Commit Graph
742 Commits
Author SHA1 Message Date
Marc-André LureauandPaolo Bonzini c26763f8ec memory: learn about non-volatile memory region
Add a new flag to mark memory region that are used as non-volatile, by
NVDIMM for example. That bit is propagated down to the flat view, and
reflected in HMP info mtree with a "nv-" prefix on the memory type.

This way, guest_phys_blocks_region_add() can skip the NV memory
regions for dumps and TCG memory clear in a following patch.

Cc: dgilbert@redhat.com
Cc: imammedo@redhat.com
Cc: pbonzini@redhat.com
Cc: guangrong.xiao@linux.intel.com
Cc: mst@redhat.com
Cc: xiaoguangrong.eric@gmail.com
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181003114454.5662-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-06 21:35:05 +01:00
Richard Henderson ab65110530 cputlb: Remove tlb_c.pending_flushes
This is essentially redundant with tlb_c.dirty.

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31 12:16:39 +00:00
Richard Henderson 3d1523ced6 cputlb: Filter flushes on already clean tlbs
Especially for guests with large numbers of tlbs, like ARM or PPC,
we may well not use all of them in between flush operations.
Remember which tlbs have been used since the last flush, and
avoid any useless flushing.

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31 12:16:35 +00:00
Richard Henderson e09de0a20d cputlb: Count "partial" and "elided" tlb flushes
Our only statistic so far was "full" tlb flushes, where all mmu_idx
are flushed at the same time.

Now count "partial" tlb flushes where sets of mmu_idx are flushed,
but the set is not maximal.  Account one per mmu_idx flushed, as
that is the unit of work performed.

We don't actually count elided flushes yet, but go ahead and change
the interface presented to the monitor all at once.

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31 12:16:30 +00:00
Richard Henderson d5363e5849 cputlb: Move env->vtlb_index to env->tlb_d.vindex
The rest of the tlb victim cache is per-tlb,
the next use index should be as well.

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31 12:16:12 +00:00
Richard Henderson 1308e02671 cputlb: Split large page tracking per mmu_idx
The set of large pages in the kernel is probably not the same
as the set of large pages in the application.  Forcing one
range to cover both will flush more often than necessary.

This allows tlb_flush_page_async_work to flush just the one
mmu_idx implicated, which in turn allows us to remove
tlb_check_page_and_flush_by_mmuidx_async_work.

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31 12:16:08 +00:00
Richard Henderson 60a2ad7d86 cputlb: Move cpu->pending_tlb_flush to env->tlb_c.pending_flush
Protect it with the tlb_lock instead of using atomics.
The move puts it in or near the same cacheline as the lock;
using the lock means we don't need a second atomic operation
in order to perform the update.  Which makes it cheap to also
update pending_flush in tlb_flush_by_mmuidx_async_work.

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31 12:16:02 +00:00
Richard Henderson 53d284554c cputlb: Move tlb_lock to CPUTLBCommon
This is the first of several moves to reduce the size of the
CPU_COMMON_TLB macro and improve some locality of refernce.

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31 12:15:28 +00:00
Peter Maydell a2e002ff79 Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)

v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
    built in a 32bit debian sid chroot

# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
  milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
  ppc: move at24c to its own CONFIG_ symbol
  hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
  hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
  tests/bios-tables-test: Remove an useless cast
  xen: Use the PCI_DEVICE macro
  qobject: Catch another straggler for use of qdict_put_str()
  configure: Support pkg-config for zlib
  tests: Fix typos in comments and help message (found by codespell)
  cpu.h: fix a typo in comment
  linux-user: fix comment s/atomic_write/atomic_set/
  qemu-iotests: make 218 executable
  scripts/qemu.py: remove trailing quotes on docstring
  scripts/decodetree.py: remove unused imports
  docs/devel/testing.rst: add missing newlines after code block
  qemu-iotests: fix filename containing checks
  tests/tcg/README: fix location for lm32 tests
  memory.h: fix typos in comments
  vga_int: remove unused function protype
  configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-30 15:49:55 +00:00
Li QiangandLaurent Vivier 847b31f0d6 memory.h: fix typos in comments
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1539080467-2976-1-git-send-email-liq3ea@gmail.com>
[lv: s/types/typos/]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-26 17:17:32 +02:00
Aleksandar Markovic 89a955e8df target/mips: Add disassembler support for nanoMIPS
Add disassembler support for nanoMIPS.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-25 22:13:33 +02:00
Peter Maydell b312532fd0 Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* RTC fixes (Artem)
* icount fixes (Artem)
* rr fixes (Pavel, myself)
* hotplug cleanup (Igor)
* SCSI fixes (myself)
* 4.20-rc1 KVM header update (myself)
* coalesced PIO support (Peng Hao)
* HVF fixes (Roman B.)
* Hyper-V refactoring (Roman K.)
* Support for Hyper-V IPI (Vitaly)

