Move definitions related to accelerators in their own file)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250724091742.1950167-2-armbru@redhat.com>
Using qom-list and qom-get to get all the nodes and property values in
a QOM tree can take multiple seconds because it requires 1000's of
individual QOM requests. Some managers fetch the entire tree or a
large subset of it when starting a new VM, and this cost is a
substantial fraction of start up time.
Define the qom-list-get command, which fetches all the properties and
values for a list of paths. This can be much faster than qom-list
plus qom-get. When getting an entire QOM tree, I measured a 10x
speedup in elapsed time.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <1752248703-217318-2-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
UI-related for 10.1
- [PATCH v3 0/2] ui/vnc: Do not copy z_stream
- [PATCH v6 0/7] ui/spice: Enable gl=on option for non-local or remote clients
- [PATCH v6 0/1] Allow injection of virtio-gpu EDID name
- [PATCH 0/2] ui/gtk: Add keep-aspect-ratio and scale option
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCgA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmh19eYcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5cLsEAC1NV4DFQmb0TjuK/Bb
# 81dDED9DGHsYybVy5x3xSqVkJtAoHTC4FmCm8x9T8wwg+utDvCGFfRM1GeMFR/yI
# IzM+2xs9PcG/+7j/HhVLWr9QhoWV/yoKHcjJScfkTrTtZxAQRA3suUdQT1RjvwUY
# NEuKaOx42dEpV7E+OHp8172eG8CWBzFMjH+cx2b6yKoxF1kVsB7kgVb+kCMYBEQi
# 1YHf34G+HGTev+IzzpxnO+P7p2lJ1ud93kCp1Yz8ua5zOUEPiaHkbClFj4M9mdsn
# xvaxby+zJqe33rh8pVr3qD/4R2j35OW7F5uiAQ8C96KF5Eviia8Cno1s4QInpcw/
# sqtorkaP+OLO6sCnvBQqo99iMH2KloCV7b5sUzfxlUkS+3txD1AKRbodz+vhBqMN
# dbESdd1veUFEvi00DGbxfJbbkzVIhxAwad8CNnSjCdsvJdfYLA7TuSEuBtf1lQPF
# lqpVZFB6C3LQMbmTwT9YrOzMtMXQcT+GFpJLOBk0Cxv4rCSil+TeDpEUNXHurYjI
# qWZT+vyGDqyhoZHyQMPsBwAywKgtMC3IwnkKgJdTHroJ57Am86BvZqELRzh8Tffl
# nkdu1uHdNQXT/u8ybU3mStaQ7xMJALL4tlMuIZ5TIkvMeQm4CiViGb/i5LSn/GMk
# lx2JmBwXXf/imsXeBUfxktJFrw==
# =QQ/7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 15 Jul 2025 02:32:06 EDT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
tpm: "qemu -tpmdev help" should return success
ui/gtk: Add scale option
ui/gtk: Add keep-aspect-ratio option
hw/display: Allow injection of virtio-gpu EDID name
ui/spice: Blit the scanout texture if its memory layout is not linear
ui/spice: Create a new texture with linear layout when gl=on is specified
ui/console-gl: Add a helper to create a texture with linear memory layout
ui/spice: Add an option to submit gl_draw requests at fixed rate
ui/spice: Add an option for users to provide a preferred video codec
ui/spice: Enable gl=on option for non-local or remote clients
ui/egl-helpers: Error check the fds in egl_dmabuf_export_texture()
ui/vnc: Introduce the VncWorker type
ui/vnc: Do not copy z_stream
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
