Provide the following definitions required by the common code:
* ELF_NREG: with the value of sizeof(s390_regs) / sizeof(long).
* target_elf_gregset_t: define it like all the other arches do.
* elf_core_copy_regs(): similar to kernel's s390_regs_get().
* USE_ELF_CORE_DUMP.
* ELF_EXEC_PAGESIZE.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20210413205608.22587-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current code dumps the memory between arg_start and arg_end,
which contains the argv pointers. This results in the
Core was generated by `<garbage>`
message when opening the core file in GDB. This is because the code is
supposed to dump the actual arg strings. Fix by using arg_strings and
env_strings instead of arg_start and arg_end.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20210413205814.22821-1-iii@linux.ibm.com>
[lv: add missing braces]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210505103702.521457-7-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously, guest_loaddr was not taken into account when returning an
address from pgb_find_hole when /proc/self/maps was unavailable which
caused an improper guest_base address to be calculated.
This could cause a SIGSEGV later in load_elf_image -> target_mmap for
ET_EXEC type images since the mmap MAP_FIXED flag is specified which
could clobber existing mappings at the address returnd by g2h().
mmap(0xd87000, 16846912, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE|0x100000, -1, 0) = 0xd87000
munmap(0xd87000, 16846912) = 0
write(2, "Locating guest address space @ 0"..., 40Locating guest address space @ 0xd87000) = 40
mmap(0x1187000, 16850944, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x1187000
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_ACCERR, si_addr=0x2188310} ---
+++ killed by SIGSEGV +++
Now, pgd_find_hole accounts for guest_loaddr in this scenario.
Fixes: ad592e37df ("linux-user: provide fallback pgd_find_hole for bare chroots")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210131061948.15990-1-vfazio@xes-inc.com>
[lv: updated it to check if ret == -1]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously, pgd_find_hole_fallback assumed that if the build host's libc
had MAP_FIXED_NOREPLACE defined that the address returned by mmap would
match the requested address. This is not a safe assumption for Linux
kernels prior to 4.17
Now, we always compare mmap's resultant address with the requested
address and no longer short-circuit based on MAP_FIXED_NOREPLACE.
Fixes: 2667e069e7 ("linux-user: don't use MAP_FIXED in pgd_find_hole_fallback")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210131061930.14554-1-vfazio@xes-inc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously, if the build host's libc did not define MAP_FIXED_NOREPLACE
or if the running kernel didn't support that flag, it was possible for
pgd_find_hole_fallback to munmap an incorrect address which could lead to
SIGSEGV if the range happened to overlap with the mapped address of the
QEMU binary.
mmap(0x1000, 22261224, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7f889d331000
munmap(0x1000, 22261224) = 0
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x84b817} ---
++ killed by SIGSEGV +++
Now, always munmap the address returned by mmap.
Fixes: 2667e069e7 ("linux-user: don't use MAP_FIXED in pgd_find_hole_fallback")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210131061849.12615-1-vfazio@xes-inc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some ELF binaries encode the .bss section as an extension of the data
ones by setting the segment p_memsz > p_filesz. Some other binaries take
a different route and encode it as a stand-alone PT_LOAD segment with
p_filesz = 0 and p_memsz > 0.
Both the encodings are actually correct per ELF specification but the
ELF loader had some troubles in handling the former: with the old logic
it was very likely to get Qemu to crash in zero_bss when trying to
access unmapped memory.
zero_bss isn't meant to allocate whole zero-filled segments but to
"complete" a previously mapped segment with the needed zero bits.
The fix is pretty simple, if the segment is completely zero-filled we
simply allocate one or more pages (according to p_memsz) and avoid
calling zero_bss altogether.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <c9106487-dc4d-120a-bd48-665b3c617287@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Userland ELF binaries using Loongson SIMD instructions have the
HWCAP_LOONGSON_MMI bit set [1].
Binaries compiled for Loongson 3A [2] have the HWCAP_LOONGSON_EXT
bit set for the LQ / SQ instructions.
[1] commit 8e2d5831e4 ("target/mips: Legalize Loongson insn flags")
[2] commit af868995e1 ("target/mips: Add Loongson-3 CPU definition")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214003215.344522-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
ISA features are usually denoted in read-only bits from
CPU registers. Add the GET_FEATURE_REG_EQU() macro which
checks if a CPU register has bits set to a specific value.
Use the macro to check the 'Architecture Revision' level
of the Config0 register, which is '2' when the Release 6
ISA is implemented.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214003215.344522-5-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
ISA features are usually denoted in read-only bits from
CPU registers. Add the GET_FEATURE_REG_SET() macro which
checks if a CPU register has bits set.
Use the macro to check for MSA (which sets the MSAP bit of
the Config3 register when the ASE implementation is present).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214003215.344522-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Coverity points out that we don't check the return value from
copy_from_user() in vma_dump_size(). This is to some extent
a "can't happen" error since we've already checked the page
with an access_ok() call earlier, but it's simple enough to
handle the error anyway.
Fixes: Coverity CID 1432362
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201103141532.19912-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In pgd_find_hole_fallback(), Coverity doesn't like the use
of "if (MAP_FIXED_NOREPLACE || ...)" because it's using a
logical operator on a constant other than 0 or 1 and its
heuristic thinks we might have intended a bitwise operator
instead.
The logic is correct (we are checking whether the host really
has a MAP_FIXED_NOREPLACE or whether we fell back to the
"#define as 0 to ignore" from osdep.h); make Coverity
happier by explicitly writing out the comparison with zero.
Fixes: Coverity CID 1431059
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201103142636.21125-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