# gpg: Signature made Fri 19 Oct 2018 12:47:58 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (47 commits)
  replay: pass raw icount value to replay_save_clock
  target/i386: kvm: just return after migrate_add_blocker failed
  hyperv_testdev: add SynIC message and event testmodes
  hyperv: process POST_MESSAGE hypercall
  hyperv: add support for KVM_HYPERV_EVENTFD
  hyperv: process SIGNAL_EVENT hypercall
  hyperv: add synic event flag signaling
  hyperv: add synic message delivery
  hyperv: make overlay pages for SynIC
  hyperv: only add SynIC in compatible configurations
  hyperv: qom-ify SynIC
  hyperv:synic: split capability testing and setting
  i386: add hyperv-stub for CONFIG_HYPERV=n
  default-configs: collect CONFIG_HYPERV* in hyperv.mak
  hyperv: factor out arch-independent API into hw/hyperv
  hyperv: make hyperv_vp_index inline
  hyperv: split hyperv-proto.h into x86 and arch-independent parts
  hyperv: rename kvm_hv_sint_route_set_sint
  hyperv: make HvSintRoute reference-counted
  hyperv: address HvSintRoute by X86CPU pointer
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19 19:01:07 +01:00
Peter Maydell 31e213e306 Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20181018' into staging
Queued tcg patches.

# gpg: Signature made Fri 19 Oct 2018 07:03:20 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20181018: (21 commits)
  cputlb: read CPUTLBEntry.addr_write atomically
  target/s390x: Check HAVE_ATOMIC128 and HAVE_CMPXCHG128 at translate
  target/s390x: Skip wout, cout helpers if op helper does not return
  target/s390x: Split do_cdsg, do_lpq, do_stpq
  target/s390x: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128
  target/ppc: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128
  target/arm: Check HAVE_CMPXCHG128 at translate time
  target/arm: Convert to HAVE_CMPXCHG128
  target/i386: Convert to HAVE_CMPXCHG128
  tcg: Split CONFIG_ATOMIC128
  tcg: Add tlb_index and tlb_entry helpers
  cputlb: serialize tlb updates with env->tlb_lock
  cputlb: fix assert_cpu_is_self macro
  exec: introduce tlb_init
  target/unicore32: remove tlb_flush from uc32_init_fn
  target/alpha: remove tlb_flush from alpha_cpu_initfn
  tcg: distribute tcg_time into TCG contexts
  tcg: plug holes in struct TCGProfile
  tcg: fix use of uninitialized variable under CONFIG_PROFILER
  tcg: access cpu->icount_decr.u16.high with atomics
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19 16:17:32 +01:00
Peng HaoandPaolo Bonzini e6d34aeea6 target-i386 : add coalesced_pio API
the primary API realization.

Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1539795177-21038-3-git-send-email-peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19 13:44:11 +02:00
Zhang ChenandJason Wang 13af18f222 COLO: Load dirty pages into SVM's RAM cache firstly
We should not load PVM's state directly into SVM, because there maybe some
errors happen when SVM is receving data, which will break SVM.

We need to ensure receving all data before load the state into SVM. We use
an extra memory to cache these data (PVM's ram). The ram cache in secondary side
is initially the same as SVM/PVM's memory. And in the process of checkpoint,
we cache the dirty pages of PVM into this ram cache firstly, so this ram cache
always the same as PVM's memory at every checkpoint, then we flush this cached ram
to SVM after we receive all PVM's state.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19 11:15:03 +08:00
Emilio G. CotaandRichard Henderson 403f290c06 cputlb: read CPUTLBEntry.addr_write atomically
Updates can come from other threads, so readers that do not
take tlb_lock must use atomic_read to avoid undefined
behaviour (UB).

This completes the conversion to tlb_lock. This conversion results
on average in no performance loss, as the following experiments
(run on an Intel i7-6700K CPU @ 4.00GHz) show.

1. aarch64 bootup+shutdown test:

- Before:
 Performance counter stats for 'taskset -c 0 ../img/aarch64/die.sh' (10 runs):

       7487.087786      task-clock (msec)         #    0.998 CPUs utilized            ( +-  0.12% )
    31,574,905,303      cycles                    #    4.217 GHz                      ( +-  0.12% )
    57,097,908,812      instructions              #    1.81  insns per cycle          ( +-  0.08% )
    10,255,415,367      branches                  # 1369.747 M/sec                    ( +-  0.08% )
       173,278,962      branch-misses             #    1.69% of all branches          ( +-  0.18% )

       7.504481349 seconds time elapsed                                          ( +-  0.14% )

- After:
 Performance counter stats for 'taskset -c 0 ../img/aarch64/die.sh' (10 runs):

       7462.441328      task-clock (msec)         #    0.998 CPUs utilized            ( +-  0.07% )
    31,478,476,520      cycles                    #    4.218 GHz                      ( +-  0.07% )
    57,017,330,084      instructions              #    1.81  insns per cycle          ( +-  0.05% )
    10,251,929,667      branches                  # 1373.804 M/sec                    ( +-  0.05% )
       173,023,787      branch-misses             #    1.69% of all branches          ( +-  0.11% )

       7.474970463 seconds time elapsed                                          ( +-  0.07% )

2. SPEC06int:
                                              SPEC06int (test set)
                                           [Y axis: Speedup over master]
  1.15 +-+----+------+------+------+------+------+-------+------+------+------+------+------+------+----+-+
       |                                                                                                  |
   1.1 +-+.................................+++.............................+  tlb-lock-v2 (m+++x)       +-+
       |                                +++ |                   +++        tlb-lock-v3 (spinl|ck)         |
       |                    +++          |  |     +++    +++     |                           |            |
  1.05 +-+....+++...........####.........|####.+++.|......|.....###....+++...........+++....###.........+-+
       |      ###         ++#| #         |# |# ***### +++### +++#+#     |     +++     |     #|#    ###    |
     1 +-+++***+#++++####+++#++#++++++++++#++#+*+*++#++++#+#+****+#++++###++++###++++###++++#+#++++#+#+++-+
       |    *+* #    #++# ***  #   #### ***  # * *++# ****+# *| * # ****|#   |# #    #|#    #+#    # #    |
  0.95 +-+..*.*.#....#..#.*|*..#...#..#.*|*..#.*.*..#.*|.*.#.*++*.#.*++*+#.****.#....#+#....#.#..++#.#..+-+
       |    * * #    #  # *|*  #   #  # *|*  # * *  # *++* # *  * # *  * # * |* #  ++# #    # #  *** #    |
       |    * * #  ++#  # *+*  #   #  # *|*  # * *  # *  * # *  * # *  * # *++* # **** #  ++# #  * * #    |
   0.9 +-+..*.*.#...|#..#.*.*..#.++#..#.*|*..#.*.*..#.*..*.#.*..*.#.*..*.#.*..*.#.*.|*.#...|#.#..*.*.#..+-+
       |    * * #  ***  # * *  #  |#  # *+*  # * *  # *  * # *  * # *  * # *  * # *++* #   |# #  * * #    |
  0.85 +-+..*.*.#..*|*..#.*.*..#.***..#.*.*..#.*.*..#.*..*.#.*..*.#.*..*.#.*..*.#.*..*.#.****.#..*.*.#..+-+
       |    * * #  *+*  # * *  # *|*  # * *  # * *  # *  * # *  * # *  * # *  * # *  * # * |* #  * * #    |
       |    * * #  * *  # * *  # *+*  # * *  # * *  # *  * # *  * # *  * # *  * # *  * # * |* #  * * #    |
   0.8 +-+..*.*.#..*.*..#.*.*..#.*.*..#.*.*..#.*.*..#.*..*.#.*..*.#.*..*.#.*..*.#.*..*.#.*++*.#..*.*.#..+-+
       |    * * #  * *  # * *  # * *  # * *  # * *  # *  * # *  * # *  * # *  * # *  * # *  * #  * * #    |
  0.75 +-+--***##--***###-***###-***###-***###-***###-****##-****##-****##-****##-****##-****##--***##--+-+
 400.perlben401.bzip2403.gcc429.m445.gob456.hmme45462.libqua464.h26471.omnet473483.xalancbmkgeomean

  png: https://imgur.com/a/BHzpPTW

Notes:
- tlb-lock-v2 corresponds to an implementation with a mutex.
- tlb-lock-v3 corresponds to the current implementation, i.e.
  a spinlock and a single lock acquisition in tlb_set_page_with_attrs.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181016153840.25877-1-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18 19:46:53 -07:00
Richard Henderson 383beda9cf tcg: Add tlb_index and tlb_entry helpers
Isolate the computation of an index from an address into a
helper before we change that function.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ cota: convert tlb_vaddr_to_host; use atomic_read on addr_write ]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009175129.17888-2-cota@braap.org>
2018-10-18 18:58:10 -07:00
Emilio G. CotaandRichard Henderson 71aec3541d cputlb: serialize tlb updates with env->tlb_lock
Currently we rely on atomic operations for cross-CPU invalidations.
There are two cases that these atomics miss: cross-CPU invalidations
can race with either (1) vCPU threads flushing their TLB, which
happens via memset, or (2) vCPUs calling tlb_reset_dirty on their TLB,
which updates .addr_write with a regular store. This results in
undefined behaviour, since we're mixing regular and atomic ops
on concurrent accesses.

Fix it by using tlb_lock, a per-vCPU lock. All updaters of tlb_table
and the corresponding victim cache now hold the lock.
The readers that do not hold tlb_lock must use atomic reads when
reading .addr_write, since this field can be updated by other threads;
the conversion to atomic reads is done in the next patch.

Note that an alternative fix would be to expand the use of atomic ops.
However, in the case of TLB flushes this would have a huge performance
impact, since (1) TLB flushes can happen very frequently and (2) we
currently use a full memory barrier to flush each TLB entry, and a TLB
has many entries. Instead, acquiring the lock is barely slower than a
full memory barrier since it is uncontended, and with a single lock
acquisition we can flush the entire TLB.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009174557.16125-6-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18 18:58:10 -07:00
Emilio G. CotaandRichard Henderson 5005e2537d exec: introduce tlb_init
Paves the way for the addition of a per-TLB lock.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009174557.16125-4-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18 18:58:10 -07:00
Peter MaydellandPaolo Bonzini 62a0db942d memory: Remove old_mmio accessors
Now that all the users of old_mmio MemoryRegion accessors
have been converted, we can remove the core code support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180824170422.5783-2-peter.maydell@linaro.org>
Based-on: <20180802174042.29234-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02 19:09:14 +02:00
Hikaru NishidaandPaolo Bonzini d5dbde4645 hostmem-file: make available memory-backend-file on POSIX-based hosts
Before this change, memory-backend-file object is valid for Linux hosts
only because hostmem-file.c is compiled only on Linux hosts.
However, other POSIX-based hosts (such as macOS) can support
memory-backend-file object in the same way as on Linux hosts.
This patch makes hostmem-file.c and related functions to be compiled on
all POSIX-based hosts to make available memory-backend-file on them.

Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Message-Id: <20180924123205.29651-1-hikarupsp@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02 19:09:13 +02:00
Thomas HuthandDavid Gibson a69dc537cc ppc: Remove deprecated ppcemb target
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-28 11:31:23 +10:00
Peter Maydell 659b11e7a7 Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging
linux-user fixes:
- netlink fixes (add missing types, fix MSG_TRUNC)
- sh4 fix (tcg state)
- sparc32plus fix (truncate address space to 32bit)
- add x86_64 binfmt data

# gpg: Signature made Mon 20 Aug 2018 21:24:40 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
  linux-user: add QEMU_IFLA_INFO_KIND nested type for tun
  linux-user: update netlink route types
  linux-user: introduce QEMU_RTA_* to use with rtattr_type_t
  linux-user: fix recvmsg()/recvfrom() with netlink and MSG_TRUNC
  sh4: fix use_icount with linux-user
  linux-user: fix 32bit g2h()/h2g()
  qemu-binfmt-conf.sh: add x86_64 target

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-21 11:36:15 +01:00
Peter Maydell 55f4e79d79 Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc: fixes

This includes nvdimm persistence fixes queued before the release.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  migration/ram: ensure write persistence on loading all data to PMEM.
  migration/ram: Add check and info message to nvdimm post copy.
  mem/nvdimm: ensure write persistence to PMEM in label emulation
  hostmem-file: add the 'pmem' option
  configure: add libpmem support
  memory, exec: switch file ram allocation functions to 'flags' parameters
  memory, exec: Expose all memory block related flags.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-21 10:23:53 +01:00
Peter Maydell 8c1c245378 memory: Remove MMIO request_ptr APIs
Remove the obsolete MMIO request_ptr APIs; they have no
users now.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-3-peter.maydell@linaro.org
2018-08-20 11:24:32 +01:00